If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Asus SP97-V and strange post/no post problem
I'm trying to build the following system :
Asus SP97-V AMD K6-2/400 AFQ 128MB (4x32MB) ram 200W AT psu 9.1GB+1.0GB scsi disk, scsi cd-rom Adaptec 2940 scsi card 10Mbit 3com lan etc. And to the actual problem : When I put the K6-2 in I can't get the system to post no matter what, same goes for two other processors I've tried, a 300Mhz K6-2 AFR and a 233MHz Pentium MMX. But, when I put in an old Pentium 90MHz processor the system posts and works flawlessly. All processors have been verified as working in another system. For the AMD processors and the MMX I've tried dual-plane voltages 2.1V-2.8V, FSB:s from 50 to 75MHz and most multipliers. I've tried the 01008 official, the 010905 beta and the 0109v-j2 unofficial bioses. Tried 250W ATX psu and removed all cards except video. And still the P90 is the only one that gets the system to post. Anyone know of more tricks to try? I'm already thinking that the m-b is busted somehow because all non-working processors are dual-plane and the P90 is the only single plane. Olli Meckelburg |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Strange lock-up problem. | ~misfit~ | General | 7 | September 15th 04 01:08 AM |
Strange problem... but fixed | CiRcUiT | Overclocking AMD Processors | 0 | March 7th 04 07:14 PM |
Barton 2500+ - strange overclock problem | Andrew Gowen | Overclocking AMD Processors | 22 | February 4th 04 02:08 PM |
Barton 2500+ - strange overclock problem | Andrew Gowen | Asus Motherboards | 17 | February 4th 04 02:08 PM |
strange asus motherboard/graphics card problem | Scott | Asus Motherboards | 5 | January 8th 04 02:19 PM |