A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Processors » Overclocking AMD Processors
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

ATA 100 / 133 hard drives



 
 
Thread Tools Display Modes
  #1  
Old May 29th 07, 04:55 AM posted to alt.comp.hardware.overclocking.amd
JNB
external usenet poster
 
Posts: 1
Default ATA 100 / 133 hard drives

ABIT KV7 motherboard with two Maxtor ATA 133 drives.
I would like to buy at least one new drive and wonder if
ATA 100 drive would work with the 133 drives on the
same channel or on different channel and need info on
SATA drives, can they work with 133 or 100 drives?

JNB

  #2  
Old May 29th 07, 05:09 AM posted to alt.comp.hardware.overclocking.amd
don't look[_2_]
external usenet poster
 
Posts: 94
Default ATA 100 / 133 hard drives

The two specs are essentially the same.

"JNB" wrote in message
ups.com...
ABIT KV7 motherboard with two Maxtor ATA 133 drives.
I would like to buy at least one new drive and wonder if
ATA 100 drive would work with the 133 drives on the
same channel or on different channel and need info on
SATA drives, can they work with 133 or 100 drives?

JNB



  #3  
Old May 29th 07, 05:18 AM posted to alt.comp.hardware.overclocking.amd
don't look[_2_]
external usenet poster
 
Posts: 94
Default ATA 100 / 133 hard drives

They are essentially the same. Even if your motherboards IDE controller is
ATA133(UDMA6) the drive could still be configured as ATA 100 because of
problems with the ata133 SPEC..
http://www.hardwaresecrets.com/article/45/2

"JNB" wrote in message
ups.com...
ABIT KV7 motherboard with two Maxtor ATA 133 drives.
I would like to buy at least one new drive and wonder if
ATA 100 drive would work with the 133 drives on the
same channel or on different channel and need info on
SATA drives, can they work with 133 or 100 drives?

JNB



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fans/Hard Drives/Dvd Drives power up but no display. -.- [email protected] Asus Motherboards 8 October 28th 06 03:59 PM
2 IDE hard drives? Lez Pawl Homebuilt PC's 8 October 15th 06 09:00 PM
OT Mirror Hard USB/FireWire hard drives Robert R Kircher, Jr. Dell Computers 4 November 10th 04 04:50 AM
6 Hard Drives - IDE Drives Too Hot To Touch - Drive on Promise Card Barely Warm Carol General Hardware 1 August 2nd 04 11:16 PM
Mapped Network Drives, USB Hard drives and "Not enough server storage is available to process this command" CWatters Storage (alternative) 1 November 14th 03 09:35 AM


All times are GMT +1. The time now is 08:22 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.