If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
HPpsc2210
I'm going thru Fax hell .. and is the following true ? I've tried every
combo you can imagine ..and still can't get it right ..and just now read this. Can someone with the exact model as I've got tell me.. how on earth the use the answer machine (set at 3 rings) and the fax (set at 6 rings) to always work ? Just now read this..that you have to have your answer machine plugged directly into the printer ...AWK is that correct ? the HP PSC is not answering incoming calls cause The answering machine is on the same line. solution If you have a telephone answering machine on the same line as your HP PSC, you must connect the answering machine to the port on the back of the HP PSC. You may need to change the number of rings to make sure the answering machine answers first. Set the HP PSC to a higher number than your answering machine |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
|
#4
|
|||
|
|||
x-no-archive: yes
isn't that funny ?? same problem.. have you solved it yet ? I just posted on the newsgroup suggested and if I get a reply I'll send it to you .. here is the strangest yet.. I completely turned off the printer and PC last nite, had a thunderstorm..this am I tried to send a fax and it went thru perfectly .. and the land line phone and answermachine didn't stay busy afterwards.. still don't know if I can receive one or not |
#5
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|