New Boxen problem; any ideas?

On Thu, 12 Aug 2004 14:37:20 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:31:04 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 10:44:26 -0400, "Meat--Plow" wrote:

My Prescott draws 90 more watts when it's transcoding MPEG-2 as in shrinking
down DVD files to fit on a DVD-R wink

...um...unless you're going from DVD to SVCD the only thing that can be "transcoded" on a DVD is the
audio you ****ing nimrod. And why would you need to "shrink" a DVD to fit on a DVD-R? I mean, uh,
****ing hello, THEY'RE THE SAME SIZE! o_O

My Prescott also warms from 50 into the 60's when it's thumping. The chipset
also warms but not that much. I replaced with a Northbridge chip of the same
speed as my Prescott and it did not heat near as much nor did it draw near the
wattage. But it also took longet to process video.

That's all that box does, video. I won't clutter it with a bunch of crap it
doesn't need on it. XP can spiral down the toilet with a bunch of non-essentials
installed within it.

...wait, wait, wait...you're claiming to transcode DVDs and you're not running WinXP? And just HOW
are you doing that, praytell? Oh free cl00, there *IS* a way to do it on a Win98 machine, I'm just
checking to see if you actually know what it is or not. ^_^

10 to 1 says your video encoding experience doesn't extend any farther than the default settings in
Auto-Gordian Knot.

One thing for certain is make sure the power supply is adequate with a Prescott
CPU. 380 watts min for a 2.8 and normal perhips.

Retardo here obviously hasn't given any thought in WHAT BRAND of power supply you should buy.

Shut uSLAP

Awww, don't you wanna try and counter anything I've said? Tsch, tsch, tsch...sure is a bitch when
you trip and make yourself look stupid, huh Baby Fett? Tell us about your "transcoding" DVDs to fit
on DVD-Rs again, that was REALLY funny! You know, my only regret is not xposting my reply to
rec.video.desktop, after all, EVERYONE should be able to share in the laughter and entertainment
that is the stupidity of an obsessed adult baby like Butt-Plow!

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 14:40:18 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:32:07 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 10:45:26 -0400, "Meat--Plow" wrote:

On Wed, 11 Aug 2004 13:51:13 -0700, Onideus Mad Hatter
,wrote:

On Wed, 11 Aug 2004 16:17:29 -0400, "Meat--Plow" wrote:

On Wed, 11 Aug 2004 19:10:51 +0100, Mimic dev@null,wrote:

Mimic wrote:

Just built my new box and its running ridiculously slow. just over 2mins
to boot to the login prompt then a further 1min 20 to get to the
desktop, its a new install of xp pro. The spec is as follows, a couple
things, it has dumped after a bugcheck a couple times, last time i had
this it was due to overclocked ram. I manually set this ram to its speed
with no joy. Also, im running it off a 300w PSU [i have a 400 on the
way] atm, which I know is causing other problems [reboots when i turn on
the light tubes hehe]. But that wouldnt be the cause of this would it ?

Anyway, any ideas would be GREATLY appreciated as this is sposed to be
the hype box that is replacing my fast, stable, 4yo duron800 machine :P

P4 2.8 Prescott [1mb L2 cache, 800/HT] @ 50 deg C
512 DDR 2700 [333]
Asus Board, supporting Prescott, HT and 800fsb @ 27 deg C
256mb Geforce4 gfx card
1 Zalman Fan controller
1 multifunctional docking bay [mem cards, usb, f/wire etc]
1 DVDrom
1 DVDRW
3 Case fans
5 inline led's.
[the tubes are always turned off atm]

If you need the exact part specs just shout.

thx


sorry, and a 40GB hdd @ 5400, and a 80GB hdd @ 7200 :P

New install of XP should boot up faster than that even if you're booting from
the 4500 rpm drive. Leave the RAM to be configured by SPD. Look in the system
and application event viewer for any red X's. That 300 watt supply is right on
the edge of not being adequate because that system can draw 300 watts when the
Prescott is thumping. I know, I have one on an Intel mobo.

Cause gosh knows the CPU is gonna be clockin at full power during the boot up you ****ing MORON.

Shut up Diaper Boi, nobody wants you in this thread. You've been told this by
many.

Free cl00, Diaper Bitch, reaching critical stupid and having a lil kookplosion all over A26 does not
magically make you "many", it just makes you an idiot.


Nobody care what youSLAP

If nobody cared, why would they respond? ^_^

And uh...hrmmm...you respond more than ANYONE, obsesso.

BTW, speaking of lying, tell us all about how you're "transcoding" DVDs to fit on DVD-Rs again, that
was just a ****ing RIOT! `, D

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

Onideus Mad Hatter wrote:

On Thu, 12 Aug 2004 14:40:18 -0400, "Meat--Plow" wrote:


On Thu, 12 Aug 2004 11:32:07 -0700, Onideus Mad Hatter
,wrote:


On Thu, 12 Aug 2004 10:45:26 -0400, "Meat--Plow" wrote:


On Wed, 11 Aug 2004 13:51:13 -0700, Onideus Mad Hatter
,wrote:


On Wed, 11 Aug 2004 16:17:29 -0400, "Meat--Plow" wrote:


On Wed, 11 Aug 2004 19:10:51 +0100, Mimic dev@null,wrote:


Mimic wrote:


Just built my new box and its running ridiculously slow. just over 2mins
to boot to the login prompt then a further 1min 20 to get to the
desktop, its a new install of xp pro. The spec is as follows, a couple
things, it has dumped after a bugcheck a couple times, last time i had
this it was due to overclocked ram. I manually set this ram to its speed
with no joy. Also, im running it off a 300w PSU [i have a 400 on the
way] atm, which I know is causing other problems [reboots when i turn on
the light tubes hehe]. But that wouldnt be the cause of this would it ?

Anyway, any ideas would be GREATLY appreciated as this is sposed to be
the hype box that is replacing my fast, stable, 4yo duron800 machine :P

P4 2.8 Prescott [1mb L2 cache, 800/HT] @ 50 deg C
512 DDR 2700 [333]
Asus Board, supporting Prescott, HT and 800fsb @ 27 deg C
256mb Geforce4 gfx card
1 Zalman Fan controller
1 multifunctional docking bay [mem cards, usb, f/wire etc]
1 DVDrom
1 DVDRW
3 Case fans
5 inline led's.
[the tubes are always turned off atm]

If you need the exact part specs just shout.

thx


sorry, and a 40GB hdd @ 5400, and a 80GB hdd @ 7200 :P

New install of XP should boot up faster than that even if you're booting from
the 4500 rpm drive. Leave the RAM to be configured by SPD. Look in the system
and application event viewer for any red X's. That 300 watt supply is right on
the edge of not being adequate because that system can draw 300 watts when the
Prescott is thumping. I know, I have one on an Intel mobo.

Cause gosh knows the CPU is gonna be clockin at full power during the boot up you ****ing MORON.

Shut up Diaper Boi, nobody wants you in this thread. You've been told this by
many.

Free cl00, Diaper Bitch, reaching critical stupid and having a lil kookplosion all over A26 does not
magically make you "many", it just makes you an idiot.


Nobody care what youSLAP


If nobody cared, why would they respond? ^_^

And uh...hrmmm...you respond more than ANYONE, obsesso.

BTW, speaking of lying, tell us all about how you're "transcoding" DVDs to fit on DVD-Rs again, that
was just a ****ing RIOT! `, D

You should know that most commercial DVDs are on a dual layer DVD.
That's twice the size of a normal DVD-R...

--
-------------
- ByteCoder - ... I see stupid people
-------------

On Thu, 12 Aug 2004 15:57:14 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 12:08:31 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 14:56:21 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:39:40 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 11:14:41 +0000 (UTC), Lensman wrote:

Onideus Mad Hatter wrote :

*Hatter reels in a newr kooktard*

Dream on, monkey boy

Awww, you don't wanna play? Just look at lil Butt-Plow! Don't you wanna go all crazy and obsesso
and follow up my every post screaming for my attention? ^_^

It serves its puSLAP

Hey look at that, a visual! Thanks for being stupid and obsessed Baby Fett, it's quite
entertaining! ^_^

Poor litSLAP

Lookit him go! ROTFL...he's like my own personal little stupid-in-box, wind him up and POP goes the
retard!

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 15:58:53 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 12:11:16 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 14:37:20 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:31:04 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 10:44:26 -0400, "Meat--Plow" wrote:

My Prescott draws 90 more watts when it's transcoding MPEG-2 as in shrinking
down DVD files to fit on a DVD-R wink

...um...unless you're going from DVD to SVCD the only thing that can be "transcoded" on a DVD is the
audio you ****ing nimrod. And why would you need to "shrink" a DVD to fit on a DVD-R? I mean, uh,
****ing hello, THEY'RE THE SAME SIZE! o_O

My Prescott also warms from 50 into the 60's when it's thumping. The chipset
also warms but not that much. I replaced with a Northbridge chip of the same
speed as my Prescott and it did not heat near as much nor did it draw near the
wattage. But it also took longet to process video.

That's all that box does, video. I won't clutter it with a bunch of crap it
doesn't need on it. XP can spiral down the toilet with a bunch of non-essentials
installed within it.

...wait, wait, wait...you're claiming to transcode DVDs and you're not running WinXP? And just HOW
are you doing that, praytell? Oh free cl00, there *IS* a way to do it on a Win98 machine, I'm just
checking to see if you actually know what it is or not. ^_^

10 to 1 says your video encoding experience doesn't extend any farther than the default settings in
Auto-Gordian Knot.

One thing for certain is make sure the power supply is adequate with a Prescott
CPU. 380 watts min for a 2.8 and normal perhips.

Retardo here obviously hasn't given any thought in WHAT BRAND of power supply you should buy.

Shut uSLAP

Awww, don't you wanna try and counter anything I've said? Tsch, tsch, tsch...sure is a bitch when
you trip and make yourself look stupid, huh Baby Fett? Tell us about your "transcoding" DVDs to fit
on DVD-Rs again, that was REALLY funny! You know, my only regret is not xposting my reply to
rec.video.desktop, after all, EVERYONE should be able to share in the laughter and entertainment
that is the stupidity of an obsessed adult baby like Butt-Plow!

Poor witSLAP

Jump retard, jump!

Go retard, go retard, go!

BWAHAHAHAHA...gawd I love having obsessed lil fan girls, they're so cute!

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 21:49:26 +0200, ByteCoder wrote:

Onideus Mad Hatter wrote:

On Thu, 12 Aug 2004 14:40:18 -0400, "Meat--Plow" wrote:


On Thu, 12 Aug 2004 11:32:07 -0700, Onideus Mad Hatter
,wrote:


On Thu, 12 Aug 2004 10:45:26 -0400, "Meat--Plow" wrote:


On Wed, 11 Aug 2004 13:51:13 -0700, Onideus Mad Hatter
,wrote:


On Wed, 11 Aug 2004 16:17:29 -0400, "Meat--Plow" wrote:


On Wed, 11 Aug 2004 19:10:51 +0100, Mimic dev@null,wrote:


Mimic wrote:


Just built my new box and its running ridiculously slow. just over 2mins
to boot to the login prompt then a further 1min 20 to get to the
desktop, its a new install of xp pro. The spec is as follows, a couple
things, it has dumped after a bugcheck a couple times, last time i had
this it was due to overclocked ram. I manually set this ram to its speed
with no joy. Also, im running it off a 300w PSU [i have a 400 on the
way] atm, which I know is causing other problems [reboots when i turn on
the light tubes hehe]. But that wouldnt be the cause of this would it ?

Anyway, any ideas would be GREATLY appreciated as this is sposed to be
the hype box that is replacing my fast, stable, 4yo duron800 machine :P

P4 2.8 Prescott [1mb L2 cache, 800/HT] @ 50 deg C
512 DDR 2700 [333]
Asus Board, supporting Prescott, HT and 800fsb @ 27 deg C
256mb Geforce4 gfx card
1 Zalman Fan controller
1 multifunctional docking bay [mem cards, usb, f/wire etc]
1 DVDrom
1 DVDRW
3 Case fans
5 inline led's.
[the tubes are always turned off atm]

If you need the exact part specs just shout.

thx


sorry, and a 40GB hdd @ 5400, and a 80GB hdd @ 7200 :P

New install of XP should boot up faster than that even if you're booting from
the 4500 rpm drive. Leave the RAM to be configured by SPD. Look in the system
and application event viewer for any red X's. That 300 watt supply is right on
the edge of not being adequate because that system can draw 300 watts when the
Prescott is thumping. I know, I have one on an Intel mobo.

Cause gosh knows the CPU is gonna be clockin at full power during the boot up you ****ing MORON.

Shut up Diaper Boi, nobody wants you in this thread. You've been told this by
many.

Free cl00, Diaper Bitch, reaching critical stupid and having a lil kookplosion all over A26 does not
magically make you "many", it just makes you an idiot.


Nobody care what youSLAP


If nobody cared, why would they respond? ^_^

And uh...hrmmm...you respond more than ANYONE, obsesso.

BTW, speaking of lying, tell us all about how you're "transcoding" DVDs to fit on DVD-Rs again, that
was just a ****ing RIOT! `, D

You should know that most commercial DVDs are on a dual layer DVD.
That's twice the size of a normal DVD-R...

You should know that BenQ came out with the first dual layer DVD writer like 3 months ago, where the
**** have you been? I mean, come on, technology waits for no one, if you can't keep up take notes.

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 16:13:46 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 21:49:26 +0200, ByteCoder
,wrote:

Onideus Mad Hatter wrote:

On Thu, 12 Aug 2004 14:40:18 -0400, "Meat--Plow" wrote:


On Thu, 12 Aug 2004 11:32:07 -0700, Onideus Mad Hatter
,wrote:


On Thu, 12 Aug 2004 10:45:26 -0400, "Meat--Plow" wrote:


On Wed, 11 Aug 2004 13:51:13 -0700, Onideus Mad Hatter
,wrote:


On Wed, 11 Aug 2004 16:17:29 -0400, "Meat--Plow" wrote:


On Wed, 11 Aug 2004 19:10:51 +0100, Mimic dev@null,wrote:


Mimic wrote:


Just built my new box and its running ridiculously slow. just over 2mins
to boot to the login prompt then a further 1min 20 to get to the
desktop, its a new install of xp pro. The spec is as follows, a couple
things, it has dumped after a bugcheck a couple times, last time i had
this it was due to overclocked ram. I manually set this ram to its speed
with no joy. Also, im running it off a 300w PSU [i have a 400 on the
way] atm, which I know is causing other problems [reboots when i turn on
the light tubes hehe]. But that wouldnt be the cause of this would it ?

Anyway, any ideas would be GREATLY appreciated as this is sposed to be
the hype box that is replacing my fast, stable, 4yo duron800 machine :P

P4 2.8 Prescott [1mb L2 cache, 800/HT] @ 50 deg C
512 DDR 2700 [333]
Asus Board, supporting Prescott, HT and 800fsb @ 27 deg C
256mb Geforce4 gfx card
1 Zalman Fan controller
1 multifunctional docking bay [mem cards, usb, f/wire etc]
1 DVDrom
1 DVDRW
3 Case fans
5 inline led's.
[the tubes are always turned off atm]

If you need the exact part specs just shout.

thx


sorry, and a 40GB hdd @ 5400, and a 80GB hdd @ 7200 :P

New install of XP should boot up faster than that even if you're booting from
the 4500 rpm drive. Leave the RAM to be configured by SPD. Look in the system
and application event viewer for any red X's. That 300 watt supply is right on
the edge of not being adequate because that system can draw 300 watts when the
Prescott is thumping. I know, I have one on an Intel mobo.

Cause gosh knows the CPU is gonna be clockin at full power during the boot up you ****ing MORON.

Shut up Diaper Boi, nobody wants you in this thread. You've been told this by
many.

Free cl00, Diaper Bitch, reaching critical stupid and having a lil kookplosion all over A26 does not
magically make you "many", it just makes you an idiot.


Nobody care what youSLAP


If nobody cared, why would they respond? ^_^

And uh...hrmmm...you respond more than ANYONE, obsesso.

BTW, speaking of lying, tell us all about how you're "transcoding" DVDs to fit on DVD-Rs again, that
was just a ****ing RIOT! `, D

You should know that most commercial DVDs are on a dual layer DVD.
That's twice the size of a normal DVD-R...

Don't bother. He's having a ball dancing under my
choreography.

And besides, it's good exercise. He needs to burn that sugar
coating off his brain somehow.

Lookit him go!
http://www.backwater-productions.net...es/licking.gif

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 16:05:17 -0400, "Meat--Plow" wrote:

http://www.elby.ch/products/clone_dvd/

CloneDVD 2


* Copies the main movie, Special Features and/or the
original menu onto a DVD Recordable or onto your harddisk

* Newly revamped transcoder: Better picture quality also at
high reduction rates (footage of more than two hours)


What does a transcoder do Poor Wittle Diaper Boi ? Does it
power your SOOPER XENON BEST COMPONENTS NEVER CRASHES Xp box
? Does it play MP3? XBox Games?


Make sure you snip all of this from your reply

Boy are you just makin yourself look like a ****ing MORON, if it's still in the same format, in this
case MPEG-2, then it's transcoding you ****ing MORON. If you're going from one format to another
like MPEG-2 to an MPEG-4 based codec like Xvid, then it's REENCODING. And the very fact that you
use CloneDVD at all...man oh man, what a ****ing GOOBER. That's like going around telling people
you're the **** cause you just got ONLINE...you know, with yer ****in WebTV box... *shakes head*

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 16:40:44 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:32:24 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 15:57:14 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 12:08:31 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 14:56:21 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:39:40 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 11:14:41 +0000 (UTC), Lensman wrote:

Onideus Mad Hatter wrote :

*Hatter reels in a newr kooktard*

Dream on, monkey boy

Awww, you don't wanna play? Just look at lil Butt-Plow! Don't you wanna go all crazy and obsesso
and follow up my every post screaming for my attention? ^_^

It serves its puSLAP

Hey look at that, a visual! Thanks for being stupid and obsessed Baby Fett, it's quite
entertaining! ^_^

Poor litSLAP

Lookit him go! ROTFL...he's like my own personal little stupid-in-box, wind him up and POP goes the
retard!

Poor litSLAP

Jump retard, jump!

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 16:38:41 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:34:05 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 15:58:53 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 12:11:16 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 14:37:20 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:31:04 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 10:44:26 -0400, "Meat--Plow" wrote:

My Prescott draws 90 more watts when it's transcoding MPEG-2 as in shrinking
down DVD files to fit on a DVD-R wink

...um...unless you're going from DVD to SVCD the only thing that can be "transcoded" on a DVD is the
audio you ****ing nimrod. And why would you need to "shrink" a DVD to fit on a DVD-R? I mean, uh,
****ing hello, THEY'RE THE SAME SIZE! o_O

My Prescott also warms from 50 into the 60's when it's thumping. The chipset
also warms but not that much. I replaced with a Northbridge chip of the same
speed as my Prescott and it did not heat near as much nor did it draw near the
wattage. But it also took longet to process video.

That's all that box does, video. I won't clutter it with a bunch of crap it
doesn't need on it. XP can spiral down the toilet with a bunch of non-essentials
installed within it.

...wait, wait, wait...you're claiming to transcode DVDs and you're not running WinXP? And just HOW
are you doing that, praytell? Oh free cl00, there *IS* a way to do it on a Win98 machine, I'm just
checking to see if you actually know what it is or not. ^_^

10 to 1 says your video encoding experience doesn't extend any farther than the default settings in
Auto-Gordian Knot.

One thing for certain is make sure the power supply is adequate with a Prescott
CPU. 380 watts min for a 2.8 and normal perhips.

Retardo here obviously hasn't given any thought in WHAT BRAND of power supply you should buy.

Shut uSLAP

Awww, don't you wanna try and counter anything I've said? Tsch, tsch, tsch...sure is a bitch when
you trip and make yourself look stupid, huh Baby Fett? Tell us about your "transcoding" DVDs to fit
on DVD-Rs again, that was REALLY funny! You know, my only regret is not xposting my reply to
rec.video.desktop, after all, EVERYONE should be able to share in the laughter and entertainment
that is the stupidity of an obsessed adult baby like Butt-Plow!

Poor witSLAP

Jump retard, jump!

Go retard, go retard, go!

BWAHAHAHAHA...gawd I love having obsessed lil fan girls, they're so cute!

DaSLAP

Jump retard, jump!

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net