If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Printing USB to Parallel
I've been printing so many test sheets, I'm going to run out of black
ink, but I have an old monocolor laser printer that only has a parallel port. (and it's not as black as it used to be which the manual says is a serious problem.) I also recently bought a USB to Parallel(CN36 Male / IEEE1284) Converter Cable - 6ft http://www.monoprice.com/product?c_i...seq=1&format=2 I know that having the right cable doesn't mean something will work. I once tried plugging the toaster into the kitchen faucet and that didn't work at all. Any chance I can under XP or Vista or 7 print to my parallel port printer with this cable? |
#2
|
|||
|
|||
Printing USB to Parallel
On 1/14/2016 2:30 AM, Micky wrote:
I've been printing so many test sheets, I'm going to run out of black ink, but I have an old monocolor laser printer that only has a parallel port. (and it's not as black as it used to be which the manual says is a serious problem.) I also recently bought a USB to Parallel(CN36 Male / IEEE1284) Converter Cable - 6ft http://www.monoprice.com/product?c_i...seq=1&format=2 I know that having the right cable doesn't mean something will work. I once tried plugging the toaster into the kitchen faucet and that didn't work at all. Any chance I can under XP or Vista or 7 print to my parallel port printer with this cable? Sure, there's a chance. I use a similar Belkin one on win7 to a laserjet 4mp. Works fine. |
#3
|
|||
|
|||
Printing USB to Parallel
[Default] On Thu, 14 Jan 2016 02:41:02 -0800, in
microsoft.public.windowsxp.general mike wrote: On 1/14/2016 2:30 AM, Micky wrote: I've been printing so many test sheets, I'm going to run out of black ink, but I have an old monocolor laser printer that only has a parallel port. (and it's not as black as it used to be which the manual says is a serious problem.) I also recently bought a USB to Parallel(CN36 Male / IEEE1284) Converter Cable - 6ft http://www.monoprice.com/product?c_i...seq=1&format=2 I know that having the right cable doesn't mean something will work. I once tried plugging the toaster into the kitchen faucet and that didn't work at all. Any chance I can under XP or Vista or 7 print to my parallel port printer with this cable? Sure, there's a chance. I use a similar Belkin one on win7 to a laserjet 4mp. Works fine. That's great. I'll try it. It's also sort of good to know they're not selling something with no use. (it wasn't expensive.) First I may try refilling the black cartridge, but I expect sensor problems. I suppose I should fill it before the printer tells me it's empty?? But I still expect sensor problems. Maybe I should see a therapist. |
#4
|
|||
|
|||
Printing USB to Parallel
On 14/01/2016 10:30, Micky wrote:
I've been printing so many test sheets, I'm going to run out of black ink, but I have an old monocolor laser printer that only has a parallel port. (and it's not as black as it used to be which the manual says is a serious problem.) I also recently bought a USB to Parallel(CN36 Male / IEEE1284) Converter Cable - 6ft http://www.monoprice.com/product?c_i...seq=1&format=2 I know that having the right cable doesn't mean something will work. I once tried plugging the toaster into the kitchen faucet and that didn't work at all. Any chance I can under XP or Vista or 7 print to my parallel port printer with this cable? I have a similar cable which enables a printer with a parallel (Centronics) port to be connected to a computer's USB port. Mine works perfectly well on Windows 7 with an old HP Deskjet printer. The one you cite should work ok with your laser printer provided you have the appropriate printer driver installed. Any lack of "blackness" is likely to be an issue with the printer itself, and nothing to do with the cable. -- Cheers, Roger ____________ Please reply to Newsgroup. Whilst email address is valid, it is seldom checked. |
#5
|
|||
|
|||
Printing USB to Parallel
On Thu, 14 Jan 2016 11:34:32 +0000, Roger Mills wrote:
Any lack of "blackness" is likely to be an issue with the printer itself, and nothing to do with the cable. Expired toner? Is that possible? |
#6
|
|||
|
|||
Printing USB to Parallel
On Thu, 14 Jan 2016 20:26:48 +0700, JJ wrote:
On Thu, 14 Jan 2016 11:34:32 +0000, Roger Mills wrote: Any lack of "blackness" is likely to be an issue with the printer itself, and nothing to do with the cable. Expired toner? Is that possible? Not what the owners manual said. I forget what it said but it was an expensive fix. It's not that light, and it's even, so I can still use it. |
#7
|
|||
|
|||
Printing USB to Parallel
Micky wrote:
On Thu, 14 Jan 2016 20:26:48 +0700, JJ wrote: On Thu, 14 Jan 2016 11:34:32 +0000, Roger Mills wrote: Any lack of "blackness" is likely to be an issue with the printer itself, and nothing to do with the cable. Expired toner? Is that possible? Not what the owners manual said. I forget what it said but it was an expensive fix. It's not that light, and it's even, so I can still use it. Back in the old days, the drum was made of glass, and could cost $300 to replace. You should be able to go through many toner cartridges, before the page count gets you into "drum replacement territory". My drum experiences come from a Canon laser with liquid toner. The toner is flammable on those (liquid material is petroleum based). Later laser designs, used a plastic belt to hold the static charge. On some, the belt was a separate item. On others, the belt was a part of the toner cartridge. The idea being, if you scratched that sucker, it meant a much cheaper repair. People sometimes scratch that stuff, while yanking jammed sheets of paper from the printer. On some printers, part of the print path has no release, so you have to yank. You want the printer paper advancement wheels and stuff, to be clean enough that you don't get frequent paper jams. This is easier said than done. I've seen repair techs waste hours cleaning our equipment at work. Even the devices with "vacuum advance" paper handling, eventually even they eventually succumbed to paper dust. No paper handling technology is completely immune to "aging". Good paper handling lasts for maybe two years, before you're "always cleaning it and fiddling with it". On a drum, you replace them when there is a "blemish" in the same place on each print. It wouldn't necessarily be a "black level" problem. It would be a "scratch" in the print, perhaps. The laser printer works by "drawing" a pattern on a photosensitive drum or belt. The surface holds a static charge, The static charge is removed in places you don't want toner. The toner is "attracted" to the drum or belt. As the sheet of paper makes contact with the drum, the "fuser" melts the toner particles so they adhere to the paper. If your fuser isn't working, you will find the black toner on the paper smudges and comes off on your fingers. In isolation, a single toner particle behaves well to a single charged spot on the drum or belt. When you try to define an "all-black" area, now the toner particles see the electrostatic behavior of their neighbors. A non-uniform toner coating can result. This causes "blotches" in the toner transferred to the paper. You don't get a uniform black. As a result, you should try to avoid creating "all black images" for a B&W laser printout. Printing text should work fine. Toner comes in various grades. There are regular toners and "fine" toners. Perhaps if you're buying "refills", they don't have the same consistency as a branded product. You would need a good microscope to see the difference. What you see in the print, "tells you a story". Paul |
#8
|
|||
|
|||
Printing USB to Parallel
On 1/14/2016 4:41 AM, mike wrote:
On 1/14/2016 2:30 AM, Micky wrote: I've been printing so many test sheets, I'm going to run out of black ink, but I have an old monocolor laser printer that only has a parallel port. (and it's not as black as it used to be which the manual says is a serious problem.) I also recently bought a USB to Parallel(CN36 Male / IEEE1284) Converter Cable - 6ft http://www.monoprice.com/product?c_i...seq=1&format=2 I know that having the right cable doesn't mean something will work. I once tried plugging the toaster into the kitchen faucet and that didn't work at all. Any chance I can under XP or Vista or 7 print to my parallel port printer with this cable? Sure, there's a chance. I use a similar Belkin one on win7 to a laserjet 4mp. Works fine. Before you buy the cable, look at your motherboard, it may already have a parallel port header that simply was not used. |
#9
|
|||
|
|||
Printing USB to Parallel
From: "Micky"
[Default] On Thu, 14 Jan 2016 02:41:02 -0800, in microsoft.public.windowsxp.general mike wrote: On 1/14/2016 2:30 AM, Micky wrote: I've been printing so many test sheets, I'm going to run out of black ink, but I have an old monocolor laser printer that only has a parallel port. (and it's not as black as it used to be which the manual says is a serious problem.) I also recently bought a USB to Parallel(CN36 Male / IEEE1284) Converter Cable - 6ft http://www.monoprice.com/product?c_i...seq=1&format=2 I know that having the right cable doesn't mean something will work. I once tried plugging the toaster into the kitchen faucet and that didn't work at all. Any chance I can under XP or Vista or 7 print to my parallel port printer with this cable? Sure, there's a chance. I use a similar Belkin one on win7 to a laserjet 4mp. Works fine. That's great. I'll try it. It's also sort of good to know they're not selling something with no use. (it wasn't expensive.) snip It depends on who manufacturers it. Some embedded chip-sets don't work as well as other. -- Dave Multi-AV Scanning Tool - http://multi-av.thespykiller.co.uk http://www.pctipp.ch/downloads/dl/35905.asp |
#10
|
|||
|
|||
Printing USB to Parallel
I have a generic USB to parallel port cable I use with my Windows 7 Pro
laptop and a HP r80xi printer I purchased in 2000 so it is pretty old and I am waiting for the day I can no longer buy ink cartridges for it. The only advice I have is plug in the cable into computer before you turn on the printer. Of course I do not leave it attached to the laptop which gets moved around. -- Bill Brought to you from Anchorage, Alaska "Micky" wrote in message ... I've been printing so many test sheets, I'm going to run out of black ink, but I have an old monocolor laser printer that only has a parallel port. (and it's not as black as it used to be which the manual says is a serious problem.) I also recently bought a USB to Parallel(CN36 Male / IEEE1284) Converter Cable - 6ft http://www.monoprice.com/product?c_i...seq=1&format=2 I know that having the right cable doesn't mean something will work. I once tried plugging the toaster into the kitchen faucet and that didn't work at all. Any chance I can under XP or Vista or 7 print to my parallel port printer with this cable? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NVIDIA REVEALS THE FUTURE OF PARALLEL COMPUTING: PARALLEL COOKIES ! | Skybuck Flying[_7_] | Nvidia Videocards | 0 | April 1st 14 09:25 AM |
Printing to parallel-printer from USB? | Masa | Printers | 9 | February 11th 08 10:41 PM |
Parallel to USB: HP Bi-Tronics Parallel Interface" ? | [email protected] | Printers | 1 | January 9th 06 08:50 PM |
Local Parallel printer not printing in terminal services when machine is not a member of the Domain | [email protected] | Printers | 0 | April 8th 05 05:54 PM |
Printing: Parallel Port PC to USB Printer Port converter needed | ptrwrb | General Hardware | 1 | March 7th 05 06:10 PM |