If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Multiple monitors using motherboard's on-board graphics
I want to build a PC with 3-4 monitors using a cheaper option
(either 0/1 AGP card + 1-3 pci cards) rather than an expensive AGP card with 3 or 4 outputs like Matrox Parhelia or Nvidia Quadro. (I have no interest in 3D performance. This machine is for desktop work). Am thinking of getting some old PCI video cards with ~4 MB video memory. Can anyone tell me of any motherboards with on-board video (AMD socket A) that does not disable itself once AGP or PCI graphics cards are inserted? e.g. for a 4 monitor system, 1 will use on-board video, 3 others use either 3 PCI cards (keeping on-board video enabled in BIOS) or a combination of AGP and PCI cards. Has anyone used this kind of setup before and with what motherboard/graphics cards? TIA |
#3
|
|||
|
|||
On almost all motherboards you CANNOT use onboard video while using video
cards. -- DaveW "Market man" wrote in message om... I want to build a PC with 3-4 monitors using a cheaper option (either 0/1 AGP card + 1-3 pci cards) rather than an expensive AGP card with 3 or 4 outputs like Matrox Parhelia or Nvidia Quadro. (I have no interest in 3D performance. This machine is for desktop work). Am thinking of getting some old PCI video cards with ~4 MB video memory. Can anyone tell me of any motherboards with on-board video (AMD socket A) that does not disable itself once AGP or PCI graphics cards are inserted? e.g. for a 4 monitor system, 1 will use on-board video, 3 others use either 3 PCI cards (keeping on-board video enabled in BIOS) or a combination of AGP and PCI cards. Has anyone used this kind of setup before and with what motherboard/graphics cards? TIA |
#4
|
|||
|
|||
On Sun, 01 Aug 2004 22:06:48 GMT, "DaveW" wrote:
On almost all motherboards you CANNOT use onboard video while using video cards. Actually, most boards will allow you to use the on-board AGP video if you add a second *PCI* video adapter. I had no problem doing this with both an Intel 810 and an Intel 845 board, by adding an extra PCI video card. However, if the board has on-board AGP video and an AGP slot, then using the AGP slot will disable the on-board AGP video, since only one AGP device can be used at a time. I never tried more than two video cards at a time (for a total of three monitors) so I can't help the O.P. with his plan for 4 monitors. Windows NT systems (Win 2000 and XP) are supposed to support up to 9 monitors, so it should be possible. But that is a *lot* of display to be refreshing, so a fast system would be recommended. Also, I'd try to stick to the same brand of video card to make driver management a little easier. - - Gary L. Reply to the newsgroup only |
#5
|
|||
|
|||
Gary L. wrote:
On Sun, 01 Aug 2004 22:06:48 GMT, "DaveW" wrote: On almost all motherboards you CANNOT use onboard video while using video cards. Actually, most boards will allow you to use the on-board AGP video if you add a second *PCI* video adapter. I had no problem doing this with both an Intel 810 and an Intel 845 board, by adding an extra PCI video card. However, if the board has on-board AGP video and an AGP slot, then using the AGP slot will disable the on-board AGP video, since only one AGP device can be used at a time. I never tried more than two video cards at a time (for a total of three monitors) so I can't help the O.P. with his plan for 4 monitors. Seems to me the simplest solution would be to forget the on-board video, since they're usually lousy to begin with, and use a dual head AGP card with a dual head PCI, but then I've never tried that many either. Since he's not interested in 3D performance there's no reason to go with the modern 'exotics'. The ATI Radeon 7000 can be had in both AGP and PCI versions with dual head, one VGA and the other DVI, for $30 and $45 respectively although, at that price, you'd probably have to buy the DVI to VGA adapters separately. I've used both separately, but never together, so I don't know if that presents any problem for the ATI software. Windows NT systems (Win 2000 and XP) are supposed to support up to 9 monitors, so it should be possible. But that is a *lot* of display to be refreshing, Unless one is using on-board video with shared memory (which could only be one to being with), the 'refreshing' is handled by the video card's on-board memory. so a fast system would be recommended. Also, I'd try to stick to the same brand of video card to make driver management a little easier. - - Gary L. Reply to the newsgroup only |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What groups are there for monitors and LCD monitors? | Jacko | General | 0 | September 27th 04 09:51 PM |
250 watt and ATX 2.1 needed to kep xp 2000 board running ? | We Live for the One we Die for the One | Overclocking | 0 | May 31st 04 02:38 PM |
LCD monitors | valuing options | Evan Cooch | General | 10 | February 10th 04 07:40 PM |
defective main board or cpu ? | Robert L. | General | 11 | November 8th 03 10:39 PM |
Which NForce2 Ultra board? | BigBadger | Overclocking AMD Processors | 0 | August 14th 03 06:29 PM |