A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Compaq Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Compaq Deskpro EN Model/BIOS/Drivers



 
 
Thread Tools Display Modes
  #1  
Old March 3rd 05, 01:47 AM
JoeC
external usenet poster
 
Posts: n/a
Default Compaq Deskpro EN Model/BIOS/Drivers


Ben,

Thanks for the reply. I was at my son's house this weekend when I
posted this request. Passed your reply on to him since I do not have
access to his machine now that I am home.

Anyway, the operating system is Windows 2000. The form factor for the
system unit in question is a tower maybe about 2/3 as high as the
"standard" or full-size tower. I think the machine is in the 2000-2001
era time frame.

Ben Myers Wrote:
What model of computer is it? What model indeed? Is the chassis a
full-sized
desktop, a larger tower, or a small square desktop about the same size
as a
stack of three pizza boxes with medium-sized pizzas inside. The
DeskPro EN
designation applies to all of them. If you can find a transparent
decal sticker
somewhere on the system, the writing on it will describe the model.

The system BIOS recognizes the devices. That is not the problem. What
is
missing are the software drivers for the devices. No matter which
model noted
above, the chipsets used by Intel on DeskPro P3 systems are Intel
chipsets.
Which operating system is running on the computer? No matter. Go to
www.intel.com and download at least three sets of drivers. Look for
the drivers
according to chipset, or just look up ANY Intel 815 chipset motherboard
made by
Intel and download the drivers. The Intel drivers work correctly in
any system
that uses Intel chipsets.

1. basic Intel 815 motherboard chipset drivers. Install these FIRST!
2. Intel 815 graphics drivers
3. Intel Ethernet drivers. Which ones? Open up the chassis and look
for an
Intel chip marked 82557, 82558, or 82559. The Ethernet chip is one of
these.

For audio, you need to look for the audio chip on the motherboard. It
is
probably an ADI chip and the drivers are AC '97. Beyond this, I'm not
too sure
where you can find the drivers, except that Compaq more or less
modified Intel
motherboard designs to come up with the ones for the P3 DeskPros.
"Modified" in
a logical sense. Physically, the Compaq motherboards are quite
different from
the Intel ones, sometimes VERY different... Ben Myers


On Mon, 28 Feb 2005 20:03:11 +0000, JoeC

wrote:
-

Compaq Deskpro EN. Pentium III processor 1000 MHz. Processor Speed
1000/133 MHz. Memory 384 MB/133 MHz. S/N 6X18-DYSZ-J1PX. System ROM
686P2 v2.11. Agency series PD1055. SC-148. Card in green slot:
HYM4V33100BTWG-75CE; HYMIX0125USA; 4MB AIMM 133 MHz CL3. No cards in
PCI slots. Windows 2000. Have no manuals or recovery disks.

Unit powers on permitting only VGA mode 16 colors (monitor is capable
of more). Basic windows apps run ok but system info "problem devices"
show:
(a) Ethernet Controller PCI bus 2, device 8 fcn 0
(b) Multimedia Audio Controller PCI bus 0, device 31, fcn 5
(c) Video Controller (VGA Compat) PCI bus 0, device 2, fcn 0
All above show an error code of 28. No drives installed since the
manufacturer is not known. Hard drive, USB port, serial ports and
parallel ports all ok.

Both of the following questions have been posed in this forum this
January; however, the question still remains.

Problem 1: How can I determine what model this is? Contacted HP for
information and informed that warranty for this serial number ended
Sep2004. They would not even tell me the model number!

Problem 2: Power on unit hold F10 down but unable to get what has been
called the BIOS window. Just get the white on black window to select
information like system, security, etc. Able to get BIOS data showing
version installed. Downloaded the BIOS update SP22200 for v3.14 and
followed instructions to make the update diskette. Place diskette in
unit and power on and with or without F10 procedure only get message
"non-system disk". Unable to update BIOS. What am I doing wrong?

Problem 3: It is possible I could live with BIOS V2.11 if only I could
find the drivers for the three problem devices; however, I need the
model number for this approach. Not sure if the basic problem is in
the
BIOS (not recognizing the hardware; thus, no drivers found) or if the
hardware is known but do not have the drivers for it. Any ideas?

Thanks.


--
JoeC-



--
JoeC
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compaq FAQ HH Compaq Computers 0 October 17th 04 12:49 PM
Compaq FAQ HH Compaq Computers 0 October 10th 04 12:49 PM
Compaq FAQ HH Compaq Computers 0 July 31st 04 02:23 PM
Compaq FAQ HH Compaq Computers 0 July 3rd 04 04:25 AM
Compaq ready to go Jazzy Ban Compaq Computers 0 October 14th 03 02:54 PM


All times are GMT +1. The time now is 01:59 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.