If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
4000S Halt on Error
I have a 4000s I want to run without a keyboard or monitor.
Things is, on every other computer i've seen, the bios had a setting for halt on error which if set to "none" would allow the machine to boot whether keyboard or monitor was present or not. Is it possible to get one of these to be setup in a similar method? Right now it stops at the error screen "304-Keyboard or System Unit Error", and I couldnt find anything to set this in the F10 Setup. Does anyone have any suggestions? |
#2
|
|||
|
|||
Don't have first hand experience with this, but I've been told if you set a
setup password, you will then have a server mode option which should work w/o a keyboard. Let us know if it works. "ch" wrote in message ... I have a 4000s I want to run without a keyboard or monitor. Things is, on every other computer i've seen, the bios had a setting for halt on error which if set to "none" would allow the machine to boot whether keyboard or monitor was present or not. Is it possible to get one of these to be setup in a similar method? Right now it stops at the error screen "304-Keyboard or System Unit Error", and I couldnt find anything to set this in the F10 Setup. Does anyone have any suggestions? |
#3
|
|||
|
|||
"David" wrote in
link.net: Don't have first hand experience with this, but I've been told if you set a setup password, you will then have a server mode option which should work w/o a keyboard. Let us know if it works. Yes this works for the keyboard, although, if you do have a keyboard plugged in, it doesnt work.... which makes it awful difficult to get the keyboard turned back on I havent got it to boot without a monitor yet though. "ch" wrote in message ... I have a 4000s I want to run without a keyboard or monitor. Things is, on every other computer i've seen, the bios had a setting for halt on error which if set to "none" would allow the machine to boot whether keyboard or monitor was present or not. Is it possible to get one of these to be setup in a similar method? Right now it stops at the error screen "304-Keyboard or System Unit Error", and I couldnt find anything to set this in the F10 Setup. Does anyone have any suggestions? |
#4
|
|||
|
|||
Hmm.. suppose you'd have to clear the CMOS to get the keyboard back in that
case. Don't know why it won't boot w/o a monitor, that shouldn't be a problem. I guess try to disable the onboard video if this one has it. Again, I suppose you'd have to clear the CMOS or use a vid card to get it back. "ch" wrote in message ... "David" wrote in link.net: Don't have first hand experience with this, but I've been told if you set a setup password, you will then have a server mode option which should work w/o a keyboard. Let us know if it works. Yes this works for the keyboard, although, if you do have a keyboard plugged in, it doesnt work.... which makes it awful difficult to get the keyboard turned back on I havent got it to boot without a monitor yet though. "ch" wrote in message ... I have a 4000s I want to run without a keyboard or monitor. Things is, on every other computer i've seen, the bios had a setting for halt on error which if set to "none" would allow the machine to boot whether keyboard or monitor was present or not. Is it possible to get one of these to be setup in a similar method? Right now it stops at the error screen "304-Keyboard or System Unit Error", and I couldnt find anything to set this in the F10 Setup. Does anyone have any suggestions? |
#5
|
|||
|
|||
ch schrieb:
.... Yes this works for the keyboard, although, if you do have a keyboard plugged in, it doesnt work.... which makes it awful difficult to get the keyboard turned back on .... My 4000N beeps on startup, but comes up without screen. You may use a dummy plug if it doesn't work. Gereon |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A7N8X Motherboard Low Temperature Sensitivity, CMOS Checksum Error | kony | General | 6 | October 18th 04 05:38 AM |
Problems installing Nvidia drivers on SuSE Linux 9.1 with kernel2.6.7 with gcc 3.3.3 | Tamer | Nvidia Videocards | 3 | June 23rd 04 11:53 AM |
Getting a weird Promise RAID (Win XP) error with my ASUS P4C800 Deluxe | M. B. | Asus Motherboards | 5 | February 9th 04 01:19 AM |
FIC or HIS for a 9600Pro? | Phrederick | General | 8 | December 16th 03 01:17 PM |
FIC or HIS for a 9600Pro? | Phrederick | Ati Videocards | 8 | December 16th 03 01:17 PM |