If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Lots of Ink, virtually nothing visible on copy
I have a Lexmark x6100 (all in one) which has not been used in quite a
while. Tried to make a color copy and not even the black text printed. Bought new cartridges just in case, but... Tried a nozzle clean...checked the ink supply by opening the printer control software and it seems to have adequate ink. Cartridges are at least a year old, probably more. Any thoughts? -- Rex's Mom |
#2
|
|||
|
|||
Lots of Ink, virtually nothing visible on copy
The jets are dried out and blocked. Long periods of no use will block all
inkjet jets. "Rex's Mom" wrote in message ... I have a Lexmark x6100 (all in one) which has not been used in quite a while. Tried to make a color copy and not even the black text printed. Bought new cartridges just in case, but... Tried a nozzle clean...checked the ink supply by opening the printer control software and it seems to have adequate ink. Cartridges are at least a year old, probably more. Any thoughts? -- Rex's Mom |
#3
|
|||
|
|||
Lots of Ink, virtually nothing visible on copy
Woody wrote:
The jets are dried out and blocked. Long periods of no use will block all inkjet jets. that's what I feared, but was hoping to avoid new ones. What is 'average' life? Are there any 'tricks/hints' to prolong life or at least get maximum life? (like printing at least one page a month or similar?) Thanks. "Rex's Mom" wrote in message ... I have a Lexmark x6100 (all in one) which has not been used in quite a while. Tried to make a color copy and not even the black text printed. Bought new cartridges just in case, but... Tried a nozzle clean...checked the ink supply by opening the printer control software and it seems to have adequate ink. Cartridges are at least a year old, probably more. Any thoughts? -- Rex's Mom -- Rex's Mom |
#4
|
|||
|
|||
Lots of Ink, virtually nothing visible on copy
Try removing the cartridges and placing them head down on some layers of
good quality paper towel wetted with warm water, and press the heads into the paper toweling in a light pumping action. If the paper toweling gets stained with ink, move the heads to another portion which is also wet. Do this numerous times until the ink seems to be flowing well, and then try reinstalling the cartridges, giving them a cleaning cycle or two, and see if that resolves the problem. Keep in mind that the ink levels you see in the monitor software are not actually measured, but are based upon the full cartridges when you install them, and an amount is subtracted for each printing and cleaning. Th is may not be accurate if you used a refilled cartridge which may have more or less ink in it than the usual from the manufacturer, or the ink could have leaked out over time (less likely) or the water in the ink could have evaporated leaving a very thickened ink that won't properly flow. Art Woody wrote: The jets are dried out and blocked. Long periods of no use will block all inkjet jets. "Rex's Mom" wrote in message ... I have a Lexmark x6100 (all in one) which has not been used in quite a while. Tried to make a color copy and not even the black text printed. Bought new cartridges just in case, but... Tried a nozzle clean...checked the ink supply by opening the printer control software and it seems to have adequate ink. Cartridges are at least a year old, probably more. Any thoughts? -- Rex's Mom |
#5
|
|||
|
|||
Lots of Ink, virtually nothing visible on copy
I assume your printer is using the type of cartridge which have the head
incorporated into the ink cartridge, so that you get a new head when you buy a new cartridge. Most Lexmark and Dell (rebranded Lexmark with a slight change in cartridge design) printers are designed this way, as are many HP models. With this type of printer, if you know you will not be using the printer for a long period of time, you can remove the cartridges and place them in a zip-lock freezer bag, or other heavy thickness well sealed plastic bag with the air squeezed out and place the cartridge in the fridge (not the freezer). You may wish to place a small piece of sponge which is dampened with water in the bag, but not directly near the head electronics, as they may corrode over time is left too damp. If possible store the cartridge with the head down so the ink will stay in contact with the head to prevent drying and to lessen the likelihood of air pockets developing in the cartridge. Some companies used to make cartridge holders which provided a seal against the head when the cartridge was in storage outside of the printer, but I do not believe these are still being produced. Some companies place a best before date into the cartridge electronics, after which time the cartridge my no longer be acknowledged. For cartridges with included heads, this makes no sense to me, since the worse that could happen is the head would clog, which is part of the cartridge anyway, and replaceable with a new cartridge. In general cartridges can be expected to work properly for about one year to 18 months after the expiration date if unopened, and about six months to one year after opening if opened prior to the expiration date. However, types of ink and brands will differ. Some Epson cartridges with dye ink, which do not incorporate the head into the cartridge, may last 4-5 years past expiration date if kept in a cool location. Art Rex's Mom wrote: Woody wrote: The jets are dried out and blocked. Long periods of no use will block all inkjet jets. that's what I feared, but was hoping to avoid new ones. What is 'average' life? Are there any 'tricks/hints' to prolong life or at least get maximum life? (like printing at least one page a month or similar?) Thanks. "Rex's Mom" wrote in message ... I have a Lexmark x6100 (all in one) which has not been used in quite a while. Tried to make a color copy and not even the black text printed. Bought new cartridges just in case, but... Tried a nozzle clean...checked the ink supply by opening the printer control software and it seems to have adequate ink. Cartridges are at least a year old, probably more. Any thoughts? -- Rex's Mom |
#6
|
|||
|
|||
Lots of Ink, virtually nothing visible on copy
Rex's Mom wrote: Woody wrote: The jets are dried out and blocked. Long periods of no use will block all inkjet jets. that's what I feared, but was hoping to avoid new ones. What is 'average' life? Are there any 'tricks/hints' to prolong life or at least get maximum life? (like printing at least one page a month or similar?) Yes You should use OEM ink. Whatever the life it should be longer for the ink was designed for the printer as a unit. Thanks. "Rex's Mom" wrote in message ... I have a Lexmark x6100 (all in one) which has not been used in quite a while. Tried to make a color copy and not even the black text printed. Bought new cartridges just in case, but... Tried a nozzle clean...checked the ink supply by opening the printer control software and it seems to have adequate ink. Cartridges are at least a year old, probably more. Any thoughts? -- Rex's Mom |
#7
|
|||
|
|||
Lots of Ink, virtually nothing visible on copy
On Apr 1, 11:21*am, Frank wrote:
measekite wrote: Yes You should use OEM ink. *Whatever the life it should be longer for the ink was designed for the printer as a unit. That is a lie! Frank The OEM ink isn't going to dry out any slower....I once opened an HP #20 C6614DN ink cartridge brand new sealed in the HP box and foil bag and it was completely EMPTY. All the ink had evaporated out of the cartridge. You could see right through it, as this cartridge is clear with a plastic bladder inside...It was past the expiration date on the back of the box by six months. The cartridge had been stored in a customer's supply closet in a controlled environment, but it did get hot in the room at times, where it would evaporate at a faster rate. At Laser Cartridge Plus, Inc. we seal all of our refilled ink cartridges in cartridge clips and then airtight bags. If you are not going to use your printer ink for a while, you can remove the ink cartridge from the printer, and then put it back into the cartridge clip that seals off your printhead from the air, and then put it in a ziploc bag and squeeze out the excess air in the bag. To refresh a dried out cartridge, you can get some layers of paper towels and put some windex on the paper towels, and then blot the cartridge printhead onto the windex until you see ink coming out. Repeat until the ink is flowing well and then run the clean printhead cycle in your printer software a few times to get it going. You can also print a test chart to get your cartridge flowing well from the link below: http://www.lasercartridgeplus.com/ze...test-print.pdf Danita http://www.lasercartridgeplus.com |
#8
|
|||
|
|||
Lots of Ink, virtually nothing visible on copy
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Game Copy Pro - video games,copy ps2, psx, pc, and dreamcast | rachael goddard | Cdr | 0 | December 13th 06 01:18 PM |
Lots of memory problems lately - dont know if motherboard turned out to be picky or theres lots of bad mem around | [email protected] | General | 1 | April 20th 05 05:04 PM |
Nero 6 - Copy on the fly, quick copy---Can someone test this and save log file?, tryitoz | Joe Donaldson | Cdr | 0 | January 6th 04 04:36 AM |
Making all sessions visible | Howard Kaikow | Cdr | 3 | August 4th 03 10:39 PM |