A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Gigabyte Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Power Supply Connector



 
 
Thread Tools Display Modes
  #1  
Old December 13th 13, 03:17 AM posted to alt.comp.periphs.mainboard.gigabyte
Hidden
external usenet poster
 
Posts: 2
Default Power Supply Connector

When buying a power supply for a motherboard do you have to check
which connector type it has for the motherboard before purchase. I see
that some motherboard require different plug types and wasn't sure if
they come with different connectors.
  #2  
Old December 13th 13, 04:52 AM posted to alt.comp.periphs.mainboard.gigabyte
Paul
external usenet poster
 
Posts: 13,364
Default Power Supply Connector

Hidden wrote:
When buying a power supply for a motherboard do you have to check
which connector type it has for the motherboard before purchase. I see
that some motherboard require different plug types and wasn't sure if
they come with different connectors.


(Desktop) Boards have two power connectors.

(Server motherboards have a great many power connectors,
and are a bit confusing. Desktops are easy.)

The most modern power supply, has a 20+4 connector. Typically,
the PSU connector detaches into two pieces. The four pin piece
is of no use by itself. The four pin piece has four
different colored wires. The two portions are wrapped together
so they can't get separated. The four pin section was added,
to make room for more amperes of current. The four pin section
does not add any new or different voltages. It is for this
reason, that the four pin section doesn't always need to be
connected. If the application doesn't need more amperes
of current, it doesn't have to be plugged in.

This site has pictures. Simply copy a link to a picture
here, if you have a question.

http://www.playtool.com/pages/psucon...onnectors.html

You can plug a 20 into a 24. You can plug a 24 into a 20.
If the 24 does not detach, the four pin section could
"hang over the end". More frequently, the 24 is a 20+4
and it detaches to handle either kind of motherboard.
A 20+4 can handle a 20 or a 24 motherboard.

You can plug an old 20 pin PSU into a 24 pin motherboard, if:

1) You're using one PCI Express video card only.
A 6600 video card draws 4 amps from +12V on the main connector.
Other cards draw less current on the single yellow wire
of a 20 pin connector. The single yellow wire carries
6 amps safely. So you can use a 6600 or lots of other
video cards, without overwhelming the single yellow wire
of a 20 pin PSU.

2) If you have two 6600 video cards, that would be 8 amps,
and too much for the single 6 amp (yellow) wire on the
main connector. Now you really need a 20+4 or 24 PSU.

And the funny thing is, even higher end video cards,
draw less current from that single yellow wire. A
high end card draws 2 amps. It is the mid-range cards,
that don't have a PCI Express power connector on the end
of the card, that draw 4A to 4.5A or so. Those
are the dangerous ones, with respect to the poor
yellow wire.

So the 20 pin PSU is adequate for a 24 pin
motherboard, as long as the loading on the motherboard
doesn't exceed 6 amps.

When you plug a 20 pin, into a 24 pin motherboard,
match "pin 1 with pin 1". The shapes of the pins,
help guide you to the correct insertion. Do not
try to jam together, pins not intended to mate. If
you use enough brute force, you may succeed in mating
the wrong pins. Make sure the "latch" on one side
of the connector, latches with the mate on the motherboard.
That helps you at least get the right sides lined up.

http://www.playtool.com/pages/psuconnectors/20in24.jpg

*******

The ATX12V connector comes in two flavors. The
2x2 was the first ATX12V. Some manufacturers insist
on using 2x4 connectors. When the motherboard has
a 2x4 connector, you can plug a 2x2 into it. If the
motherboard is new, a sticker covers the four
unused pins. That makes it easy to plug it in
right. Like the other connector, mate the latches.
The latch is there, to prevent thermal expansion
from "ejecting" the connector. If the connector
starts to eject itself, the pins get burned.

On the power supply end, a power supply with a
2x4, can detach. It can make two 2x2 connectors.
The connectors in that case have two yellow wires
and two black wires. If it has the two yellow wires,
you know you've got the correct one for the
motherboard ATX12V input. Do not use the four pin
section from the main connector, in the hole for
ATX12V. Doing so, will short together a few different
PSU outputs, and make a bloody mess (burned stuff).

The reason for the 2x4 connector, is for processors
drawing more than 130W or so. For example, if you
were working with LGA775 motherboard, bought a D 805
processor, overclocked to 4GHz, that draws 200W.
Now you need a 2x4 power supply, and a rating on
that power supply, for the number of amps on the
12V rail. For most users, they're not doing something
quite that extreme. And in that situation, the 2x4
connector is seldom needed to be completely filled.
A 2x2 covers most reasonable situations. And then
that sticker covering the other pins, can stay there.

Reading the Playtool site, should help fill in anything
I missed, with a few different words.

HTH,
Paul
  #3  
Old December 14th 13, 01:32 AM posted to alt.comp.periphs.mainboard.gigabyte
Jack
external usenet poster
 
Posts: 18
Default Power Supply Connector

On 12/12/2013 7:52 PM, Paul wrote:
Hidden wrote:
When buying a power supply for a motherboard do you have to check
which connector type it has for the motherboard before purchase. I see
that some motherboard require different plug types and wasn't sure if
they come with different connectors.


(Desktop) Boards have two power connectors.

(Server motherboards have a great many power connectors,
and are a bit confusing. Desktops are easy.)

The most modern power supply, has a 20+4 connector. Typically,
the PSU connector detaches into two pieces. The four pin piece
is of no use by itself. The four pin piece has four
different colored wires. The two portions are wrapped together
so they can't get separated. The four pin section was added,
to make room for more amperes of current. The four pin section
does not add any new or different voltages. It is for this
reason, that the four pin section doesn't always need to be
connected. If the application doesn't need more amperes
of current, it doesn't have to be plugged in.

This site has pictures. Simply copy a link to a picture
here, if you have a question.

http://www.playtool.com/pages/psucon...onnectors.html

You can plug a 20 into a 24. You can plug a 24 into a 20.
If the 24 does not detach, the four pin section could
"hang over the end". More frequently, the 24 is a 20+4
and it detaches to handle either kind of motherboard.
A 20+4 can handle a 20 or a 24 motherboard.

You can plug an old 20 pin PSU into a 24 pin motherboard, if:

1) You're using one PCI Express video card only.
A 6600 video card draws 4 amps from +12V on the main connector.
Other cards draw less current on the single yellow wire
of a 20 pin connector. The single yellow wire carries
6 amps safely. So you can use a 6600 or lots of other
video cards, without overwhelming the single yellow wire
of a 20 pin PSU.

2) If you have two 6600 video cards, that would be 8 amps,
and too much for the single 6 amp (yellow) wire on the
main connector. Now you really need a 20+4 or 24 PSU.

And the funny thing is, even higher end video cards,
draw less current from that single yellow wire. A
high end card draws 2 amps. It is the mid-range cards,
that don't have a PCI Express power connector on the end
of the card, that draw 4A to 4.5A or so. Those
are the dangerous ones, with respect to the poor
yellow wire.

So the 20 pin PSU is adequate for a 24 pin
motherboard, as long as the loading on the motherboard
doesn't exceed 6 amps.

When you plug a 20 pin, into a 24 pin motherboard,
match "pin 1 with pin 1". The shapes of the pins,
help guide you to the correct insertion. Do not
try to jam together, pins not intended to mate. If
you use enough brute force, you may succeed in mating
the wrong pins. Make sure the "latch" on one side
of the connector, latches with the mate on the motherboard.
That helps you at least get the right sides lined up.

http://www.playtool.com/pages/psuconnectors/20in24.jpg

*******

The ATX12V connector comes in two flavors. The
2x2 was the first ATX12V. Some manufacturers insist
on using 2x4 connectors. When the motherboard has
a 2x4 connector, you can plug a 2x2 into it. If the
motherboard is new, a sticker covers the four
unused pins. That makes it easy to plug it in
right. Like the other connector, mate the latches.
The latch is there, to prevent thermal expansion
from "ejecting" the connector. If the connector
starts to eject itself, the pins get burned.

On the power supply end, a power supply with a
2x4, can detach. It can make two 2x2 connectors.
The connectors in that case have two yellow wires
and two black wires. If it has the two yellow wires,
you know you've got the correct one for the
motherboard ATX12V input. Do not use the four pin
section from the main connector, in the hole for
ATX12V. Doing so, will short together a few different
PSU outputs, and make a bloody mess (burned stuff).

The reason for the 2x4 connector, is for processors
drawing more than 130W or so. For example, if you
were working with LGA775 motherboard, bought a D 805
processor, overclocked to 4GHz, that draws 200W.
Now you need a 2x4 power supply, and a rating on
that power supply, for the number of amps on the
12V rail. For most users, they're not doing something
quite that extreme. And in that situation, the 2x4
connector is seldom needed to be completely filled.
A 2x2 covers most reasonable situations. And then
that sticker covering the other pins, can stay there.

Reading the Playtool site, should help fill in anything
I missed, with a few different words.

HTH,
Paul


Paul thanks for the detailed response.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Does this Power Supply have 24-pin connector? Theodore Baldwin Boothe III Homebuilt PC's 17 February 28th 06 01:33 AM
Old M/B and new Power Supply problems with 12V power connector [email protected] Gateway Computers 2 October 10th 05 08:28 PM
PSU missing 12v 4-pin connector 4 CPU power supply TJ Sackville-West General 9 December 20th 04 02:58 AM
Different power supply connector on motherboard? David General 6 September 16th 04 08:30 PM
connecting 24 pin power supply to atx 20 pin connector ___BLaST___ Homebuilt PC's 0 June 29th 03 04:50 AM


All times are GMT +1. The time now is 04:35 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.