If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CD-R is very hot
lately the CDRs I burn are getting hot.
They werent cool before, but now they are real hot. I mean like baked. When a CDR (like everything else) gets hot it expands, then when it cools off it contracts. Does that damage it? Will it be readable? Is there risk of loss of data? Is this a good reason to stay away from CD-RWs? |
#2
|
|||
|
|||
On 27 Sep 2005 08:17:30 -0700, "Mr.Happy"
wrote: lately the CDRs I burn are getting hot. They werent cool before, but now they are real hot. I mean like baked. When a CDR (like everything else) gets hot it expands, then when it cools off it contracts. Does that damage it? Depends on how hot, but generally no, not in the short term at least. Will it be readable? Is there risk of loss of data? Why ask us? You have the discs undergoing this specific temp change, pop one into a drive and see if it's readable. Generally speaking, it can't "help" to have it hot while burning and cool when you tried to read from it. Is this a good reason to stay away from CD-RWs? Supposedly they're harder to read and thus the loss of data is higher. For a long time CDR discs were also practically free after rebate so most people seemed to prefer CDR. I would be more concerned about WHY the discs get hotter. If there is no significant increase in ambient (room) temps, it would seem more likely your fans are either failing or there is dust/debris/whatever builldup now obstructing airflow. It could be buildup in the fan exhaust but with a drive, it could instead be another drive you added below it (as many (if not all) optical drives use their bottom casing surface to 'sink heat from chips on their circuit boards) or it could be dust in the drive itself depositing in the vent holes. |
Thread Tools | |
Display Modes | |
|
|