A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Nvidia Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

LINUX 53.28 BAD Performance?



 
 
Thread Tools Display Modes
  #1  
Old December 28th 03, 06:39 PM
Gizmo
external usenet poster
 
Posts: n/a
Default LINUX 53.28 BAD Performance?

hi there,
i have installed the latest nVIDIA display-driver (53.28) for LINUX. first
i had problems to build some of my projects in OpenGL now the linker
works, but i have a very bad performance in OpenGL.
is it possible that the new 53.28 driver is worse than the old one thats
installed with LINUX-9??
  #2  
Old December 28th 03, 11:23 PM
baskitcaise
external usenet poster
 
Posts: n/a
Default

Gizmo wrote:

hi there,
i have installed the latest nVIDIA display-driver (53.28) for LINUX. first
i had problems to build some of my projects in OpenGL now the linker
works, but i have a very bad performance in OpenGL.
is it possible that the new 53.28 driver is worse than the old one thats
installed with LINUX-9??


Have them installed here and just been playing ET, can`t say if they are
better than the last but they are not worse, glxgears are about the same,
picture quality about same ( [email protected], [email protected], vsync off ).

MSI G/Force FX5600 256meg
Soltek N/F2 ultra 400
1 gig 3200
Barton 2800+ @ 2255Mhz
Suse Pro 9.0, 2.4.21-144
S/Blive 5.1
--
Mark
Twixt hill and high water.
N.Wales, UK.
Email is spam trap try baskitcaise at gmx dot co dot uk
  #3  
Old December 29th 03, 10:20 AM
Gizmo
external usenet poster
 
Posts: n/a
Default

Am Sun, 28 Dec 2003 23:23:49 +0000 schrieb baskitcaise:

Have them installed here and just been playing ET, can`t say if they are
better than the last but they are not worse, glxgears are about the same,
picture quality about same ( [email protected], [email protected], vsync off ).

MSI G/Force FX5600 256meg
Soltek N/F2 ultra 400
1 gig 3200
Barton 2800+ @ 2255Mhz
Suse Pro 9.0, 2.4.21-144
S/Blive 5.1


is it the same on RedHat LINUX 9.0? i can't say that my
performance is really better than before. i can't
even play "Tux-Racer"!
  #4  
Old December 29th 03, 11:20 AM
baskitcaise
external usenet poster
 
Posts: n/a
Default

Gizmo wrote:

Am Sun, 28 Dec 2003 23:23:49 +0000 schrieb baskitcaise:

Have them installed here and just been playing ET, can`t say if they are
better than the last but they are not worse, glxgears are about the same,
picture quality about same ( [email protected], [email protected], vsync off ).

MSI G/Force FX5600 256meg
Soltek N/F2 ultra 400
1 gig 3200
Barton 2800+ @ 2255Mhz
Suse Pro 9.0, 2.4.21-144
S/Blive 5.1


is it the same on RedHat LINUX 9.0? i can't say that my
performance is really better than before. i can't
even play "Tux-Racer"!



Sorry I don`t know what Red Hat runs like with the new Nvidias ( have not
tried Red Hat since 5.1 ), suppose it could be down to the kernel version but
should not matter, I know that the default kernel that came with Suse 9 had a
load of "features" that made it impossible to install the nforce board so I
just upgraded as soon as it was installed and voila all is happy and running
smooth here.

I take it that you are not getting any 3D accel if you cannot run Tux Racer?

give us a cut`n`paste from your /var/log/XFree86.0.log so that we can see
where the errors are occuring, also your XF86Config (-4)? would be handy.

Which Nvidias by the way?

--
Mark
Twixt hill and high water.
N.Wales, UK.
Email is spam trap try baskitcaise at gmx dot co dot uk
  #5  
Old December 30th 03, 11:01 AM
The Black Wibble
external usenet poster
 
Posts: n/a
Default

Gizmo wrote:
Am Sun, 28 Dec 2003 23:23:49 +0000 schrieb baskitcaise:


Have them installed here and just been playing ET, can`t say if they are
better than the last but they are not worse, glxgears are about the same,
picture quality about same ( [email protected], [email protected], vsync off ).

MSI G/Force FX5600 256meg
Soltek N/F2 ultra 400
1 gig 3200
Barton 2800+ @ 2255Mhz
Suse Pro 9.0, 2.4.21-144
S/Blive 5.1



is it the same on RedHat LINUX 9.0? i can't say that my
performance is really better than before. i can't
even play "Tux-Racer"!


If you uninstalled the XFree86-Mesa-libGL package before installing the
nVidia drivers, reinstall it. Tux Racer and Chromium do not like one of
the nVidia OpenGL lib substitutes. The only downside I've found so far
is that some of the GLX screen savers often don't work.

Tony.

  #6  
Old December 30th 03, 12:03 PM
The Black Wibble
external usenet poster
 
Posts: n/a
Default

The Black Wibble wrote:
Gizmo wrote:

Am Sun, 28 Dec 2003 23:23:49 +0000 schrieb baskitcaise:


Have them installed here and just been playing ET, can`t say if they are
better than the last but they are not worse, glxgears are about the
same,
picture quality about same ( [email protected], [email protected], vsync off ).

MSI G/Force FX5600 256meg
Soltek N/F2 ultra 400
1 gig 3200
Barton 2800+ @ 2255Mhz
Suse Pro 9.0, 2.4.21-144
S/Blive 5.1




is it the same on RedHat LINUX 9.0? i can't say that my performance is
really better than before. i can't even play "Tux-Racer"!



If you uninstalled the XFree86-Mesa-libGL package before installing the
nVidia drivers, reinstall it. Tux Racer and Chromium do not like one of
the nVidia OpenGL lib substitutes. The only downside I've found so far
is that some of the GLX screen savers often don't work.


Odd. I just upgraded from 44.96 to 53.28 and now all the screen-savers
work. :-/ Woo-hoo!

Tony.

---
3GHz P4 (HT enabled)
Asus P4C800-E Deluxe (15 x 200MHz)
MSI FX5900U-VTD256 (BIOS 4.35.20.22.0)
2x 512MB Kingston PC3500
2x 36.7 SATA WD Raptors
52/32/52 LiteOn CD-Writer
16x Pioneer DVD-120S
Enermax 550W PSU
Windows XP Pro & Linux Fedora Core 1
PC-70 Lian Li case w/ side window
Hitachi 174SXW B 17" LCD

  #7  
Old December 31st 03, 03:31 PM
Gizmo
external usenet poster
 
Posts: n/a
Default

give us a cut`n`paste from your /var/log/XFree86.0.log so that we can see
where the errors are occuring, also your XF86Config (-4)? would be handy.



---XFree86.0.log---
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com

Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.20-8 ) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 P
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Dec 31 15:38:03 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Default Layout"
(**) |--Screen "Screen0" (0)
(**) | |--Monitor "Monitor0"
(**) | |--Device "Videocard0"
(**) |--Input Device "Mouse0"
(**) |--Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 8

(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8001004c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 1244,0a00 card 1244,0a00 rev 02 class 02,80,00 hdr 00
(II) PCI: 00:07:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr 00
(II) PCI: 00:08:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 8086,1040 card 16be,1040 rev 00 class 07,80,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1462,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1462,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1462,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1462,3038 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,3074 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1462,3822 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0253 card 1462,8790 rev a3 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7ffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe8000000/24, 0xd8000000/27, 0xe0000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb403000 - 0xeb4030ff (0x100) MX[b]
[1] -1 0 0xeb000000 - 0xeb3fffff (0x400000) MX[b]
[2] -1 0 0xeb400000 - 0xeb4000ff (0x100) MX[b]
[3] -1 0 0xeb402000 - 0xeb4027ff (0x800) MX[b]
[4] -1 0 0xeb401000 - 0xeb40101f (0x20) MX[b]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[6] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[b](B)
[7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[8] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[9] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[b]
[10] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[11] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
[12] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[13] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[b]
[14] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[15] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
[16] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb403000 - 0xeb4030ff (0x100) MX[b]
[1] -1 0 0xeb000000 - 0xeb3fffff (0x400000) MX[b]
[2] -1 0 0xeb400000 - 0xeb4000ff (0x100) MX[b]
[3] -1 0 0xeb402000 - 0xeb4027ff (0x800) MX[b]
[4] -1 0 0xeb401000 - 0xeb40101f (0x20) MX[b]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[6] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[b](B)
[7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[8] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[9] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[b]
[10] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[11] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
[12] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[13] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[b]
[14] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[15] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
[16] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xeb403000 - 0xeb4030ff (0x100) MX[b]
[6] -1 0 0xeb000000 - 0xeb3fffff (0x400000) MX[b]
[7] -1 0 0xeb400000 - 0xeb4000ff (0x100) MX[b]
[8] -1 0 0xeb402000 - 0xeb4027ff (0x800) MX[b]
[9] -1 0 0xeb401000 - 0xeb40101f (0x20) MX[b]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[11] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[b](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[13] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[b]
[17] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
[19] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[20] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[b]
[21] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[22] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
[23] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.5328
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.5328
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-5328 Wed Dec 17 13:56:09 PST 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xeb403000 - 0xeb4030ff (0x100) MX[b]
[6] -1 0 0xeb000000 - 0xeb3fffff (0x400000) MX[b]
[7] -1 0 0xeb400000 - 0xeb4000ff (0x100) MX[b]
[8] -1 0 0xeb402000 - 0xeb4027ff (0x800) MX[b]
[9] -1 0 0xeb401000 - 0xeb40101f (0x20) MX[b]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[11] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[b](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[13] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[b]
[17] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[18] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
[19] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[20] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[b]
[21] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[22] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
[23] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xeb403000 - 0xeb4030ff (0x100) MX[b]
[6] -1 0 0xeb000000 - 0xeb3fffff (0x400000) MX[b]
[7] -1 0 0xeb400000 - 0xeb4000ff (0x100) MX[b]
[8] -1 0 0xeb402000 - 0xeb4027ff (0x800) MX[b]
[9] -1 0 0xeb401000 - 0xeb40101f (0x20) MX[b]
[10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[11] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[b](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[13] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[b]
[20] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[21] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
[22] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[23] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[b]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[25] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
[26] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xE8000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4200
(--) NVIDIA(0): VideoBIOS: 04.25.00.32.15
(--) NVIDIA(0): VideoRAM: 65536 kByte
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Detected TV Encoder: Philips 7102
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) NVIDIA(0): Monitor0: Using hsync range of 30.00-81.00 kHz
(II) NVIDIA(0): Monitor0: Using vrefresh range of 56.00-76.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(WW) (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 140MHz
(WW) (1600x1200,Monitor0) mode clock 175.5MHz exceeds DDC maximum 140MHz
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x432" (vrefresh out of range)
(WW) (1400x1050,Monitor0) mode clock 151MHz exceeds DDC maximum 140MHz
(WW) (1400x1050,Monitor0) mode clock 155.8MHz exceeds DDC maximum 140MHz
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(**) NVIDIA(0): Display dimensions: (340, 270) mm
(**) NVIDIA(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe0000000 - 0xe007ffff (0x80000) MX[b]
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b]
[2] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xeb403000 - 0xeb4030ff (0x100) MX[b]
[9] -1 0 0xeb000000 - 0xeb3fffff (0x400000) MX[b]
[10] -1 0 0xeb400000 - 0xeb4000ff (0x100) MX[b]
[11] -1 0 0xeb402000 - 0xeb4027ff (0x800) MX[b]
[12] -1 0 0xeb401000 - 0xeb40101f (0x20) MX[b]
[13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[14] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[b](B)
[15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[16] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[b]
[23] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[b]
[24] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
[25] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[26] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[b]
[27] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[28] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
[29] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(WW) NVIDIA(0): Failed to verify AGP usage
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing extension GLX
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) Mouse0: ps2EnableDataReporting: succeeded


---XF86Config---
# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "SyncMaster"
DisplaySize 340 270
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 4 (generic)"
VideoRam 65536
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection
  #8  
Old December 31st 03, 07:40 PM
baskitcaise
external usenet poster
 
Posts: n/a
Default

Gizmo wrote:

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "SyncMaster"
DisplaySize 340 270
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
Option "dpms"
EndSection


Are you sure that these are the right refresh rates for you monitor?

Vertical 56.0 - 76.0 seems a bit low to me, what are the specs of the monitor?


Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 4 (generic)"
VideoRam 65536
EndSection


Try putting:-

Option "NvAGP" "1"

( or "3" might help )

underneath:-

Driver "nvidia"



Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24


You could try a default depth of 16 here and below instead of 24, might not do
anything but won`t hurt

SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection


Here is my XF86Config on a working system with an FX5600, note the diffs and
see if any help you, this XF86Config has worked flawless for the last 3
nvidias I have had with just a change to the AGP and the card id, everything
else is the same.

Have snipped the begining as it is boring stuff about fonts

------snip-------

Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection

Section "Module"
Load "freetype"
Load "extmod"
Load "dbe"
Load "glx"
Load "speedo"
Load "v4l" ---------needed for my tv card and stuff
Load "type1"
EndSection

Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "gb"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
EndSection


Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/mouse"
Option "Name" "Autodetection"
Option "Protocol" "imps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 320 240
HorizSync 28-69
Identifier "Monitor[0]"
ModelName "STUDIOWORKS 77T5"
Option "DPMS"
VendorName "LG ELECTRONICS"
VertRefresh 50-120
UseModes "Modes[0]"
EndSection


Section "Modes"
Identifier "Modes[0]"
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
Modeline "1152x864" 104.99 1152 1176 1304 1568 864 865 868 902
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
Modeline "1024x768" 93.16 1024 1088 1200 1376 768 769 772 806
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635
Modeline "800x600" 72.50 800 848 936 1072 600 601 604 638
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
EndSection


Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Section "Device"
BoardName "0x0312"
Driver "nvidia"
Identifier "Device[0]"
Option "PageFlip" "off"
Option "NoLogo" "1"
Option "NvAGP" "3" ---neede for me on this Nforce2 ultra board
Option "HWCursor" "off"
Screen 0
Option "Rotate" "off"
VendorName "NVidia"
EndSection


Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

------snip-------


HTH

--
Mark
Twixt hill and high water.
N.Wales, UK.
Email is spam trap try baskitcaise at gmx dot co dot uk
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Partitioning for XP & Linux, How Much for What? Nehmo Sergheyev Homebuilt PC's 51 October 11th 04 06:16 PM
my new mobo o/c's great rockerrock Overclocking AMD Processors 9 June 30th 04 08:17 PM
Top performance on 8INXP in detail Axl Gigabyte Motherboards 3 February 20th 04 08:36 PM
Qs about motherboard/components for homebuild AMD system Milt Epstein Homebuilt PC's 18 September 27th 03 05:10 PM
Extremely slow HDD write performance with GigaRAID on KNXP pinky Gigabyte Motherboards 0 September 20th 03 03:01 PM


All times are GMT +1. The time now is 08:55 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 HardwareBanter.
The comments are property of their posters.