A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Processors » Overclocking AMD Processors
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Athlon XP 1700+ & Soltek SL-75FRN2-L



 
 
Thread Tools Display Modes
  #1  
Old December 27th 03, 01:42 AM
external usenet poster
 
Posts: n/a
Default Athlon XP 1700+ & Soltek SL-75FRN2-L

Do you overclocking Athlon XP 1700+ on Soltek SL-75FRN2-L? What settings?
fsb, RAM etc. I have 1700@2600 12,5x166, 1,650V, cas 2 (512 pc2700 -
333mhz)... radiator and cooler to 3200xp+ (CoolerMaster) (sorry, my engish
isn't very well - i'm form poland)


  #2  
Old December 27th 03, 01:47 AM
external usenet poster
 
Posts: n/a
Default

I add another my settings:

System Performance TURBO
FSB Frequency 166MHz
CPU Interface AGGRESSIVE
Memory Frequency Auto
Resulting Frequency Auto
Memory Timings AGGRESSIVE
T(RAS) 6
T(RCD) 2
T(RP) 2
CAS Latency 2

FSB Spread Spectrum [Disabled]
AGP Spread Spectrum [Disabled]

-=| Athlon XP 1700+ & Soltek SL-75FRN2-L |=-


  #4  
Old December 27th 03, 02:40 AM
external usenet poster
 
Posts: n/a
Default

You don't have it at 2600, you have it at 2075MHz, approximately equal to
an
XP2600+


I know that ))


  #6  
Old December 27th 03, 11:59 AM
external usenet poster
 
Posts: n/a
Default

:-) When you write xyz@abc abc is usually taken to be a MHz rating.

ok, my mistake


  #7  
Old December 28th 03, 04:08 AM
Jon Danniken
external usenet poster
 
Posts: n/a
Default

"~misfit~" wrote:

I have the same mobo (good board BTW) and run my 1800+ at 200MHz FSB and a
10.5 multiplier for 2.1GHz. It needs 1.825vcore for this. It runs sweetly at
this setting.


Hey Misfit, what is the default voltage for your chip? I've got a 1700+ (A core) chip with a
default of 1.5v, and have been hesitant to push it over 1.65 volts.

Jon.

  #8  
Old December 29th 03, 01:01 AM
~misfit~
external usenet poster
 
Posts: n/a
Default

Jon Danniken wrote:
"~misfit~" wrote:

I have the same mobo (good board BTW) and run my 1800+ at 200MHz FSB
and a
10.5 multiplier for 2.1GHz. It needs 1.825vcore for this. It runs
sweetly at this setting.


Hey Misfit, what is the default voltage for your chip? I've got a
1700+ (A core) chip with a default of 1.5v, and have been hesitant to
push it over 1.65 volts.


My default is 1.65v (?). I'm not sure but I know it isn't 1.5v. With
adequate cooling there is no reason you can't push your vcore up to 1.8v or
more. I've seen XP1700'B's running over 2.0vcore but with liquid cooling or
phase-change.

You won't get as good an O/C with an A core as you would with a B core
though. I hear they stop around 1.9Ghz. Maybe someone else can confirm this?
Mine's a B core.
--
~misfit~


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pentium 4 vs. Athlon XP vs. Athlon 64's MarkW General 2 October 10th 06 12:11 PM
Soltek SL-75KAV w/ Athlon XP 2600+ 333MHz FSB (Thoroughbred) Albert Finchly General 2 March 5th 04 01:12 AM
Slowest Athlon 64 humbles fastest P4 in gaming Tone-EQ Overclocking AMD Processors 1 December 15th 03 05:09 PM
Athlon 64 Shuttle XPC reviewed; P4 hammered again! Supertimer Overclocking AMD Processors 1 October 13th 03 03:25 PM
AMD Athlon 64FX first impressions Chris General 14 September 29th 03 02:22 PM


All times are GMT +1. The time now is 07:53 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.