If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
HSF suggestions?
Hi,
I need cooling! just got barton 2500 and i overclocked it to 3200 with a little up in voltage. Right now im using stock cooler. What are some recommendations for a low noise decently priced hsf which will cool my chip? Right now my cpu is 49 idle and up to high 60s load!!!! thanx in advance |
#2
|
|||
|
|||
"NewUser001" wrote in message ... Hi, I need cooling! just got barton 2500 and i overclocked it to 3200 with a little up in voltage. Right now im using stock cooler. What are some recommendations for a low noise decently priced hsf which will cool my chip? Right now my cpu is 49 idle and up to high 60s load!!!! thanx in advance I'm running an XP2500 at 3200 (220x10) and I use a Vantec Aeroflow with Arctic Silver Ceramique and I get up to 49C (Prime95) depending on room temp. Only other cooling are 2x80mm case fans (exhaust) and of course the two fans in my power supply. FRH |
#3
|
|||
|
|||
I'm using a CoolerMaster Aero7+ on my 2500+ and at max RPMs I stay around
45degrees under load but I do have dual top exhausts. "Frank Hagan" wrote in message hlink.net... "NewUser001" wrote in message ... Hi, I need cooling! just got barton 2500 and i overclocked it to 3200 with a little up in voltage. Right now im using stock cooler. What are some recommendations for a low noise decently priced hsf which will cool my chip? Right now my cpu is 49 idle and up to high 60s load!!!! thanx in advance I'm running an XP2500 at 3200 (220x10) and I use a Vantec Aeroflow with Arctic Silver Ceramique and I get up to 49C (Prime95) depending on room temp. Only other cooling are 2x80mm case fans (exhaust) and of course the two fans in my power supply. FRH |
#4
|
|||
|
|||
Thermalright SLKs are supposed to be nice hsfs
On Mon, 09 Feb 2004 00:11:54 GMT, "NewUser001" wrote: :Hi, : :I need cooling! just got barton 2500 and i overclocked it to 3200 with a :little up in voltage. Right now im using stock cooler. What are some :recommendations for a low noise decently priced hsf which will cool my chip? : :Right now my cpu is 49 idle and up to high 60s load!!!! : :thanx in advance : ----- Lee. |
#5
|
|||
|
|||
"NewUser001" wrote in message
... | Hi, | | I need cooling! just got barton 2500 and i overclocked it to 3200 with a | little up in voltage. Right now im using stock cooler. What are some | recommendations for a low noise decently priced hsf which will cool my chip? | | Right now my cpu is 49 idle and up to high 60s load!!!! | | thanx in advance I am running a 2500+ @ 3200+ on 1.7 vcore (MBM reports 1.68v core) with a ThermalTake Volcano 11+ all copper hsf. My temps are 38C idle and 41C peak on cpu temp control for fan speed. Case is 25-28C. It is winter here though and the computer is in the basement. Room temp is around 20C. I had to move my computer case to the floor (on a board to allow the front vent to breath) because at peak temps it gets a little loud. Not as loud as a vacuum but enough that you notice it. My case has 1 front 80mm intake and 1 rear 80mm exhaust (and the power supply 80mm fan). The stock hsf had temps of 28C case, 31C idle, 42C peak. That little copper slug stock hsf is now in my spare parts bin. -- ttyl, CiRcUiT -=- J. Codling -=- www.jcodling.com *This message represents the official opinions of the voices in my head* |
#6
|
|||
|
|||
You don't mind the noise at max RPM ?
My Aero7+ sounds like helicopter under max RPM. David |
#7
|
|||
|
|||
lol Yes. It is loud. That combined with my two top blowholes makes for a
loud system. Just gives me an excuse to turn up the music/games. "DavidS" wrote in message ... You don't mind the noise at max RPM ? My Aero7+ sounds like helicopter under max RPM. David |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need PS to specs; suggestions? | Overlord | Overclocking | 13 | April 20th 05 07:09 PM |
Video Card Suggestions? | Grinner | General | 9 | December 29th 04 08:49 PM |
Suggestions for a good systems for graphics? | Anders O | General | 6 | November 2nd 04 05:40 PM |
Suggestions on TRUE Hardware RAID Motherboard -- EIDE or Serial ATA | Ringo Langly | General | 3 | August 13th 04 12:15 AM |
suggestions 4 building svr to host file downloads. | -|Turbosyde|- | General | 3 | September 23rd 03 07:11 PM |