A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Ati Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

BIOS settings with new ATI Radeon 9600XT



 
 
Thread Tools Display Modes
  #1  
Old January 26th 05, 06:35 AM
Mike
external usenet poster
 
Posts: n/a
Default BIOS settings with new ATI Radeon 9600XT

Hey everyone. I have a couple of BIOS setting questions I am hoping someone
could help clear up for me here. I am running WinXP SP2 on a P4 1.5 Ghz
system with an ASUS P4B mobo and AwardBIOS.

I just bought an 128mb ATI Radeon 9600XT after Christmas to replace my 64mb
PCI GeForce4 MX for better gaming. So far, so good; but I wasn't impressed
with the quality of watching video files (mpeg, avi, etc.,) full-screen with
this new card compared to my old GeForce, so I decided to see if I had to
change some BIOS settings to accomodate the new AGP card. I had totally
uninstalled the old GeForce card before installing the new ATI one (drivers
and software), but wasn't sure if I had to change some BIOS settings to
accomodate new AGP card.

The first two settings I changed was under Chip Configuration where I
changed the Optimization Mode to Turbo 1 from Normal (options were Normal,
Turbo 1, Turbo 2). I know my MOBO book said Turbo mode enhances system
performance, but how and is it good to have on.

Next, I changed Graphics Aperture Size from 64mb to 128mb. Is this okay? My
book said this feature allows you to select the size of mapped memory for
AGP graphic data. With the card being 128mb, does this mean you set this
setting to 128mb or am I totally misunderstanding what this setting means?
Lastly, I changed Primary VGA Bcard under PCI Configuration to AGP VGA card
from PCI VGA card. What is this setting for and should I have left it on PCI
VGA card for some reason?

Sorry for the length of this and thanks for any help in advance. Also, if
there are any BIOS settings I was supposed to tweak or change, feel free to
let me know what I may have missed.

Thanks again,
Mike


  #2  
Old January 26th 05, 10:36 AM
Sleepy
external usenet poster
 
Posts: n/a
Default


"Mike" wrote in message
...
Hey everyone. I have a couple of BIOS setting questions I am hoping
someone
could help clear up for me here. I am running WinXP SP2 on a P4 1.5 Ghz
system with an ASUS P4B mobo and AwardBIOS.

I just bought an 128mb ATI Radeon 9600XT after Christmas to replace my
64mb
PCI GeForce4 MX for better gaming. So far, so good; but I wasn't impressed
with the quality of watching video files (mpeg, avi, etc.,) full-screen
with
this new card compared to my old GeForce, so I decided to see if I had to
change some BIOS settings to accomodate the new AGP card. I had totally
uninstalled the old GeForce card before installing the new ATI one
(drivers
and software), but wasn't sure if I had to change some BIOS settings to
accomodate new AGP card.

The first two settings I changed was under Chip Configuration where I
changed the Optimization Mode to Turbo 1 from Normal (options were Normal,
Turbo 1, Turbo 2). I know my MOBO book said Turbo mode enhances system
performance, but how and is it good to have on.

Next, I changed Graphics Aperture Size from 64mb to 128mb. Is this okay?
My
book said this feature allows you to select the size of mapped memory for
AGP graphic data. With the card being 128mb, does this mean you set this
setting to 128mb or am I totally misunderstanding what this setting means?
Lastly, I changed Primary VGA Bcard under PCI Configuration to AGP VGA
card
from PCI VGA card. What is this setting for and should I have left it on
PCI
VGA card for some reason?

Sorry for the length of this and thanks for any help in advance. Also, if
there are any BIOS settings I was supposed to tweak or change, feel free
to
let me know what I may have missed.

Thanks again,
Mike

Bios settings may alter the performance slightly but not the image quality.
Radeons have slightly better image quality than Nvidia - when I went from a
Geforce to a Radeon I noticed slightly sharper DVD with more natural and
less saturated colours.
I would uninstall and reinstall your Media Player and codecs and see if that
helps.

btw only put Bios settings from Normal to Turbo if you have good low latency
RAM otherwise you risk making your PC unstable.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
IDE RAID- Major problem need to save my data MC General 21 December 5th 04 06:38 AM
Bios Settings for A7N8X-X and Athlon XP 2800+ Edson Alvarenga Asus Motherboards 2 May 26th 04 12:45 PM
Save / Restore /Alter Bios Settings P4C800-E DELUX TONY STEWART Asus Motherboards 2 May 15th 04 03:14 PM
A7N8X-VM Radeon 9600XT - No video - No beep bmonteen Asus Motherboards 1 February 10th 04 12:53 AM
Help with BIOS settings Alan Homebuilt PC's 4 January 23rd 04 04:39 AM


All times are GMT +1. The time now is 01:55 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.