1.4GHz PIII-S Tualatins on a VP6!! HELP!!!

On Tue, 06 Jul 2004 13:39:50 GMT, "Homie" wrote:

I have tested several VP6's with 3 different brands of "Tulatin" adapters.....
So far the results have been the same.......BAD
The VP6 runs better with coppermine based CPU's

Yes, IMHo is better to get a genuine 2Cpu Tuallie MoBo (maybe some
Supermicro one somewhere) than to loose time trying to make it work
with VP6

Maybe also to lay hands on a used Epox ep-d3va board (2x s.370, Via
chipset) & try with his existing adapters his 2 Tuallies if they work
properly on that MoBo.

the next option would be getting from eBay some duallie Asus P2B MoBo
(BX chipset Slot1) & 2 slotkets (MSI v.2xx & mod them for Tuallies) or
get 2 Slot-T slotkets & follow the mod on them on the P2B´s site :
http://tipperlinne.com/p2bmod

Btw, P2B was time ago selling one of his modded boards for 2 Tuallies
--
Regards, SPAJKY ®
& visit my site @ http://www.spajky.vze.com
"Tualatin OC-ed / BX-Slot1 / inaudible setup!"
E-mail AntiSpam: remove ##

Spajky wrote:

On Tue, 06 Jul 2004 13:39:50 GMT, "Homie" wrote:


I have tested several VP6's with 3 different brands of "Tulatin" adapters.....
So far the results have been the same.......BAD
The VP6 runs better with coppermine based CPU's


Yes, IMHo is better to get a genuine 2Cpu Tuallie MoBo (maybe some
Supermicro one somewhere) than to loose time trying to make it work
with VP6

Maybe also to lay hands on a used Epox ep-d3va board (2x s.370, Via
chipset) & try with his existing adapters his 2 Tuallies if they work
properly on that MoBo.

the next option would be getting from eBay some duallie Asus P2B MoBo
(BX chipset Slot1) & 2 slotkets (MSI v.2xx & mod them for Tuallies) or
get 2 Slot-T slotkets & follow the mod on them on the P2B´s site :
http://tipperlinne.com/p2bmod

Btw, P2B was time ago selling one of his modded boards for 2 Tuallies

The P2B modification business is pretty slow these days, but my services
remain available and advice is free as always :-)

P2B