If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
epson perfection 600 software?
Anyone know of any freeware that will let the old epson perfection 600 scsi
scanner work with Winxp? Epson never did xp drivers. Thanks |
#2
|
|||
|
|||
Have you tried epson soft for some similar model like 660?
"Crhoff" wrote in message ... Anyone know of any freeware that will let the old epson perfection 600 scsi scanner work with Winxp? Epson never did xp drivers. Thanks |
#3
|
|||
|
|||
"Crhoff" wrote in message ... Anyone know of any freeware that will let the old epson perfection 600 scsi scanner work with Winxp? Epson never did xp drivers. Thanks Have you tried this driver for NT 4.0? XP is NT 5.1. Who knows, it may work. When XP complains about the driver not being signed, Click "Continue Anyway". Try TWAIN Driver v3.7.7 http://www.epson.com/cgi-bin/Store/s...atform=Windows -- CSM1 http://www.carlmcmillan.com -- |
#4
|
|||
|
|||
That's a self extracting exe file which installs and put the the stuff in
Twain32 which is ok, but there in nothing the install new hardware wizzard recognizes as a driver, cause it's probably looking for an inf file. I can select the twain32 as a source from a program for scanning put it won't work. Don't know if it's the twain32 or the computer just doesn't think it's installed. Any ideas will be appreciated. m "CSM1" wrote in message . com... "Crhoff" wrote in message ... Anyone know of any freeware that will let the old epson perfection 600 scsi scanner work with Winxp? Epson never did xp drivers. Thanks Have you tried this driver for NT 4.0? XP is NT 5.1. Who knows, it may work. When XP complains about the driver not being signed, Click "Continue Anyway". Try TWAIN Driver v3.7.7 http://www.epson.com/cgi-bin/Store/s...atform=Windows -- CSM1 http://www.carlmcmillan.com -- |
#5
|
|||
|
|||
That is not what I saw when PERF377B.EXE is run .
It first opens a window that says it is a self-extracting file. You click OK, then you get another window with some information about where the self-extractor is going to put the files and two check boxes, one is permission to overwrite files and the other is to automatically run Setup after the files are extracted into the folder designed in the text box. (You can change the extraction location to one of you own choosing.) Choose a location that YOU want to extract the files, uncheck the "When Done Unzipping run SETUP.EXE". I suggest unzipping to C:\Epson600. Click Unzip. You can find that location with Windows Explorer, then double click Setup.exe. When SETUP.exe is run (by you double clicking it). Setup.exe starts the Windows Install wizard. Since I do not have a Epson 600 scanner, I will not try to install the driver on my Windows XP computer. Therefore I do not know what the installer does after double clicking Setup.exe, other that starting the installation process. You must have a PCI SCSI card that works in Windows XP to connect the Epson 600 scanner to. That is a separate issue. Get a SCSI card that is XP compatible, and XP will have no problem with the SCSI card. You also will have to install the ASPI layer for Windows XP from Adaptec. http://www.adaptec.com/worldwide/sup...supportinde x Or start he http://www.adaptec.com/ Click Support then SCSI software. You may want to read the FAQs on the Epson 600. http://www.epson.com/cgi-bin/Store/s...egory=Products Q6 says the Windows NT requires a SCSI interface for this scanner, because the parallel port in Window XP does not work well with scanners. Windows XP is a later version of NT. It is really time to buy a new scanner. For around $100, you can get a very good scanner with more resolution than the 600 DPI of the Epson 600. Trying to get the Epson 600 to work in Window XP is probably more work than it is worth. -- CSM1 http://www.carlmcmillan.com -- "Crhoff" wrote in message ... That's a self extracting exe file which installs and put the the stuff in Twain32 which is ok, but there in nothing the install new hardware wizzard recognizes as a driver, cause it's probably looking for an inf file. I can select the twain32 as a source from a program for scanning put it won't work. Don't know if it's the twain32 or the computer just doesn't think it's installed. Any ideas will be appreciated. m "CSM1" wrote in message . com... "Crhoff" wrote in message ... Anyone know of any freeware that will let the old epson perfection 600 scsi scanner work with Winxp? Epson never did xp drivers. Thanks Have you tried this driver for NT 4.0? XP is NT 5.1. Who knows, it may work. When XP complains about the driver not being signed, Click "Continue Anyway". Try TWAIN Driver v3.7.7 http://www.epson.com/cgi-bin/Store/s...atform=Windows -- CSM1 http://www.carlmcmillan.com -- |
#6
|
|||
|
|||
It does everything you said and when you run setup it puts the stuff in
Twain32 where it belongs. It's just that it doesn't work and the found hardware wizzard still comes up and wants to install and now matter what I tell it it can't find a driver. My computer has a SCSI card that works ok in win xp and I did have the ASPI layer installed. Like you say, it's time for a new scanner. The reason I wanted to use this one is because it does 11X14 legal and they are harder to find. Thanks again. "CSM1" wrote in message . com... That is not what I saw when PERF377B.EXE is run . It first opens a window that says it is a self-extracting file. You click OK, then you get another window with some information about where the self-extractor is going to put the files and two check boxes, one is permission to overwrite files and the other is to automatically run Setup after the files are extracted into the folder designed in the text box. (You can change the extraction location to one of you own choosing.) Choose a location that YOU want to extract the files, uncheck the "When Done Unzipping run SETUP.EXE". I suggest unzipping to C:\Epson600. Click Unzip. You can find that location with Windows Explorer, then double click Setup.exe. When SETUP.exe is run (by you double clicking it). Setup.exe starts the Windows Install wizard. Since I do not have a Epson 600 scanner, I will not try to install the driver on my Windows XP computer. Therefore I do not know what the installer does after double clicking Setup.exe, other that starting the installation process. You must have a PCI SCSI card that works in Windows XP to connect the Epson 600 scanner to. That is a separate issue. Get a SCSI card that is XP compatible, and XP will have no problem with the SCSI card. You also will have to install the ASPI layer for Windows XP from Adaptec. http://www.adaptec.com/worldwide/sup...supportinde x Or start he http://www.adaptec.com/ Click Support then SCSI software. You may want to read the FAQs on the Epson 600. http://www.epson.com/cgi-bin/Store/s...egory=Products Q6 says the Windows NT requires a SCSI interface for this scanner, because the parallel port in Window XP does not work well with scanners. Windows XP is a later version of NT. It is really time to buy a new scanner. For around $100, you can get a very good scanner with more resolution than the 600 DPI of the Epson 600. Trying to get the Epson 600 to work in Window XP is probably more work than it is worth. -- CSM1 http://www.carlmcmillan.com -- "Crhoff" wrote in message ... That's a self extracting exe file which installs and put the the stuff in Twain32 which is ok, but there in nothing the install new hardware wizzard recognizes as a driver, cause it's probably looking for an inf file. I can select the twain32 as a source from a program for scanning put it won't work. Don't know if it's the twain32 or the computer just doesn't think it's installed. Any ideas will be appreciated. m "CSM1" wrote in message . com... "Crhoff" wrote in message ... Anyone know of any freeware that will let the old epson perfection 600 scsi scanner work with Winxp? Epson never did xp drivers. Thanks Have you tried this driver for NT 4.0? XP is NT 5.1. Who knows, it may work. When XP complains about the driver not being signed, Click "Continue Anyway". Try TWAIN Driver v3.7.7 http://www.epson.com/cgi-bin/Store/s...atform=Windows -- CSM1 http://www.carlmcmillan.com -- |
#7
|
|||
|
|||
The only other thing you can do, is have an older computer that is running
Windows 95 or maybe Windows 98 for that old scanner. Maybe you mean 8.5 X 14 for legal size. There are scanners that will support legal sized paper. http://www.microtekusa.com/smi700.html And HP has scanners with a Automatic Document Feeder that does 8.5 X 14. -- CSM1 http://www.carlmcmillan.com -- "Crhoff" wrote in message ... It does everything you said and when you run setup it puts the stuff in Twain32 where it belongs. It's just that it doesn't work and the found hardware wizzard still comes up and wants to install and now matter what I tell it it can't find a driver. My computer has a SCSI card that works ok in win xp and I did have the ASPI layer installed. Like you say, it's time for a new scanner. The reason I wanted to use this one is because it does 11X14 legal and they are harder to find. Thanks again. "CSM1" wrote in message . com... That is not what I saw when PERF377B.EXE is run . It first opens a window that says it is a self-extracting file. You click OK, then you get another window with some information about where the self-extractor is going to put the files and two check boxes, one is permission to overwrite files and the other is to automatically run Setup after the files are extracted into the folder designed in the text box. (You can change the extraction location to one of you own choosing.) Choose a location that YOU want to extract the files, uncheck the "When Done Unzipping run SETUP.EXE". I suggest unzipping to C:\Epson600. Click Unzip. You can find that location with Windows Explorer, then double click Setup.exe. When SETUP.exe is run (by you double clicking it). Setup.exe starts the Windows Install wizard. Since I do not have a Epson 600 scanner, I will not try to install the driver on my Windows XP computer. Therefore I do not know what the installer does after double clicking Setup.exe, other that starting the installation process. You must have a PCI SCSI card that works in Windows XP to connect the Epson 600 scanner to. That is a separate issue. Get a SCSI card that is XP compatible, and XP will have no problem with the SCSI card. You also will have to install the ASPI layer for Windows XP from Adaptec. http://www.adaptec.com/worldwide/sup...supportinde x Or start he http://www.adaptec.com/ Click Support then SCSI software. You may want to read the FAQs on the Epson 600. http://www.epson.com/cgi-bin/Store/s...egory=Products Q6 says the Windows NT requires a SCSI interface for this scanner, because the parallel port in Window XP does not work well with scanners. Windows XP is a later version of NT. It is really time to buy a new scanner. For around $100, you can get a very good scanner with more resolution than the 600 DPI of the Epson 600. Trying to get the Epson 600 to work in Window XP is probably more work than it is worth. -- CSM1 http://www.carlmcmillan.com -- "Crhoff" wrote in message ... That's a self extracting exe file which installs and put the the stuff in Twain32 which is ok, but there in nothing the install new hardware wizzard recognizes as a driver, cause it's probably looking for an inf file. I can select the twain32 as a source from a program for scanning put it won't work. Don't know if it's the twain32 or the computer just doesn't think it's installed. Any ideas will be appreciated. m "CSM1" wrote in message . com... "Crhoff" wrote in message ... Anyone know of any freeware that will let the old epson perfection 600 scsi scanner work with Winxp? Epson never did xp drivers. Thanks Have you tried this driver for NT 4.0? XP is NT 5.1. Who knows, it may work. When XP complains about the driver not being signed, Click "Continue Anyway". Try TWAIN Driver v3.7.7 http://www.epson.com/cgi-bin/Store/s...atform=Windows -- CSM1 http://www.carlmcmillan.com -- |
#8
|
|||
|
|||
go to www.driver.com
I think you will find a driver there for the 660 griff "AS" wrote in message ... Have you tried epson soft for some similar model like 660? "Crhoff" wrote in message ... Anyone know of any freeware that will let the old epson perfection 600 scsi scanner work with Winxp? Epson never did xp drivers. Thanks |
#9
|
|||
|
|||
Tried 660 and it doesn't work, but thanks. Think www.driverguide.com is
what you ment. "BG" wrote in message ... go to www.driver.com I think you will find a driver there for the 660 griff "AS" wrote in message ... Have you tried epson soft for some similar model like 660? "Crhoff" wrote in message ... Anyone know of any freeware that will let the old epson perfection 600 scsi scanner work with Winxp? Epson never did xp drivers. Thanks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Epson Scan Fails to Load for Perfection 3170 | dc | Scanners | 6 | March 30th 05 03:36 PM |
Epson perfection 600 Twain Question | Crhoff | Scanners | 3 | December 28th 04 03:31 PM |
Canon Canoscan 3200F or Epson Perfection 1670 | Jose Ortega | Scanners | 0 | September 18th 04 12:03 PM |
Epson Perfection 3200/Mac ok with USB, hangs with FW | Daniel P. B. Smith | Scanners | 0 | November 15th 03 04:17 PM |
Epson Perfection 1200 Film Adapter - Will It Work With An Epson GT 7000 ? | WhiteDwarf500 | Scanners | 1 | November 13th 03 10:43 AM |