If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#51
|
|||
|
|||
Ixnei wrote: On Mon, 03 May 2004 22:56:51 +0200, Roland Scheidegger wrote: I was unable to get any replacement capacitors for now, if I'd be convinced that it really would help I'm sure I could find some shop which has them (I only found rubycon zl 10V parts as the closest match, but the 1000uF part is 10mm in diameter and thus not suitable for replacing the 8mm parts). I could still try lowering vtt voltage, but somehow I'm not confident it would help. :-( Roland Just out of curiousity, what video card are you using with your setup? Also, did you happen to run 3dmark2001? FYI, test #15 (advanced pixel shader?, where it rebooted on me) is not performed on older video cards like the geforce2 gts. So if I had used one of my GF2's instead of a GF3, I wouldn't have gotten a reboot... I know this is a triviality, as memtest can be used as a signal for the problem, but ... I may bite the bullet and just swap out the $5 or so worth of caps on this board. I will add a 1000uF where there is one missing by the slot1 (CE3), maybe the same for the cap missing next to the DIMM slots (CE27), and I will also increase the 1000uF cap to 1500uF where the board indicates a larger drawn (CE12). Will post back later if/when I do this, and results... I'll wager a Slot-T against a P2B v1.10 it won't make a difference ;-) P2B |
#52
|
|||
|
|||
I was unable to get any replacement capacitors for now, if I'd be
convinced that it really would help I'm sure I could find some shop which has them (I only found rubycon zl 10V parts as the closest match, but the 1000uF part is 10mm in diameter and thus not suitable for replacing the 8mm parts). I could still try lowering vtt voltage, but somehow I'm not confident it would help. we have 8mm caps you can use go to: www.computekinc.us you'll find the impossible to find caps for mobos there. we use 10v in the 6.3v spots on most boards. ============== Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups. |
#53
|
|||
|
|||
Hi,
just to drop in a few lines: I have the same problem - and of course I'am interested if fiddeling around with capacitors will solve it. Board: Asus P2B (No further letters) Rev.: 1.10 Cpu: PIII-800 (Copper, 100Mhz FSB, 1,65 V) OS: Linux with Kernel 2.2.14 (Uptime 2 Years now) VReg: HIP6019BCB Mem: Just upgraded from 2*64K - 2*128K 100Mhz SRAM Cards: ELSA Winner 1000 VGA, SCSI, ISDN, Network, 2nd Printer (Because of the memory upgrade, I run in the memtest prob.) Sven-Ola ============== Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups. |
#54
|
|||
|
|||
On Fri, 11 Jun 2004 12:06:35 -0400, sven-ola wrote:
Hi, just to drop in a few lines: I have the same problem - and of course I'am interested if fiddeling around with capacitors will solve it. Board: Asus P2B (No further letters) Rev.: 1.10 Cpu: PIII-800 (Copper, 100Mhz FSB, 1,65 V) OS: Linux with Kernel 2.2.14 (Uptime 2 Years now) VReg: HIP6019BCB Mem: Just upgraded from 2*64K - 2*128K 100Mhz SRAM Cards: ELSA Winner 1000 VGA, SCSI, ISDN, Network, 2nd Printer (Because of the memory upgrade, I run in the memtest prob.) What type of processor are you using? Is it a true slot1 processor, or a socket 370 in a slotket? What slotket? I was having the memtest test #6 problem with a coppermine celeron 900/100 and 600/66 running 256MB ram, both in a 370SPC v1.0 slocket. I managed to pick up an Asus S370-DL rev 1.02 slotket, and it ran a coppermine celeron 1100/100 with 512MB on the P2B rev 1.10, passing memtest looping for hours (with fastest CL2 memory timings). So, there does appear to be a marginality created by the quality of slotket used. I ended up dumping the board for $25, and moved on already... -- We HAVE been at war with Iraq for 14 years now, bombing their country on at least a weekly basis. "U.S.-led sanctions have killed over a million Iraqi citizens, according to UN studies" - James Jennings 3,000+ innocent Iraqi civilian casualties can't be "wrong"... |
#55
|
|||
|
|||
What type of processor are you using? Is it a true slot1 processor,
or a socket 370 in a slotket? What slotket? Thats a real PIII without slotket/riser/adapter. I'am not able to extract the processor right now (it's a production system), but boot.msg states: 4CPU: Intel Pentium III (Coppermine) stepping 06 ============== Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sudden incompatibility between Asus Motherboard p4s3 and Asus v7700 video card | Wil | General | 0 | November 25th 04 11:38 AM |
ASUS K8V Deluxe - Motherboard | Andre | General | 2 | October 13th 04 01:46 AM |
64 benches | Ed Light | AMD x86-64 Processors | 2 | April 4th 04 08:16 PM |