If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
JIUCB 1700+ Core Voltage Maximum Limit?
Hi,
Just got a 1700+ (AXDA1700DUT3C 9267626270859 JIUCB0251RPMW) T'Bred "B" processor and I'm in the process of overclocking it. The specs are as follows: ASUS A7N8X-Deluxe BIOS: Uber 1007 2 x 256 Corsair PC3200 RAM Coolermaster Aero7+ Cooler I've had to push the Vcore (default 1.600) up quite considerably already just to get it running at 166x12.5 for 2083MHz, it is currently running at 1.750, with core temp at around 30c under full Prime95 load. If I increase the FSB above 166MHz, Prime95 fails. Am I safe to increase the VCore about 1.750? I always worked on a 10% margin above stock. I already have a machine identical specs, although the CPU is an 1800+ JIUHB that I have running at 180x12.5 for 2250MHz Thanks in advance |
#2
|
|||
|
|||
space--coyote wrote:
Hi, Just got a 1700+ (AXDA1700DUT3C 9267626270859 JIUCB0251RPMW) T'Bred "B" processor and I'm in the process of overclocking it. The specs are as follows: ASUS A7N8X-Deluxe BIOS: Uber 1007 2 x 256 Corsair PC3200 RAM Coolermaster Aero7+ Cooler I've had to push the Vcore (default 1.600) up quite considerably already just to get it running at 166x12.5 for 2083MHz, it is currently running at 1.750, with core temp at around 30c under full Prime95 load. If I increase the FSB above 166MHz, Prime95 fails. Am I safe to increase the VCore about 1.750? I always worked on a 10% margin above stock. I already have a machine identical specs, although the CPU is an 1800+ JIUHB that I have running at 180x12.5 for 2250MHz Thanks in advance That may be all that CPU can do. If you want a faster FSB for better bandwidth, lower the multiplier, then raise the FSB. Keep the speed at around 2000 MHz. Once you get the FSB up to whatever you want, then try pushing the multiplier up. With good cooling, I've seen people run with 1.85v Vcore. |
#3
|
|||
|
|||
2.06V here, air cooled no problem
-- *****Replace 'NOSPAM' with 'btinternet' in the reply address***** "space--coyote" wrote in message ... Hi, Just got a 1700+ (AXDA1700DUT3C 9267626270859 JIUCB0251RPMW) T'Bred "B" processor and I'm in the process of overclocking it. The specs are as follows: ASUS A7N8X-Deluxe BIOS: Uber 1007 2 x 256 Corsair PC3200 RAM Coolermaster Aero7+ Cooler I've had to push the Vcore (default 1.600) up quite considerably already just to get it running at 166x12.5 for 2083MHz, it is currently running at 1.750, with core temp at around 30c under full Prime95 load. If I increase the FSB above 166MHz, Prime95 fails. Am I safe to increase the VCore about 1.750? I always worked on a 10% margin above stock. I already have a machine identical specs, although the CPU is an 1800+ JIUHB that I have running at 180x12.5 for 2250MHz Thanks in advance |
#4
|
|||
|
|||
70 idle temp??? its possible but a little straining dont u think?
"BigBadger" wrote in message ... 2.06V here, air cooled no problem -- *****Replace 'NOSPAM' with 'btinternet' in the reply address***** "space--coyote" wrote in message ... Hi, Just got a 1700+ (AXDA1700DUT3C 9267626270859 JIUCB0251RPMW) T'Bred "B" processor and I'm in the process of overclocking it. The specs are as follows: ASUS A7N8X-Deluxe BIOS: Uber 1007 2 x 256 Corsair PC3200 RAM Coolermaster Aero7+ Cooler I've had to push the Vcore (default 1.600) up quite considerably already just to get it running at 166x12.5 for 2083MHz, it is currently running at 1.750, with core temp at around 30c under full Prime95 load. If I increase the FSB above 166MHz, Prime95 fails. Am I safe to increase the VCore about 1.750? I always worked on a 10% margin above stock. I already have a machine identical specs, although the CPU is an 1800+ JIUHB that I have running at 180x12.5 for 2250MHz Thanks in advance |
#5
|
|||
|
|||
2.06V here, air cooled no problem
Ya, 1.9v here, running at 2.3ghz. The voltage is pretty much irrelevant, what really matters is the temperatures. Remember that the Northbridge has to handle all this data going through it also, so raise the Vchipset to the max setting. rms |
#6
|
|||
|
|||
Run mine at 2.03 vcore, for 215 x 11
"space--coyote" wrote in message ... Hi, Just got a 1700+ (AXDA1700DUT3C 9267626270859 JIUCB0251RPMW) T'Bred "B" processor and I'm in the process of overclocking it. The specs are as follows: ASUS A7N8X-Deluxe BIOS: Uber 1007 2 x 256 Corsair PC3200 RAM Coolermaster Aero7+ Cooler I've had to push the Vcore (default 1.600) up quite considerably already just to get it running at 166x12.5 for 2083MHz, it is currently running at 1.750, with core temp at around 30c under full Prime95 load. If I increase the FSB above 166MHz, Prime95 fails. Am I safe to increase the VCore about 1.750? I always worked on a 10% margin above stock. I already have a machine identical specs, although the CPU is an 1800+ JIUHB that I have running at 180x12.5 for 2250MHz Thanks in advance |
#7
|
|||
|
|||
"Top-poster" wrote in message ... Run mine at 2.03 vcore, for 215 x 11 "space--coyote" wrote in message ... Hi, Just got a 1700+ (AXDA1700DUT3C 9267626270859 JIUCB0251RPMW) T'Bred "B" processor and I'm in the process of overclocking it. The specs are as follows: ASUS A7N8X-Deluxe BIOS: Uber 1007 2 x 256 Corsair PC3200 RAM Coolermaster Aero7+ Cooler I've had to push the Vcore (default 1.600) up quite considerably already just to get it running at 166x12.5 for 2083MHz, it is currently running at 1.750, with core temp at around 30c under full Prime95 load. If I increase the FSB above 166MHz, Prime95 fails. Am I safe to increase the VCore about 1.750? I always worked on a 10% margin above stock. I already have a machine identical specs, although the CPU is an 1800+ JIUHB that I have running at 180x12.5 for 2250MHz Thanks in advance I have the same setup, with the 2700LL RAM and I can't go above 168, but @ 168 I can run Prime95 for 13 hours. I wonder if were to goto higer voltage, could I get higher FSB w/ lower multiplier? -- A7N8X Deluxe Rev 2.0 | 1007 Über | 1700+ @12 x 168 = 2.02Ghz @1.7v | CorsairTwinX XMS 2700LL (2x256) 6-2-2-2 @2.7v | MSI GeForce4Ti4200 128MB @280/584 | 3DMark=10,658 | CoolerMaster Aero7+ | Microcool Northpole | HS on SB | Diode = 28/34°C | Socket = 35/39°C | Vantec Ion 400W |
#8
|
|||
|
|||
Mid 30's deg C at idle and mid to high 40's at full load (depending on how
high I have my Delta 120mm turned up)......Not bad temps even for a stock system let alone one running at 2.5GHs/2.06V. The heatsinks a SLK900U -- *****Replace 'NOSPAM' with 'btinternet' in the reply address***** "Matt" wrote in message ... 70 idle temp??? its possible but a little straining dont u think? "BigBadger" wrote in message ... 2.06V here, air cooled no problem -- *****Replace 'NOSPAM' with 'btinternet' in the reply address***** "space--coyote" wrote in message ... Hi, Just got a 1700+ (AXDA1700DUT3C 9267626270859 JIUCB0251RPMW) T'Bred "B" processor and I'm in the process of overclocking it. The specs are as follows: ASUS A7N8X-Deluxe BIOS: Uber 1007 2 x 256 Corsair PC3200 RAM Coolermaster Aero7+ Cooler I've had to push the Vcore (default 1.600) up quite considerably already just to get it running at 166x12.5 for 2083MHz, it is currently running at 1.750, with core temp at around 30c under full Prime95 load. If I increase the FSB above 166MHz, Prime95 fails. Am I safe to increase the VCore about 1.750? I always worked on a 10% margin above stock. I already have a machine identical specs, although the CPU is an 1800+ JIUHB that I have running at 180x12.5 for 2250MHz Thanks in advance |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Celeron core voltage | dj | Overclocking | 3 | January 21st 05 03:51 PM |
Upping core voltage on 9800 Pro/XT | Neil | Overclocking | 13 | August 1st 04 07:31 PM |
ABIT AI7 (Springdale) - NB/AGP Core Voltage? | Wayne Youngman | Overclocking | 7 | April 24th 04 03:44 PM |
Maximum safe voltage for CPU | Jimmy L | Overclocking | 13 | January 18th 04 12:26 PM |
Xp2000+ core voltage? | Jerry McBride | Overclocking AMD Processors | 3 | July 21st 03 06:50 AM |