Next A64 price slash?

Does anyone have any thoughts on when the next AMD price slash will be? I'm
looking at getting a 3500+, as I want S939 for my next setup, but it is
still just an eensy bit too much!!

Cheers

--

JW

Spell Yahoo correctly to reply!

The new 939 4000 and FX 55 is suppose to be out next month, so there should be
a price drop on the older 64's. I'm waitng to too for the 3500 to drop. DOUG

"Courseyauto" wrote in message
...
The new 939 4000 and FX 55 is suppose to be out next month, so there
should be
a price drop on the older 64's. I'm waitng to too for the 3500 to drop.
DOUG

Sounds good. Fingers crossed!!

Cheers

John

I see where they are coming out with two lower speed 939 cpu's,an 3000 and a
3200 i believe it was . Also they are releasing the new 90nm 939 Cpu's, which
will have better memory controller. DOUG

"Courseyauto" wrote in message
...
I see where they are coming out with two lower speed 939 cpu's,an 3000 and
a
3200 i believe it was . Also they are releasing the new 90nm 939 Cpu's,
which
will have better memory controller. DOUG

Where did you find all this info?

Thanks

John

"Courseyauto" wrote in message
...
I see where they are coming out with two lower speed 939 cpu's,an 3000 and
a
3200 i believe it was . Also they are releasing the new 90nm 939 Cpu's,
which
will have better memory controller. DOUG

Where did you find all this info?

Thanks

John
--------------------------------------------------------------------------
------------------
From the AMD web site.
http://www.amd.com/us-en/Processors/..._118_9485_9487
%5E10248,00.html

"Courseyauto" wrote in message
...

From the AMD web site.
http://www.amd.com/us-en/Processors/..._118_9485_9487
%5E10248,00.html

Thanks.

John

"Courseyauto" wrote in message
...

From the AMD web site.
http://www.amd.com/us-en/Processors/..._118_9485_9487
%5E10248,00.html

Thanks.

John
--------------------------------------------------------------------------
-----------------------------------
If the link doesn't work go to www.hardocp.com. Theres some info there on the
new 929's.

It seems true that next price-cut is not very far. I am wondering
which AMD64 CPU to go. 754 or 939? the later would be the future,
but currently there aren't montherboard to select from.


"
CHIP FIRM AMD will cut prices on Athlon 64s on the 15th of October,
according to sources.

The prices below are channel prices, and for boxed processors. No
price cuts are expected on AMD's family of Opteron processors, from
the 140 right up to the 850.

As far as we are aware, Intel has no plans to cut prices on its
desktop CPUs in the near future. But, as always, things can change.
"
http://www.theinquirer.net/?article=18887

John

(Courseyauto) wrote in message ...
"Courseyauto" wrote in message
...

From the AMD web site.
http://www.amd.com/us-en/Processors/..._118_9485_9487
%5E10248,00.html

Thanks.

John
--------------------------------------------------------------------------
-----------------------------------
If the link doesn't work go to www.hardocp.com. Theres some info there on the
new 929's.

It seems true that next price-cut is not very far. I am wondering
which AMD64 CPU to go. 754 or 939? the later would be the future,
but currently there aren't montherboard to select from.


"
CHIP FIRM AMD will cut prices on Athlon 64s on the 15th of October,
according to sources.

The prices below are channel prices, and for boxed processors. No
price cuts are expected on AMD's family of Opteron processors, from
the 140 right up to the 850.

As far as we are aware, Intel has no plans to cut prices on its
desktop CPUs in the near future. But, as always, things can change.
"
--------------------------------------------------------------------------
----------------
I just got my 90nm 3500 from Monarch for $309 without the HS and Fan. i put a
Gigabyte rocket cooler on it which is much better than the stock cooler. I
have the Gigabyte K8NSNXP 939 motherboard. So far it doesn't like Corsair XMS
3500 ram in Dual mode wont boot. it will boot with one stick,i have 2 Kingston
HYPER X 3500 that i am going to try tonight. I have the F3 bios that shows 12
degrees C so i have to flash to the F4 before it will read right. Monarch
seemed to have the best prices on the Athlon 64's. i ordered it Mon and got it
today. DOUG