A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Compaq Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Compaq Presario 1275



 
 
Thread Tools Display Modes
  #1  
Old July 11th 04, 10:34 PM
Mike Hunt
external usenet poster
 
Posts: n/a
Default Compaq Presario 1275

I got a Presario 1275 from a family member. Didn't get the restore cd
with it. I reformatted and loaded up a copy of win 98se. I runs really
well except for the video. Using the drivers on the 98se cd can only
get 640x480. I suspect the video driver I need is on the restore cd.
Anyone know where I might get the driver? I have tried Compaq(HP).
Nothing there.Thanks.
  #2  
Old July 11th 04, 11:55 PM
HH
external usenet poster
 
Posts: n/a
Default

Try he

http://www.video-drivers.com/drivers/45/45264.htm

HH


"Mike Hunt" wrote in message
...
I got a Presario 1275 from a family member. Didn't get the restore cd
with it. I reformatted and loaded up a copy of win 98se. I runs really
well except for the video. Using the drivers on the 98se cd can only
get 640x480. I suspect the video driver I need is on the restore cd.
Anyone know where I might get the driver? I have tried Compaq(HP).
Nothing there.Thanks.




  #3  
Old July 12th 04, 02:11 AM
Mike Hunt
external usenet poster
 
Posts: n/a
Default

On Sun, 11 Jul 2004 18:55:53 -0400, "HH" wrote:

Try he

http://www.video-drivers.com/drivers/45/45264.htm

HH


"Mike Hunt" wrote in message
.. .
I got a Presario 1275 from a family member. Didn't get the restore cd
with it. I reformatted and loaded up a copy of win 98se. I runs really
well except for the video. Using the drivers on the 98se cd can only
get 640x480. I suspect the video driver I need is on the restore cd.
Anyone know where I might get the driver? I have tried Compaq(HP).
Nothing there.Thanks.



Thanks for the reply. But I tried that one and it didn't work. It
wouldn't install. Anywhere else??
  #4  
Old July 12th 04, 06:54 AM
TheGarbageGuy
external usenet poster
 
Posts: n/a
Default

On the way Mike!

Hope This Helps

With best regards, TheGarbageGuy. E-mail:


  #5  
Old July 29th 04, 04:11 PM
Freon
external usenet poster
 
Posts: n/a
Default

Hi.

I also need that driver, but couldn't find it. TheGarbageGuy, would
you be so kind and email it to me or however you gave it to Mike?
flyersjared2002@yahoo(lala)com Thanks in advance!

/j

==============
Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups.
  #6  
Old September 29th 04, 06:23 AM
AKRICK
external usenet poster
 
Posts: n/a
Default

I say yes please to that as well. I have gotten the drivers from compaq
site for windows 95, but for some unknown reason they will not install
under 98 or 2000, I get some destination error message in the middle of
the setup. Any thoughts about this or is their another driver floating
around here that would work? Thanks for any help.

Rick

  #7  
Old September 29th 04, 06:23 AM
AKRICK
external usenet poster
 
Posts: n/a
Default

I say yes please to that as well. I have gotten the drivers from compaq
site for windows 95, but for some unknown reason they will not install
under 98 or 2000, I get some destination error message in the middle of
the setup. Any thoughts about this or is their another driver floating
around here that would work? Thanks for any help.

Rick

  #8  
Old September 29th 04, 11:49 AM
HH
external usenet poster
 
Posts: n/a
Default

Without including the previous message(s) we have no idea what driver you
are referring to.
HH

"AKRICK" wrote in message
lkaboutcomputing.com...
I say yes please to that as well. I have gotten the drivers from compaq
site for windows 95, but for some unknown reason they will not install
under 98 or 2000, I get some destination error message in the middle of
the setup. Any thoughts about this or is their another driver floating
around here that would work? Thanks for any help.

Rick




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compaq FAQ HH Compaq Computers 0 July 10th 04 11:39 AM
Compaq FAQ HH Compaq Computers 0 July 3rd 04 04:25 AM
Compaq FAQ HH Compaq Computers 0 June 27th 04 06:21 PM
Compaq FAQ ** New Link HH Compaq Computers 0 June 19th 04 11:47 AM
Compaq user diagnostics diskette bananaboat Compaq Computers 3 April 21st 04 03:05 AM


All times are GMT +1. The time now is 06:07 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.