A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Ati Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Monitor settings



 
 
Thread Tools Display Modes
  #1  
Old April 17th 05, 08:37 PM
Jeff McNulty
external usenet poster
 
Posts: n/a
Default Monitor settings

I have a NEC FP1350x 22'' monitor connected to ATI 9800pro. I leave my
computer on for most of the day. Should I set my monitor to never shut off.
It seems like every time the monitor turns off and on it takes alot of
strain.


  #2  
Old April 17th 05, 08:55 PM
Rick
external usenet poster
 
Posts: n/a
Default

" Jeff McNulty" wrote in message news:NVy8e.7418$c93.6684@trnddc08...
I have a NEC FP1350x 22'' monitor connected to ATI 9800pro. I leave my
computer on for most of the day. Should I set my monitor to never shut off.
It seems like every time the monitor turns off and on it takes alot of strain.


How much are you using your computer during the day? If it's
most of the time, or even a substantial part of the time, disable
power saving on your monitor (and hard drives too).

The trade-off is between wear and tear caused by simple usage,
and by powering up these components -- the latter takes a toll
on CRT and LCD monitors, and hard drives.


  #3  
Old April 19th 05, 08:33 PM
Gordon Scott
external usenet poster
 
Posts: n/a
Default

Rick wrote:

" Jeff McNulty" wrote in message news:NVy8e.7418$c93.6684@trnddc08...
I have a NEC FP1350x 22'' monitor connected to ATI 9800pro. I leave my
computer on for most of the day. Should I set my monitor to never shut off.
It seems like every time the monitor turns off and on it takes alot of strain.


How much are you using your computer during the day? If it's
most of the time, or even a substantial part of the time, disable
power saving on your monitor (and hard drives too).

The trade-off is between wear and tear caused by simple usage,
and by powering up these components -- the latter takes a toll
on CRT and LCD monitors, and hard drives.


the monitor is the most power hungry portion of the computer system, it
is recommended to have it go to sleep after X minutes.
The cost is to the environment, our children and the cost of living.

Gordon
  #4  
Old April 19th 05, 09:03 PM
Rick
external usenet poster
 
Posts: n/a
Default

"Gordon Scott" wrote in message ...
Rick wrote:

" Jeff McNulty" wrote in message news:NVy8e.7418$c93.6684@trnddc08...
I have a NEC FP1350x 22'' monitor connected to ATI 9800pro. I leave my
computer on for most of the day. Should I set my monitor to never shut off.
It seems like every time the monitor turns off and on it takes alot of strain.


How much are you using your computer during the day? If it's
most of the time, or even a substantial part of the time, disable
power saving on your monitor (and hard drives too).

The trade-off is between wear and tear caused by simple usage,
and by powering up these components -- the latter takes a toll
on CRT and LCD monitors, and hard drives.


the monitor is the most power hungry portion of the computer system, it
is recommended to have it go to sleep after X minutes.
The cost is to the environment, our children and the cost of living.


Obviously it depends on how much a given system is idle,
but in general, power saving on monitors accomplishes
nothing other than to make more monitors wind up in
landfills and recycling centers faster.


  #5  
Old April 26th 05, 05:06 AM
First of One
external usenet poster
 
Posts: n/a
Default

Indeed, and CRTs contain quite a bit of hazardous materials, the major
portion of which are [thankfully] recycled... in developed countries anyway.
The environmental impact of a monitor's production and disposal may very
well outweigh the electricity consumed during its use.

And all this "power management" eliminated the hard switch - the monitor is
now sensitive to power line fluctuations even when it is turned off.

--
"War is the continuation of politics by other means.
It can therefore be said that politics is war without
bloodshed while war is politics with bloodshed."


"Rick" wrote in message
link.net...
Obviously it depends on how much a given system is idle,
but in general, power saving on monitors accomplishes
nothing other than to make more monitors wind up in
landfills and recycling centers faster.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:44 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.