If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Building a new PC. Any comments on these parts?
It's time for a new build, and I'd like to keep costs under $400 or
$500. I've made a few selections from NewEgg, and I'll be glad to hear any comments or suggestions anyone has. I'll start off by listing what I currently have: Motherboard: MS-7093 (v1.X) M-ATX Mainboard It's a micro-ATX socket 939 with DDR1. CPU: AMD Athlon(tm) 64 Processor 3500+ @ 2200MHz RAM: 3 GBs, DDR1, dual-channel GPU: GeForce 9600 GT, PCI-E I'll rob the GPU, hard drives and optical drives from this old rig, so all I need to get is a case, motherboard, CPU, RAM, and power supply. Here's what I'm thinking about getting from NewEgg. All the choices where made while trying to balance cost vs performance, while trying to aim for as much future upgradability as possbile. Case: ENERMAX Uber Chakra ECA5001B Black Aluminum / Steel Trim w/250mm Intake/Exhaust LED Monster Fan ATX Full Tower Case w/Front I/O 1 eSATA,4 USB2.0, Audio I/O - Retail http://www.newegg.com/Product/Produc...82E16811124121 Motherboard: GIGABYTE GA-EP45C-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Retail http://www.newegg.com/Product/Produc...82E16813128364 CPU: Intel Pentium Dual-Core E6500 Wolfdale 2.93GHz 2MB L2 Cache LGA 775 65W Dual-Core Processor - Retail http://www.newegg.com/Product/Produc...82E16819116093 RAM: WINTEC AMPX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 3AXT6400C5-4096K - Retail http://www.newegg.com/Product/Produc...82E16820161183 Power Supply: OCZ StealthXStream OCZ700SXS 700W ATX12V / EPS12V SLI Ready CrossFire Ready Active PFC Power Supply - Retail http://www.newegg.com/Product/Produc...82E16817341019 I like that the motherboard can handle a large variety of CPUs, *and* the fact that it can handle 4 GBs of DDR3 as well. That should give me a few options down the road when prices drop. All of this adds up to about $530, but I'll have about $95 in mail-in rebates. If anybody can suggest better choices without driving up the price, I'd be glad to hear it. Also, I'll be using this with Linux operating systems, so I'd like to steer clear of any known driver conflicts, etc.. |
#2
|
|||
|
|||
Building a new PC. Any comments on these parts?
On Thu, 24 Sep 2009 20:41:42 +0000, ShadowTek wrote:
It's time for a new build, and I'd like to keep costs under $400 or $500. I've made a few selections from NewEgg, and I'll be glad to hear any comments or suggestions anyone has. I'll start off by listing what I currently have: Motherboard: MS-7093 (v1.X) M-ATX Mainboard It's a micro-ATX socket 939 with DDR1. CPU: AMD Athlon(tm) 64 Processor 3500+ @ 2200MHz RAM: 3 GBs, DDR1, dual-channel GPU: GeForce 9600 GT, PCI-E I'll rob the GPU, hard drives and optical drives from this old rig, so all I need to get is a case, motherboard, CPU, RAM, and power supply. Here's what I'm thinking about getting from NewEgg. All the choices where made while trying to balance cost vs performance, while trying to aim for as much future upgradability as possbile. Case: ENERMAX Uber Chakra ECA5001B Black Aluminum / Steel Trim w/250mm Intake/Exhaust LED Monster Fan ATX Full Tower Case w/Front I/O 1 eSATA,4 USB2.0, Audio I/O - Retail http://www.newegg.com/Product/Produc...82E16811124121 Motherboard: GIGABYTE GA-EP45C-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Retail http://www.newegg.com/Product/Produc...82E16813128364 CPU: Intel Pentium Dual-Core E6500 Wolfdale 2.93GHz 2MB L2 Cache LGA 775 65W Dual-Core Processor - Retail http://www.newegg.com/Product/Produc...82E16819116093 RAM: WINTEC AMPX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 3AXT6400C5-4096K - Retail http://www.newegg.com/Product/Produc...82E16820161183 Power Supply: OCZ StealthXStream OCZ700SXS 700W ATX12V / EPS12V SLI Ready CrossFire Ready Active PFC Power Supply - Retail http://www.newegg.com/Product/Produc...82E16817341019 I like that the motherboard can handle a large variety of CPUs, *and* the fact that it can handle 4 GBs of DDR3 as well. That should give me a few options down the road when prices drop. All of this adds up to about $530, but I'll have about $95 in mail-in rebates. If anybody can suggest better choices without driving up the price, I'd be glad to hear it. Also, I'll be using this with Linux operating systems, so I'd like to steer clear of any known driver conflicts, etc.. Spend a little more on the CPU and get an E8400. It has a 6M cache vs a 2M cache on the 6500. I have my E8400 overclocked to 4GHz using a Thermalright Ultra 120 heatsink (not avail from Newegg, I got it from another website). Also get DDR2 1000 RAM, it will make overclocking easier. The Gigabyte motherboard has a limited number of clock multipliers for the RAM so when you up the FSB you end up overlocking the RAM even if you set it down to the lowest RAM multiplier. If you use DDR2 1000 this won't be a problem, and the price of DDR2 1000 is barely more than DDR2 800 these days. |
#3
|
|||
|
|||
Building a new PC. Any comments on these parts?
ShadowTek wrote:
It's time for a new build, and I'd like to keep costs under $400 or $500. I've made a few selections from NewEgg, and I'll be glad to hear any comments or suggestions anyone has. I'll start off by listing what I currently have: Motherboard: MS-7093 (v1.X) M-ATX Mainboard It's a micro-ATX socket 939 with DDR1. CPU: AMD Athlon(tm) 64 Processor 3500+ @ 2200MHz RAM: 3 GBs, DDR1, dual-channel GPU: GeForce 9600 GT, PCI-E I'll rob the GPU, hard drives and optical drives from this old rig, so all I need to get is a case, motherboard, CPU, RAM, and power supply. Here's what I'm thinking about getting from NewEgg. All the choices where made while trying to balance cost vs performance, while trying to aim for as much future upgradability as possbile. Case: ENERMAX Uber Chakra ECA5001B Black Aluminum / Steel Trim w/250mm Intake/Exhaust LED Monster Fan ATX Full Tower Case w/Front I/O 1 eSATA,4 USB2.0, Audio I/O - Retail http://www.newegg.com/Product/Produc...82E16811124121 Motherboard: GIGABYTE GA-EP45C-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Retail http://www.newegg.com/Product/Produc...82E16813128364 CPU: Intel Pentium Dual-Core E6500 Wolfdale 2.93GHz 2MB L2 Cache LGA 775 65W Dual-Core Processor - Retail http://www.newegg.com/Product/Produc...82E16819116093 RAM: WINTEC AMPX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 3AXT6400C5-4096K - Retail http://www.newegg.com/Product/Produc...82E16820161183 Power Supply: OCZ StealthXStream OCZ700SXS 700W ATX12V / EPS12V SLI Ready CrossFire Ready Active PFC Power Supply - Retail http://www.newegg.com/Product/Produc...82E16817341019 I like that the motherboard can handle a large variety of CPUs, *and* the fact that it can handle 4 GBs of DDR3 as well. That should give me a few options down the road when prices drop. All of this adds up to about $530, but I'll have about $95 in mail-in rebates. If anybody can suggest better choices without driving up the price, I'd be glad to hear it. Also, I'll be using this with Linux operating systems, so I'd like to steer clear of any known driver conflicts, etc.. You're spending a good amount on a crossfire-ready power supply to power a board that only has one graphics card slot. Hopefully someone will correct me if I'm wrong, but it seems like you're buying more than you'll need. On a purely aesthetic note, I don't like the case. Obviously that's a subject point, but it drives me to recommend: http://www.newegg.com/Product/Produc...82E16811129065 You get an Antec case + Antec 430W power supply for $100. Even if I pile on a couple of high rpm sata drives, blu-ray, dvd-rw, 4 fans, 2 pci cards and 4 usb devices, outvision's power supply calculator comes up with 312W. http://www.extreme.outervision.com/ I've bought half a dozen of those cases--the last three with the power supply, and I've been very happy with the construction, appearance and ventilation. The thing has two giant (read: quiet) fans and a bottom-loaded power supply, so it's easy to exhaust the cpu that is bordered on two sides by those fans. A few warnings: 1) The case is a bit bulky so make sure you have room for it. Allow an extra inch in each dimension for imprecise specifications. 2) If your motherboard has a cpu power connector on the far left side (as looking from the connectors side,) your cable might be a bit of a stretch. That does appear to be the case with your board. 3) There are no external 3.5" bays, so if you have floppy or a floppy-sized media card reader, you'll have to work out some ugly 5.25" adapter, or go external. |
#4
|
|||
|
|||
Building a new PC. Any comments on these parts?
ShadowTek wrote:
It's time for a new build, and I'd like to keep costs under $400 or $500. I've made a few selections from NewEgg, and I'll be glad to hear any comments or suggestions anyone has. I'll start off by listing what I currently have: Motherboard: MS-7093 (v1.X) M-ATX Mainboard It's a micro-ATX socket 939 with DDR1. CPU: AMD Athlon(tm) 64 Processor 3500+ @ 2200MHz RAM: 3 GBs, DDR1, dual-channel GPU: GeForce 9600 GT, PCI-E I'll rob the GPU, hard drives and optical drives from this old rig, so all I need to get is a case, motherboard, CPU, RAM, and power supply. Here's what I'm thinking about getting from NewEgg. All the choices where made while trying to balance cost vs performance, while trying to aim for as much future upgradability as possbile. Case: ENERMAX Uber Chakra ECA5001B Black Aluminum / Steel Trim w/250mm Intake/Exhaust LED Monster Fan ATX Full Tower Case w/Front I/O 1 eSATA,4 USB2.0, Audio I/O - Retail http://www.newegg.com/Product/Produc...82E16811124121 Motherboard: GIGABYTE GA-EP45C-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Retail http://www.newegg.com/Product/Produc...82E16813128364 CPU: Intel Pentium Dual-Core E6500 Wolfdale 2.93GHz 2MB L2 Cache LGA 775 65W Dual-Core Processor - Retail http://www.newegg.com/Product/Produc...82E16819116093 RAM: WINTEC AMPX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 3AXT6400C5-4096K - Retail http://www.newegg.com/Product/Produc...82E16820161183 Power Supply: OCZ StealthXStream OCZ700SXS 700W ATX12V / EPS12V SLI Ready CrossFire Ready Active PFC Power Supply - Retail http://www.newegg.com/Product/Produc...82E16817341019 I like that the motherboard can handle a large variety of CPUs, *and* the fact that it can handle 4 GBs of DDR3 as well. That should give me a few options down the road when prices drop. All of this adds up to about $530, but I'll have about $95 in mail-in rebates. If anybody can suggest better choices without driving up the price, I'd be glad to hear it. Also, I'll be using this with Linux operating systems, so I'd like to steer clear of any known driver conflicts, etc.. You're spending a good amount on a crossfire-ready power supply to power a board that only has one graphics card slot. Hopefully someone will correct me if I'm wrong, but it seems like you're buying more than you'll need. On a purely aesthetic note, I don't like the case. Obviously that's a subject point, but it drives me to recommend: http://www.newegg.com/Product/Produc...82E16811129065 You get an Antec case + Antec 430W power supply for $100. Even if I pile on a couple of high rpm sata drives, blu-ray, dvd-rw, 4 fans, 2 pci cards and 4 usb devices, outvision's power supply calculator comes up with 312W. http://www.extreme.outervision.com/ I've bought half a dozen of those cases--the last three with the power supply, and I've been very happy with the construction, appearance and ventilation. The thing has two giant (read: quiet) fans and a bottom-loaded power supply, so it's easy to exhaust the cpu that is bordered on two sides by those fans. A few warnings: 1) The case is a bit bulky so make sure you have room for it. Allow an extra inch in each dimension for imprecise specifications. 2) If your motherboard has a cpu power connector on the far left side (as looking from the connectors side,) your cable might be a bit of a stretch. That does appear to be the case with your board. 3) There are no external 3.5" bays, so if you have floppy or a floppy-sized media card reader, you'll have to work out some ugly 5.25" adapter, or go external. |
#5
|
|||
|
|||
Building a new PC. Any comments on these parts?
ShadowTek wrote:
It's time for a new build, and I'd like to keep costs under $400 or $500. I've made a few selections from NewEgg, and I'll be glad to hear any comments or suggestions anyone has. I'll rob the GPU, hard drives and optical drives from this old rig, so all I need to get is a case, motherboard, CPU, RAM, and power supply. Here's what I'm thinking about getting from NewEgg. All the choices where made while trying to balance cost vs performance, while trying to aim for as much future upgradability as possbile. Motherboard: GIGABYTE GA-EP45C-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Retail http://www.newegg.com/Product/Produc...82E16813128364 Buying this MoBo for upgradability at this time is false economy. You're paying extra for DDR3 compatibility, but it will only run in dual-channel mode. When you decide to upgrade again, there will be another CPU with a different socket with 3-channel DDR3 capability (e.g., i7). With your recycled components and relatively low-power CPU, you could do just as well with a GA-EP43-UD3L or GA-EP45-UD3L, at considerable savings, or a GA-EP45-UD3R if you prefer the heat pipes on the chipset coolers. CPU: Intel Pentium Dual-Core E6500 Wolfdale 2.93GHz 2MB L2 Cache LGA 775 65W Dual-Core Processor - Retail http://www.newegg.com/Product/Produc...82E16819116093 Use the $$ you save on the MoBo for an E7500 or E7600. RAM: WINTEC AMPX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model 3AXT6400C5-4096K - Retail http://www.newegg.com/Product/Produc...82E16820161183 Don't choke your system with too little slow RAM! Instead of the CPU upgrade, Get 4 GB of Patriot DDR2 1066 http://www.newegg.com/Product/Produc...82E16820220426 Power Supply: OCZ StealthXStream OCZ700SXS 700W ATX12V / EPS12V SLI Ready CrossFire Ready Active PFC Power Supply - Retail http://www.newegg.com/Product/Produc...82E16817341019 A 700W PSU is overkill for the system. Unless you're going to buy a pair of high-power Crossfire or SLI video cards, you will do fine with 400-500W. Again, save $25 with the 500W version of the same PSU (or more with the 400W version) and upgrade the CPU. BUT, those OCZ PSUs don't appear to be 80+ certified, so maybe a PC Power & Cooling Silencer PPCS420X would be better for the price http://www.newegg.com/Product/Produc...82E16817703017 I like that the motherboard can handle a large variety of CPUs, and the fact that it can handle 4 GBs of DDR3 as well. That should give me a few options down the road when prices drop. Your only likely major upgrades to this system will be a quad-core CPU and a bigger video card (if you even need one). All of this adds up to about $530, but I'll have about $95 in mail-in rebates. |
#6
|
|||
|
|||
Building a new PC. Any comments on these parts?
On 2009-09-24, General Schvantzkoph wrote:
Spend a little more on the CPU and get an E8400. It has a 6M cache vs a 2M cache on the 6500. That looks nice, but it's $168, which is $75 more than the 6500. |
#7
|
|||
|
|||
Building a new PC. Any comments on these parts?
On 2009-09-24, Grinder wrote:
You're spending a good amount on a crossfire-ready power supply to power a board that only has one graphics card slot. Hopefully someone will correct me if I'm wrong, but it seems like you're buying more than you'll need. I just picked a safe range. I could probably go a little lower. I just want to have a reasonable margin of error. Even if I pile on a couple of high rpm sata drives, blu-ray, dvd-rw, 4 fans, 2 pci cards and 4 usb devices, outvision's power supply calculator comes up with 312W. http://www.extreme.outervision.com/ I got 483w when I selected %100 load and %50 capacitor aging, so I guess I could setting for a 500w PS. |
#8
|
|||
|
|||
Building a new PC. Any comments on these parts?
On Fri, 25 Sep 2009 00:42:47 +0000, ShadowTek wrote:
On 2009-09-24, General Schvantzkoph wrote: Spend a little more on the CPU and get an E8400. It has a 6M cache vs a 2M cache on the 6500. That looks nice, but it's $168, which is $75 more than the 6500. The larger cache makes a big difference on some applications, I'd get a 500W power supply instead of the 700W and spend the money on the CPU. |
#9
|
|||
|
|||
Building a new PC. Any comments on these parts?
On 2009-09-24, JR Weiss wrote:
With your recycled components and relatively low-power CPU, you could do just as well with a GA-EP43-UD3L or GA-EP45-UD3L, at considerable savings, or a GA-EP45-UD3R if you prefer the heat pipes on the chipset coolers. Use the $$ you save on the MoBo for an E7500 or E7600. I could get one of those MBs and an E7500 for roughly the same price. That sounds like a better idea. Don't choke your system with too little slow RAM! Instead of the CPU upgrade, Get 4 GB of Patriot DDR2 1066 http://www.newegg.com/Product/Produc...82E16820220426 I was hoping to save a little money, but I guess I'll have to get 1066 if I'm going to get any of those 3 boards you mentioned. Deciding to go with a 500w PSU rather than the 700w should help offset that cost. Thanks |
#10
|
|||
|
|||
Building a new PC. Any comments on these parts?
I've considered previous comments and modified the list a bit.
Motherboard & CPU: GIGABYTE GA-EP43-UD3L LGA 775 Intel P43 ATX Intel Motherboard - Retail + Intel Core2 Duo E7500 Wolfdale 2.93GHz LGA 775 65W Dual-Core Processor Model BX80571E7500 - Retail = $185 http://www.newegg.com/Product/ComboD...t=Combo.253271 RAM: Patriot Viper II 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Desktop Memory w/Futuremark 3DMark Vantage Bundle Model PV224G8500ELKB - Retail $69 http://www.newegg.com/Product/Produc...82E16820220426 Power Supply: BFG Tech GS-550 550W ATX12V V2.2 / EPS12V V2.8 SLI Ready CrossFire Ready Power Supply - Retail $50 http://www.newegg.com/Product/Produc...82E16817702010 Add in the same case that I mentioned before and the grand total, including taxes and shipping, comes to $478, minus a $40 mail-in rebate. How's that look? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Building a new Computer - Please post your comments | newbee | Homebuilt PC's | 2 | February 14th 08 03:22 PM |
Parts Advice please! Building computer from donated systems. | Daniel | Homebuilt PC's | 3 | March 17th 06 10:24 AM |
Looking 4 comments on building this system | Marmot | Homebuilt PC's | 1 | August 10th 05 03:55 AM |
Building First Computer...need parts help! | David Zokvic | General Hardware | 4 | May 28th 04 12:18 AM |