If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
"Bad" RAM?
AT post this is what I see...
Phoenix AwardBIOS v 6.00PG W7030NMS V1.4082604 20:56:50 Memory information: DDR 400 Memory clock is : 200 MHZ Tcl: 3 Trcd: 2 Tras: 5 Trp: 2 ( 2T Timing). This is 2x512 Micron DDR400 RAM on an MSI K8N Neo platinum Board with an AMD 64 2800 SO, what does that tell you(me)? Anything i can adjust in bIOS? Thanks |
#2
|
|||
|
|||
what are you referring to...the clock speed? it is correct?
"Brandon" wrote in message news:xeSMd.33671$EG1.31849@lakeread04... AT post this is what I see... Phoenix AwardBIOS v 6.00PG W7030NMS V1.4082604 20:56:50 Memory information: DDR 400 Memory clock is : 200 MHZ Tcl: 3 Trcd: 2 Tras: 5 Trp: 2 ( 2T Timing). This is 2x512 Micron DDR400 RAM on an MSI K8N Neo platinum Board with an AMD 64 2800 SO, what does that tell you(me)? Anything i can adjust in bIOS? Thanks |
#3
|
|||
|
|||
Tcl: 3 Trcd: 2 Tras: 5 Trp: 2 ( 2T Timing).
"Ginchy" wrote in message ... what are you referring to...the clock speed? it is correct? "Brandon" wrote in message news:xeSMd.33671$EG1.31849@lakeread04... AT post this is what I see... Phoenix AwardBIOS v 6.00PG W7030NMS V1.4082604 20:56:50 Memory information: DDR 400 Memory clock is : 200 MHZ Tcl: 3 Trcd: 2 Tras: 5 Trp: 2 ( 2T Timing). This is 2x512 Micron DDR400 RAM on an MSI K8N Neo platinum Board with an AMD 64 2800 SO, what does that tell you(me)? Anything i can adjust in bIOS? Thanks |
Thread Tools | |
Display Modes | |
|
|