If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
I have a LOT of problems with my computer
How long does this last? it has been 1 hour and 13 minutes with 31365
errors. Does amount of RAM matter, if so I have 1 GB. |
#12
|
|||
|
|||
I have a LOT of problems with my computer
How do I know if it is done? it changed what it said at the bottom to
a bunch of random numbers and _ blinking at the bottom left. 57146 errors over 1 hour and 25 minutes. Does this mean it is the RAM? hopefully it is. |
#13
|
|||
|
|||
I have a LOT of problems with my computer
"Larry Weak" wrote:
"John Doe" wrote in message My computer randomly restarted until I bought a line voltage regulator. Every once in awhile, it comes and goes, now I notice other room devices flicker off and on while my computer stays on. This sounds like a problem i was having with my house. It was found to be improper/loose ground wire/nuetral in the Power meter box. Contacting the electric company was how discovered I would like to get an upgrade but now that I've paid for a cheap line voltage regulator, I may as well get some use out of it. Having good house current is the way to go, but I think that knowing it remains that way would be fun too. I like monitoring tools. Have fun. |
#14
|
|||
|
|||
I have a LOT of problems (NOT RESOLVED)
GRRR new RAM. I can't even get to the partitions screen when
installing windows, so i do not know if RAM is the problem. I get back from disneyland and it has a new problem. it says CPU has been changed, please go into bios to reenter settings. F1 to continue. I see nothing wrong with the settings, and when putting in windows CD and booting from it, it gets stuck on Loading file... (Windows Executive) soo i buy a new motherboard. (Asus P5PL2) new problem! WEEEE... I put it in and everything and i start it up, it says "Overclocking failed or overvoltage failed. F1 to continue" so i go into BIOS to see what the problem is, and a few seconds later, BAM computer turns off. Most of the time when i turn it on, fans start but nothing happens and in like 10 seconds it turns off again. If I'm lucky I can get into BIOS. |
#15
|
|||
|
|||
I have a LOT of problems (NOT RESOLVED)
"Everlast746" wrote in message .. . GRRR new RAM. I can't even get to the partitions screen when installing windows, so i do not know if RAM is the problem. I get back from disneyland and it has a new problem. it says CPU has been changed, please go into bios to reenter settings. F1 to continue. I see nothing wrong with the settings, and when putting in windows CD and booting from it, it gets stuck on Loading file... (Windows Executive) soo i buy a new motherboard. (Asus P5PL2) new problem! WEEEE... I put it in and everything and i start it up, it says "Overclocking failed or overvoltage failed. F1 to continue" so i go into BIOS to see what the problem is, and a few seconds later, BAM computer turns off. Most of the time when i turn it on, fans start but nothing happens and in like 10 seconds it turns off again. If I'm lucky I can get into BIOS. sound PSU related under load and its failing. Also make sure of the settings identifying the CPU. |
#16
|
|||
|
|||
I have a LOT of problems (NOT RESOLVED)
i had same problem once because i put the
cpu cooler on backwards. 1/3 of thermal pad was in contact with cpu, mobo shut off system due to cpu too hot. "JAD" wrote in message ... "Everlast746" wrote in message .. . GRRR new RAM. I can't even get to the partitions screen when installing windows, so i do not know if RAM is the problem. I get back from disneyland and it has a new problem. it says CPU has been changed, please go into bios to reenter settings. F1 to continue. I see nothing wrong with the settings, and when putting in windows CD and booting from it, it gets stuck on Loading file... (Windows Executive) soo i buy a new motherboard. (Asus P5PL2) new problem! WEEEE... I put it in and everything and i start it up, it says "Overclocking failed or overvoltage failed. F1 to continue" so i go into BIOS to see what the problem is, and a few seconds later, BAM computer turns off. Most of the time when i turn it on, fans start but nothing happens and in like 10 seconds it turns off again. If I'm lucky I can get into BIOS. sound PSU related under load and its failing. Also make sure of the settings identifying the CPU. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS printers/parts trays, printheads -- oki fujitsu dl3700 dl3800 hp genicom epson ibm dec jetdirect laserjet lexmark qms okidata microline 320 ml320 393 tally printronix tektronix qms toshiba zebra otc ibm intermec 7755 boul st laurent montreal ca | cisco | Printers | 2 | May 22nd 05 02:05 AM |
Computer Problems | JosephNicol | General | 8 | October 5th 04 10:38 PM |
unusal motherboard(?) problems | heartofBruce | Homebuilt PC's | 0 | August 29th 04 12:07 AM |
Problems with computer | Paulinho | Webcams | 5 | May 8th 04 11:55 AM |
Silent Computer - Advice | David Taylor | General | 49 | October 7th 03 11:26 AM |