A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Acer Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Acer Aspire 5000 laptop DVD drive does not burn DVDs correctly - Unspecified Recorder Error



 
 
Thread Tools Display Modes
  #1  
Old March 15th 07, 09:30 PM posted to alt.comp.hardware,alt.comp.periphs.cdr,alt.sys.pc-clone.acer
Sid B
external usenet poster
 
Posts: 6
Default Acer Aspire 5000 laptop DVD drive does not burn DVDs correctly - Unspecified Recorder Error


Hi,

I've been using an Acer Aspire 5000 notebook for about a year. During
that while I have only occasionally used the DVD drive for writing
DVDs. Just recently, I tried again and it failed twice in the middle
of a burn.

I am using Windows XPSP2 and Nero 7.

The log file that Nero generates is copied below.

I think the actual model number for the drive is: MAT****A UJ-840D

Any help on fixing this problem would be most appreciated!

Thanks,
Sid

Some other possibly relevant discussions:
http://forumz.tomshardware.com/hardw...ict200977.html
------------------------------------------------------------------------------------------------------------------------------


XYZ ABC
ABC
1C80-0010-8001-0000-2468-1873-4466

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'F:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74,
size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
(Nero Express)
Recorder: MAT****A UJ-840D Version: 1.03 - HA 1
TA 0 - 7.2.0.3
Adapter driver: IDE HA 1
Drive buffer : 2048kB
Bus Type : default (0) - ATAPI, detected: ?
CD-ROM: MAT****A UJ-840D Version: 1.03 - HA 1
TA 0 - 7.2.0.3
Adapter driver: IDE HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0
ID 0 DMA: On
CdRomPeripheral : MAT****A UJ-840D atapi Port 1
ID 0 DMA: On

=== CDRom-Device-Map ===
MAT****A UJ-840D E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 958MB (981488kB)
Free physical memory: 379MB (388652kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.3.2007
ISO compilation
10:18:15 PM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:18:15 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

10:18:15 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

10:18:15 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: MAT****A UJ-840D running

10:18:15 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:18:15 PM #6 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

10:18:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2293743 (509:43.18, 4479MB)
... change CloseDisc-Flag to 1 as capacity is exhaused

10:18:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

10:18:15 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: MAT****A UJ-840D, Media type: DVD-R
Disc Manufacturer: MBI 01 - RG40
Disc Application Code: 64, Disc Physical Code: 193

10:18:15 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
Protocol of DlgWaitCD activities:
=========================================

10:18:15 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2293744 (2293744) = #2293744/509:43.19
relocatable, disc pos for caching/writing not required/ required,
no patch infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2293744 blocks [E: MAT****A UJ-840D]
--------------------------------------------------------------

10:18:15 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: MAT****A UJ-840D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0
0 4697587712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2293744 | lead-out | 1 | 0x41 | 0x00

10:18:15 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:18:15 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:18:15 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

10:18:15 PM #16 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.

10:18:15 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

10:18:15 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2x (2,770 KB/s)

10:18:15 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #0

10:18:15 PM #20 Text 0 File DVDR.cpp, Line 2786
Recording mode: Sequential Recording Mode

10:18:16 PM #21 Text 0 File DVDR.cpp, Line 2942
Start write address at LBA 0
DVD high compatibility mode: Yes

10:18:16 PM #22 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structu Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version:
2.1 (33)
Disc Size: 120 mm, Maximum Rate: not specified (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP),
Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-
R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h,
4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...
0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00
00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00
00 ................

10:32:18 PM #23 SPTI -1 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 00 00 10 84 20 00 00 20 00 00 00
Sense Area: 0xF1 00 04 00 10 81 10 0A 00 3C 00 00 03 01
Buffer x0a720000: Len x10000
0x3B D5 4C 1B 2E 55 FB 44 7C E8 C1 5A 8E 07 64 6C
0x9F B3 A5 1A 65 E1 16 19 B8 99 D0 99 8C E3 3B 60
0x90 4F 0C 6B C9 A2 E1 70 4E 92 48 17 49 B9 87 01

10:32:18 PM #24 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
E: MAT****A UJ-840D

10:32:18 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:32:18 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:32:18 PM #27 Text 0 File DVDR.cpp, Line 3182
EndDAO: Last written address was 1082399

10:32:19 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created
2/23/2007 9:59:52 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
\AllocateCDROMs : 0 (Security Option)

  #2  
Old March 15th 07, 10:12 PM posted to alt.comp.hardware,alt.comp.periphs.cdr,alt.sys.pc-clone.acer
Gerard Bok
external usenet poster
 
Posts: 177
Default Acer Aspire 5000 laptop DVD drive does not burn DVDs correctly - Unspecified Recorder Error

On 15 Mar 2007 13:30:36 -0700, "Sid B"
wrote:

I've been using an Acer Aspire 5000 notebook for about a year. During
that while I have only occasionally used the DVD drive for writing
DVDs. Just recently, I tried again and it failed twice in the middle
of a burn.

I am using Windows XPSP2 and Nero 7.


I have seen Nero crashing like this before.

My suggestion would be: install a (free) burning package, like
from http://cdburnerxp.se/ and see if that shows the same
results.
It will let you distinguish a hardware from a software problem.

--
Kind regards,
Gerard Bok
  #3  
Old March 16th 07, 07:45 PM posted to alt.comp.hardware,alt.comp.periphs.cdr,alt.sys.pc-clone.acer
Sid B
external usenet poster
 
Posts: 6
Default Acer Aspire 5000 laptop DVD drive does not burn DVDs correctly - Unspecified Recorder Error


Hello Gerald,

Tried using CD Burner XP (btw - thanks for pointing it out!), and
here's the thing! It says that it "failed", but it didnt!! Isn't that
wierd!

I did a 1X write with "Test Write (Invalid for DVD Formats)" enabled.
[my drive is a 2X I think]. The test went off fine, but the write
failed right in the beginning (unlike Nero)... Later on, I just
happened to pop the DVD back in and it recognized the disk!

Anyhow, the error was as follows:

"Writing Error: (3) Error reserving DVD-R track/Session blocks.
Unknown error - use extended data for more information (1051). Error
Sense Data: SENSE KEY: 5 ASC: 30 ASCQ: 5"

Strange... but true!

Thanks again,
Sid

On Mar 16, 2:12 am, (Gerard Bok) wrote:
On 15 Mar 2007 13:30:36 -0700, "Sid B"
wrote:

I've been using anAcerAspire 5000 notebook for about a year. During
that while I have only occasionally used theDVDdrivefor writing
DVDs. Just recently, I tried again and it failed twice in the middle
of a burn.


I am using Windows XPSP2 and Nero 7.


I have seen Nero crashing like this before.

My suggestion would be: install a (free) burning package, like
from http://cdburnerxp.se/ and see if that shows the same
results.
It will let you distinguish a hardware from a software problem.

--
Kind regards,
Gerard Bok



  #4  
Old March 17th 07, 12:18 AM posted to alt.comp.hardware,alt.comp.periphs.cdr,alt.sys.pc-clone.acer
doS
external usenet poster
 
Posts: 26
Default Acer Aspire 5000 laptop DVD drive does not burn DVDs correctly - Unspecified Recorder Error

yes, get an NEC form www.newegg.com

"Sid B" wrote in message
ups.com...

Hi,

I've been using an Acer Aspire 5000 notebook for about a year. During
that while I have only occasionally used the DVD drive for writing
DVDs. Just recently, I tried again and it failed twice in the middle
of a burn.

I am using Windows XPSP2 and Nero 7.

The log file that Nero generates is copied below.

I think the actual model number for the drive is: MAT****A UJ-840D

Any help on fixing this problem would be most appreciated!

Thanks,
Sid

Some other possibly relevant discussions:
http://forumz.tomshardware.com/hardw...ict200977.html
------------------------------------------------------------------------------------------------------------------------------


XYZ ABC
ABC
1C80-0010-8001-0000-2468-1873-4466

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'F:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74,
size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
(Nero Express)
Recorder: MAT****A UJ-840D Version: 1.03 - HA 1
TA 0 - 7.2.0.3
Adapter driver: IDE HA 1
Drive buffer : 2048kB
Bus Type : default (0) - ATAPI, detected: ?
CD-ROM: MAT****A UJ-840D Version: 1.03 - HA 1
TA 0 - 7.2.0.3
Adapter driver: IDE HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST9100822A atapi Port 0
ID 0 DMA: On
CdRomPeripheral : MAT****A UJ-840D atapi Port 1
ID 0 DMA: On

=== CDRom-Device-Map ===
MAT****A UJ-840D E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 958MB (981488kB)
Free physical memory: 379MB (388652kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.3.2007
ISO compilation
10:18:15 PM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:18:15 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

10:18:15 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

10:18:15 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: MAT****A UJ-840D running

10:18:15 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:18:15 PM #6 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

10:18:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2293743 (509:43.18, 4479MB)
... change CloseDisc-Flag to 1 as capacity is exhaused

10:18:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

10:18:15 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: MAT****A UJ-840D, Media type: DVD-R
Disc Manufacturer: MBI 01 - RG40
Disc Application Code: 64, Disc Physical Code: 193

10:18:15 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
Protocol of DlgWaitCD activities:

=========================================

10:18:15 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2293744 (2293744) = #2293744/509:43.19
relocatable, disc pos for caching/writing not required/ required,
no patch infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2293744 blocks [E: MAT****A UJ-840D]
--------------------------------------------------------------

10:18:15 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: MAT****A UJ-840D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0
0 4697587712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2293744 | lead-out | 1 | 0x41 | 0x00

10:18:15 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:18:15 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:18:15 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

10:18:15 PM #16 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.

10:18:15 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

10:18:15 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2x (2,770 KB/s)

10:18:15 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #0

10:18:15 PM #20 Text 0 File DVDR.cpp, Line 2786
Recording mode: Sequential Recording Mode

10:18:16 PM #21 Text 0 File DVDR.cpp, Line 2942
Start write address at LBA 0
DVD high compatibility mode: Yes

10:18:16 PM #22 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structu Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version:
2.1 (33)
Disc Size: 120 mm, Maximum Rate: not specified (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP),
Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-
R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h,
4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...
0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00
00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00
00 ................

10:32:18 PM #23 SPTI -1 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 00 00 10 84 20 00 00 20 00 00 00
Sense Area: 0xF1 00 04 00 10 81 10 0A 00 3C 00 00 03 01
Buffer x0a720000: Len x10000
0x3B D5 4C 1B 2E 55 FB 44 7C E8 C1 5A 8E 07 64 6C
0x9F B3 A5 1A 65 E1 16 19 B8 99 D0 99 8C E3 3B 60
0x90 4F 0C 6B C9 A2 E1 70 4E 92 48 17 49 B9 87 01

10:32:18 PM #24 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
E: MAT****A UJ-840D

10:32:18 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:32:18 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:32:18 PM #27 Text 0 File DVDR.cpp, Line 3182
EndDAO: Last written address was 1082399

10:32:19 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created
2/23/2007 9:59:52 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
\AllocateCDROMs : 0 (Security Option)


  #5  
Old March 17th 07, 12:31 AM posted to alt.comp.hardware,alt.comp.periphs.cdr,alt.sys.pc-clone.acer
Gerard Bok
external usenet poster
 
Posts: 177
Default Acer Aspire 5000 laptop DVD drive does not burn DVDs correctly - Unspecified Recorder Error

On 16 Mar 2007 11:45:39 -0700, "Sid B"
wrote:

"Writing Error: (3) Error reserving DVD-R track/Session blocks.
Unknown error - use extended data for more information (1051). Error
Sense Data: SENSE KEY: 5 ASC: 30 ASCQ: 5"


So, your next move would be to try a different brand of DVD
media.

But MAT****A UJ-840D seams to have some reputation in the early
retirement field :-)

--
Kind regards,
Gerard Bok
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Acer Aspire 5000 overheating c-cubed Acer Computers 1 February 18th 07 11:44 PM
acer aspire 5000 dd Acer Computers 1 October 26th 06 07:33 AM
Acer Aspire 3003lc (3000/5000 series) CPU Upgrade [email protected] Acer Computers 0 September 16th 06 12:08 AM
Acer Aspire 1300 laptop - how to get in! Paul Acer Computers 3 April 27th 04 11:33 PM
Measure error rate? [Was: CD recorder burn quality issues - help] Phred Dell Computers 1 January 10th 04 10:15 PM


All times are GMT +1. The time now is 12:52 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.