If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Can you run FSB@200 but memory@166 with Asus A7V8X-X?
There have been a couple of posts lately about overclocking XP2500 or
XP2400 CPUs to use 200FSB but nothing quite answers my question. I have a multiplier locked XP2500 running at default (166x11 = 1826Mhz) with PC2700 (DDR333) ram running at the 166Mhz setting in the bios. I don't want to buy any new components (no money at the moment) but i have the opportunity to get a Asus A7N8X-X motherboard off a friend. So here's my question. Assuming my XP2500 will run stable at 200x11 (lets just assume that it can), will i be able to use my PC2700 ram without overclocking it to DDR400 speeds? The ram is cheap generic pc2700 so i doubt it will take the overclocking. I remember an old motherboard let me run my CPU at 133Mhz and i had the choice of running the Ram at either 133 or 100. I'm hoping maybe the Asus A7N8x-x will let me run the cpu at 200 while running the memory at 166? Any thoughts appreciated. |
#2
|
|||
|
|||
kevins_news2 wrote:
There have been a couple of posts lately about overclocking XP2500 or XP2400 CPUs to use 200FSB but nothing quite answers my question. I have a multiplier locked XP2500 running at default (166x11 = 1826Mhz) with PC2700 (DDR333) ram running at the 166Mhz setting in the bios. I don't want to buy any new components (no money at the moment) but i have the opportunity to get a Asus A7N8X-X motherboard off a friend. So here's my question. Assuming my XP2500 will run stable at 200x11 (lets just assume that it can), will i be able to use my PC2700 ram without overclocking it to DDR400 speeds? The ram is cheap generic pc2700 so i doubt it will take the overclocking. I remember an old motherboard let me run my CPU at 133Mhz and i had the choice of running the Ram at either 133 or 100. I'm hoping maybe the Asus A7N8x-x will let me run the cpu at 200 while running the memory at 166? Any thoughts appreciated. I'm not sure how fast your memorys can go but the way to get a good fsb speed is to go to the agp bus speed in bios and it's probably on auto.You have to change that to 66 as the pci bus are connected to it and do the half speed of it.Then you have the right pci bus speed whatever you do with your fsb settings.Keep your multiplier on 11 and raise your frontsidebus speed to 196 or something.And keep an eye on your memory speed and try out different settings from there.You can run your memorys at 80 % of the frontsidebus speed and you change that in bios as well. god luck al ps I run mine barton 2500 at 11/ 200 and my memorys works in the same speed as well.Apacer are the brand 7-4-4-3 optimal |
#3
|
|||
|
|||
On Thu, 12 Aug 2004 16:05:55 GMT, kevins_news2
wrote: There have been a couple of posts lately about overclocking XP2500 or XP2400 CPUs to use 200FSB but nothing quite answers my question. I have a multiplier locked XP2500 running at default (166x11 = 1826Mhz) with PC2700 (DDR333) ram running at the 166Mhz setting in the bios. I don't want to buy any new components (no money at the moment) but i have the opportunity to get a Asus A7N8X-X motherboard off a friend. So here's my question. Assuming my XP2500 will run stable at 200x11 (lets just assume that it can), will i be able to use my PC2700 ram without overclocking it to DDR400 speeds? The ram is cheap generic pc2700 so i doubt it will take the overclocking. I remember an old motherboard let me run my CPU at 133Mhz and i had the choice of running the Ram at either 133 or 100. I'm hoping maybe the Asus A7N8x-x will let me run the cpu at 200 while running the memory at 166? Any thoughts appreciated. Whoops. I mean an A7N8x-x motherboard. |
#4
|
|||
|
|||
Whoops. I mean an A7N8x-x motherboard. yes but I guess they are just the same when it comes to pci bus speeds- Have a look |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Asus A7V8X and a XP 2500 AMD, help | Bradley Moser | Overclocking AMD Processors | 12 | July 29th 04 07:23 PM |
Malfunctioning Drive Controller on ASUS A7V8X? | Ignacy Sawicki | Asus Motherboards | 4 | July 27th 04 09:41 AM |
Sound V heatsink on Asus A7V8X | Tom Corcoran | Homebuilt PC's | 3 | February 2nd 04 01:19 PM |
recomended Bios Settings Asus a7v8x - ati9800pro | James Johnson | Asus Motherboards | 0 | December 12th 03 03:51 AM |
Asus DVD E616 will not update firmware | TheCroW | Asus Motherboards | 6 | November 30th 03 08:45 PM |