If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
P4P800 wakeup from Suspend Problem
Is anybody able to move the mouse or press the space bar to wakeup their pc?
I just flashed to the 1008 bios which is supposed to fix it, but it still doesn't work. The power button wakes the pc up fine. The settings are enabled in the bios. The ps is brand new (p4 compliant antec 380) |
#2
|
|||
|
|||
It is set to Auto. Both mouse and keyboard are ps/2 Should I make it S1?
"jaeger" wrote in message . .. In article , says... Is anybody able to move the mouse or press the space bar to wakeup their pc? I just flashed to the 1008 bios which is supposed to fix it, but it still doesn't work. The power button wakes the pc up fine. The settings are enabled in the bios. The ps is brand new (p4 compliant antec 380) Are you using S1 or S3 sleep mode, and are your mouse/kb USB or PS/2? |
#3
|
|||
|
|||
Actually I tried Auto, S1, and S3
Auto shuts off most of the fans as does S3 and will only wake up by pressing the power button S1 leaves the fans on but still doesn't wake up by mouse or keyboard I read in the manual that you must get 1A to the +5vsb lead. I am not sure if it gets that by default or something needs to be plugged in for that. "jaeger" wrote in message . .. In article , says... Is anybody able to move the mouse or press the space bar to wakeup their pc? I just flashed to the 1008 bios which is supposed to fix it, but it still doesn't work. The power button wakes the pc up fine. The settings are enabled in the bios. The ps is brand new (p4 compliant antec 380) Are you using S1 or S3 sleep mode, and are your mouse/kb USB or PS/2? |
#4
|
|||
|
|||
It was the keyboard jumper on the mobo. It's working fine now. I had
written before you responded the 2nd time. I'm not sure why they don't enable that by default. On my p4pe I don't remember doing that. Thanks for your help. "jaeger" wrote in message . .. In article , says... Actually I tried Auto, S1, and S3 Auto shuts off most of the fans as does S3 and will only wake up by pressing the power button S1 leaves the fans on but still doesn't wake up by mouse or keyboard I read in the manual that you must get 1A to the +5vsb lead. I am not sure if it gets that by default or something needs to be plugged in for that. Hm, I don't have any PS/2 devices to test. For me my USB kb will wake from S3 fine, after installing the Windows registry patch need to enable USB wake. That won't help you though. Look on your power supply label and ensure that the +5vsb rail is rated at 2A. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help needed with unidentified problem | ^MisterJingo^ | General | 3 | November 23rd 04 05:45 AM |
Mouse Problem | Jeff | Homebuilt PC's | 0 | October 1st 04 06:44 AM |
help with possible video card problem diagnostic | mark497 | Homebuilt PC's | 1 | September 16th 04 09:59 AM |
Boot Problem with Win2000 AMD 2500 XP - A-Bit KD7A system | TMgo | Homebuilt PC's | 2 | August 17th 04 10:03 AM |
Restart problem | DJS0302 | Homebuilt PC's | 0 | June 20th 04 07:37 AM |