Req - A7N8X Deluxe Bios Help

get better ram ddr400 then l;ower your multiplier and go for 200fsb

ocz platinum el ddr400 ram is the bolloks
CPU ext freq - [200]
CPU freq mult setting - [man]
CPU freq mult - 10.5x
Sys perf - [Optimal]
CPU interface - agg
Mem freq - [100%sync]
Result freq - 200
Mem timings - userSDRAM act prechrg delay - 5
SDRAM RAS to CAS delay - 3
SDRAM RAS prechrg delay - 2
CAS latency - 2T
FSB spread spect - [Disabled]
AGP spread spectrum - [Disabled]
CPU Vcore setting - [Auto]
CPU Vcore - 1.65v may need to raise
Graph aperture - [128]
AGP freq - [Auto]
Sys bios cache - [Disabled]
Video ram cache - [Disabled]
DDR volt - [1.5v]
AGP 8x - Enabled]
AGP fast writes - [Enabled]

"cal" wrote in message
...
Any changes I can make to wring more out of current components?

A7N8X Deluxe w/1005
XP2600/333
2 x 256/2100 on 2 & 3
400w PS
XP Pro

Current settings a

CPU ext freq - [166]
CPU freq mult setting - [Auto]
CPU freq mult - 12.5x
Sys perf - [Optimal]
CPU interface - Optimal
Mem freq - [Auto]
Result freq - Auto
Mem timings - Optimal
SDRAM act prechrg delay - 6
SDRAM RAS to CAS delay - 3
SDRAM RAS prechrg delay - 3
CAS latency - 2.5T
FSB spread spect - [Disabled]
AGP spread spectrum - [Disabled]
CPU Vcore setting - [Auto]
CPU Vcore - 1.65v
Graph aperture - [64]
AGP freq - [Auto]
Sys bios cache - [Disabled]
Video ram cache - [Disabled]
DDR volt - [1.5v]
AGP 8x - Enabled]
AGP fast writes - [Enabled]

If I were to look for better RAM what would be the best choice for
current CPU that would allow for OCing ?


thanks,
thecalman