If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Canon iP5200 printi on CD
Hello,
I have a small but annoying problem: sometimes, printing on a CD (with CD Label Print) the CD tray is loaded by the printer for 1 cm then the movement appers to be blocked, the tary is ejected and the printer fall in alarm (2 flash of yellow led). Trying 2-3 times, then the print is ok. It seems the problem is not related with the CD or DVD manufacturer as it appears with many different ones. Any suggestion? Thanks. |
#2
|
|||
|
|||
Canon iP5200 printi on CD
Make sure all the reflective squares on the disc are clean.
"Nedo" wrote in message ... Hello, I have a small but annoying problem: sometimes, printing on a CD (with CD Label Print) the CD tray is loaded by the printer for 1 cm then the movement appers to be blocked, the tary is ejected and the printer fall in alarm (2 flash of yellow led). Trying 2-3 times, then the print is ok. It seems the problem is not related with the CD or DVD manufacturer as it appears with many different ones. Any suggestion? Thanks. |
#3
|
|||
|
|||
Canon iP5200 printi on CD
Dan G wrote:
Make sure all the reflective squares on the disc are clean. Yes, all the reflectives are clean. But now there's a new. It seems I've found the mistake; well for my english it's not so easy to explain... The inner cover is also a guide tha sustain the CD tray during the loading: if this cover is not perfectly in line with the internal rollers of the printer, then when the tray is loaded, it can be blocked by this rollers instead to be pinched. The error is in term of fraction of millimeters and that's why the problem occour rarely. The solution is: keep the inner cover lifted up by 1 or 2 mm during the loading procedure; for this small movement there's no risk to damage the printer. If this can be useful for someone else, I can prepare some pictures to describe better the situation. Bye and thanks for your attention. "Nedo" wrote in message ... Hello, I have a small but annoying problem: sometimes, printing on a CD (with CD Label Print) the CD tray is loaded by the printer for 1 cm then the movement appers to be blocked, the tary is ejected and the printer fall in alarm (2 flash of yellow led). Trying 2-3 times, then the print is ok. It seems the problem is not related with the CD or DVD manufacturer as it appears with many different ones. Any suggestion? Thanks. |
#4
|
|||
|
|||
Canon iP5200 printi on CD
Further to Dan G,
If they've fallen off.... glue a bit of kitchen cooking foil in place or similar, the size of the indents. As you push the tray in position, there should be three small ones at the back as it goes in, 2 on the right 1 on the left and a larger one towards the centre. Flipping the tray over there should be 2 large one's near the back.... as you push it in upside down that is. They reflect the light onto a sensor. Note: I use the ip5000, I can't say if the tray is exactly the same as the ip5200. Davy |
#5
|
|||
|
|||
Canon iP5200 printing on CD
Hi,
I had a similar problem but with a different brand I found a solution on this Tech Support website - This is the page for Canon IP5200 support Let me know if they helped you. Tom |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Canon iP5200 always prints 'brownish' | Howard9 | Printers | 22 | January 29th 07 08:12 PM |
Canon PIXMA iP5200 query | Gerry | Printers | 7 | January 29th 06 03:35 PM |
IP5200 and IP4200 Only Canon Ink | measekite | Printers | 13 | January 2nd 06 09:00 AM |
Canon IP5200 | Robbie Mann | Printers | 8 | December 21st 05 09:04 PM |
CANON PIXMA iP5200 | Gary | Printers | 3 | November 5th 05 07:31 PM |