If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
USB 3.0 hub question
I'm thinking about buying a USB 3.0 external hub for my pc. I'm
looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. Thanks, John |
#2
|
|||
|
|||
USB 3.0 hub question
On Wed, 1 Aug 2018 17:23:28 -0000 (UTC), "Yes"
wrote: I'm thinking about buying a USB 3.0 external hub for my pc. I'm looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. Thanks, John FWIW, if you find a hub that you like "except" for the length of the cable, there are USB3 "extension" cables (male/female) of whatever length you need. |
#3
|
|||
|
|||
USB 3.0 hub question
Charlie Hoffpauir wrote:
On Wed, 1 Aug 2018 17:23:28 -0000 (UTC), "Yes" wrote: I'm thinking about buying a USB 3.0 external hub for my pc. I'm looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. Thanks, John FWIW, if you find a hub that you like "except" for the length of the cable, there are USB3 "extension" cables (male/female) of whatever length you need. The OP never mentioned which USB hubs (or USB switches) he looked at on Newegg's web site. There are plenty that do NOT have an attached USB cable. In fact, those with an attached cable are usually meant for portable use with laptops, netbooks, etc. Typically a desktop USB hub/switch has no attached cable and you attach whatever cable you want to connect it to the computer. |
#4
|
|||
|
|||
USB 3.0 hub question
VanguardLH wrote:
Charlie Hoffpauir wrote: On Wed, 1 Aug 2018 17:23:28 -0000 (UTC), "Yes" wrote: I'm thinking about buying a USB 3.0 external hub for my pc. I'm looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. Thanks, John FWIW, if you find a hub that you like "except" for the length of the cable, there are USB3 "extension" cables (male/female) of whatever length you need. The OP never mentioned which USB hubs (or USB switches) he looked at on Newegg's web site. There are plenty that do NOT have an attached USB cable. In fact, those with an attached cable are usually meant for portable use with laptops, netbooks, etc. Typically a desktop USB hub/switch has no attached cable and you attach whatever cable you want to connect it to the computer. Not necessary. As noted, I already went through them looking for length of the cord. They were too short for my use. After I posted, I did check Best Buy (not my first choice or even second choice of vendors) and found they categorized their hubs by "stationary" and "portable (??). BB did list a stationary hub by Insignia that commenters report it has a 3' cord. Newegg does not carry that item. They did have a USB 2.0 hub. John |
#5
|
|||
|
|||
USB 3.0 hub question
Yes wrote:
VanguardLH wrote: Charlie Hoffpauir wrote: Yes wrote: I'm thinking about buying a USB 3.0 external hub for my pc. I'm looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. FWIW, if you find a hub that you like "except" for the length of the cable, there are USB3 "extension" cables (male/female) of whatever length you need. The OP never mentioned which USB hubs (or USB switches) he looked at on Newegg's web site. There are plenty that do NOT have an attached USB cable. In fact, those with an attached cable are usually meant for portable use with laptops, netbooks, etc. Typically a desktop USB hub/switch has no attached cable and you attach whatever cable you want to connect it to the computer. Not necessary. As noted, I already went through them looking for length of the cord. So why not look at the ones that do NOT have an attached (permanent) cable to the USB hub? A permanent cable rather limits the flexibility in where the hub can be positioned. They were too short for my use. After I posted, I did check Best Buy (not my first choice or even second choice of vendors) and found they categorized their hubs by "stationary" and "portable (??). BB did list a stationary hub by Insignia that commenters report it has a 3' cord. Newegg does not carry that item. They did have a USB 2.0 hub. Just because a hub lists an included cable does not mean the cable is permanently attached to the hub. For example: https://www.newegg.com/Product/Produ...01&ignorebbr=1 That comes with a 1-meter USB3 cable but it gets plugged in on the backside of the hub. https://www.newegg.com/Product/Produ...0079080%208000 There are many there that have non-permanent (detachable) input USB3 cables; i.e., they have a USB3 port to connect via whatever cable you want to use to the computer. You can get micro-B to type A USB cables of varying lengths. For example: https://www.newegg.com/Product/Produ...82E16812225081 https://www.newegg.com/Product/Produ...82E16812423106 I use double-stick velcro strips to affix the hub atop the computer case rather than clutter my desk, so the cable only has to be long enough to reach from the hub to the backpanel or daughtercard USB port. Also remember that with a hub that it will share the bandwidth of just the one parent USB port to which you connect the hub to the computer for ALL of the hub's USB ports. Anything that generates lots of traffic, like printing, file transfers to hard disks, especially with both on the same hub, and a USB network adapter will generate high volumes of traffic that will choke the bandwidth available for the remaining ports on the hub. Ports on a hub do not communicate with each other; that is, you cannot short-circuit the data path of, say, a file transfer between two USB devices on the same hub. |
#6
|
|||
|
|||
USB 3.0 hub question
Charlie Hoffpauir wrote:
On Wed, 1 Aug 2018 17:23:28 -0000 (UTC), "Yes" wrote: I'm thinking about buying a USB 3.0 external hub for my pc. I'm looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. Thanks, John FWIW, if you find a hub that you like "except" for the length of the cable, there are USB3 "extension" cables (male/female) of whatever length you need. The one I tried (Wavetek??) seemed to be unreliable with my USB 3.0 drives - got error message. Worked OK if plugged it in USB 2.0, but that of course defeats the reason for me using it. John |
#7
|
|||
|
|||
USB 3.0 hub question
On Wed, 1 Aug 2018 19:19:27 -0000 (UTC), "Yes"
wrote: The one I tried (Wavetek??) seemed to be unreliable with my USB 3.0 drives - got error message. Worked OK if plugged it in USB 2.0, but that of course defeats the reason for me using it. Sounds like they're all -- NewEgg, BestBuy, &etc -- subsets of what a search on Ebay, (direct Chinese marketing vendors), or, possibly 1007 USB3 similar items might turn up before filtering and drilling through them. And they, the final results, may be no less inconclusive to actual and expected results you're already experiencing, that 'hit and miss' aspect that says the useless NewEgg 3" model is effectively covering its butt before exceeding a liklihood of pragmatic failure from anything with a longer cord. You may as well now double-check the Amazon reviews, which is even better as Amazon surpasses NewEgg on a return policy for merchandise that fails to meet product specifications. In case you haven't already. Or then also compare to Ebay pricing in case you find or feel you don't need to pay Amazon 33% more markup for an item you don't expect to return. While you can. Someday, the way computers are, between various inconsistencies, Amazon may rescind its stand for the last of merchants with a liberal cost-return policy. As it is, for some technology and computer items, Amazon will inspect for a valid working condition, a 15% surcharge can then be impressed. No surprise that's still then by law carries a later resale as discounted, or for Amazon, and used merchandise. Ebay, many merchants, will sell or attempt the same thing for new once again. |
#8
|
|||
|
|||
USB 3.0 hub question
Yes wrote:
I'm thinking about buying a USB 3.0 external hub for my pc. I'm looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. Thanks, John The hubs with the captive or attached cables seem to be relatively short. The ones that list the word "detachable" seem a bit longer. Try "USB3 hub detachable" in a search. https://www.newegg.com/Product/Produ...9SIA5MP7AR8593 There's no particular technical reason for these choices. They could use a 3 meter cable, at which point the dielectric properties would have to improve before the cable could be made longer. Paul |
#9
|
|||
|
|||
USB 3.0 hub question
Paul wrote:
Yes wrote: I'm thinking about buying a USB 3.0 external hub for my pc. I'm looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. Thanks, John The hubs with the captive or attached cables seem to be relatively short. The ones that list the word "detachable" seem a bit longer. Try "USB3 hub detachable" in a search. https://www.newegg.com/Product/Produ...9SIA5MP7AR8593 There's no particular technical reason for these choices. They could use a 3 meter cable, at which point the dielectric properties would have to improve before the cable could be made longer. Paul I'll check it out. The location of my pc is such that I estimate I need a cord length of 18" to 24" inches so that I can put the hub on a stable, flat surface and attach devices as needed. John |
#10
|
|||
|
|||
USB 3.0 hub question
Yes wrote:
I'm thinking about buying a USB 3.0 external hub for my pc. I'm looking for one that has about an 18 to 20 inch cable length and will use the older 3.0 USB connectors (Type A ???). Are there any hubs being made that fit those conditions? Who is making them? Get a hub that has no atached cable. Then attach a USB 3.0 cable of the length you desire at a maximum of 3 meters for a passive USB3 cable; see http://www.yourcablestore.com/USB-Ca...m_ep_42-1.html If you will be attaching more than one high-powered USB 3.0 device to the hub, make sure to get a hub that is externally powered and whose walwart is rated for N x 900 mA, where N is the number of ports on the USB hub, so each USB 3 device can have full power from the hub. If the hub has 4 ports, you want the walwart rated at 3.6 amps, or higher, for its *output* load (to the USB hub). If one of the ports is a high-amp charging port, you'll have to add its amperage (2.4 A) into what the walwart must support for the total load of all ports in use on the hub. I've seen 4-port USB 3 hubs externally powered with a 2.4A charging port but the walwart was rated only for 2A which isn't even enough for the 2.4A charging port. Without external power to the hub, the hub will only get the 0.9A load across ALL its ports from the USB 3 port into which you plug the hub. That is, all USB devices (2.0 or 3.0) will have to share the single 0.9A maximum load from the one USB port on the computer. The ones I saw at newegg look to have cords about 6 inches long. That is not long enough given where my pc is located. FWIW, my mobo does not have the onboard UsB 3.0 connector to enable using USB hubs that fit into 3.5" and 5.5 bays. To what would you be connecting the USB 3.0 hub if your computer doesn't have any USB 3.0 ports? Mobos I've seen that had USB 3.0 support had a USB 3.0 header for support of front-panel USB ports. Perhaps you have a mobo that is devoid of USB 3.0 support (it only supports USB 2.0) and you installed a daughtercard to add USB 3.0 support. That daughtercard doesn't have a USB3 header or an internal USB3 port? |
|
Thread Tools | |
Display Modes | |
|
|