If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Netvault 7.1 with Breece Hill 8-Pak AIT3
I started with a new company and I inheirited a backup system problem.
This has a NetVault 7.1 with patch E installed. A Breece Hill 8 pak library, on a Windows 2000 server. The 8-pak has the library set to SCSI 0 and the tape drive itself set to SCSI 1. The library has been replaced by Breece Hill, but the problem is the same. In device manager, the library automatically appears but he tape drive is only visible when manually added.. The problem lies in NetVault - it will see the library but will not see the tape drive. Bakbone had me uninstall and reinstall, then remove the devices in device manager and reboot the server. RSM is disabled in Windows per Bakbone's instructions. Bakbone is stumped. Any ideas? Mike |
Thread Tools | |
Display Modes | |
|
|