If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Epson 785 EPX printing 6x4 photos from computer
Plugged in tested, etc. Tried printing a 600 dpi scan to it from photoshop. Mis aligned and wrong size. So... Tried printing the same photo fromt the Epson Software (Film Factory) and ended up with a nearly correct print, but one edge printed off of the paper (about 1/4 inch worth). The other edges (3) have a 1/4 inch border. Paper was loaded in portrait orientation, the Film Factor software showed in portrait orientation for printing (image is landscape oriented, but not an issue); and with a border. Thoughts anyone? Thanks, Alan |
#2
|
|||
|
|||
Safetymom123 wrote: Did you check the box on the paper tab under preferences for borderless printing? As I said below, only one edge printed over. The prview on the screen shows the entire image inside the border. "Alan Browne" wrote in message ... Plugged in tested, etc. Tried printing a 600 dpi scan to it from photoshop. Mis aligned and wrong size. So... Tried printing the same photo fromt the Epson Software (Film Factory) and ended up with a nearly correct print, but one edge printed off of the paper (about 1/4 inch worth). The other edges (3) have a 1/4 inch border. Paper was loaded in portrait orientation, the Film Factor software showed in portrait orientation for printing (image is landscape oriented, but not an issue); and with a border. Thoughts anyone? Thanks, Alan |
#3
|
|||
|
|||
You still don't say if you checked the box for borderless. Are you picking
the right paper type? 4x6 no perforations. "Alan Browne" wrote in message ... Safetymom123 wrote: Did you check the box on the paper tab under preferences for borderless printing? As I said below, only one edge printed over. The prview on the screen shows the entire image inside the border. "Alan Browne" wrote in message ... Plugged in tested, etc. Tried printing a 600 dpi scan to it from photoshop. Mis aligned and wrong size. So... Tried printing the same photo fromt the Epson Software (Film Factory) and ended up with a nearly correct print, but one edge printed off of the paper (about 1/4 inch worth). The other edges (3) have a 1/4 inch border. Paper was loaded in portrait orientation, the Film Factor software showed in portrait orientation for printing (image is landscape oriented, but not an issue); and with a border. Thoughts anyone? Thanks, Alan |
#4
|
|||
|
|||
Got it now. Thanks. Safetymom123 wrote: You still don't say if you checked the box for borderless. Are you picking the right paper type? 4x6 no perforations. "Alan Browne" wrote in message ... Safetymom123 wrote: Did you check the box on the paper tab under preferences for borderless printing? As I said below, only one edge printed over. The prview on the screen shows the entire image inside the border. "Alan Browne" wrote in message ... Plugged in tested, etc. Tried printing a 600 dpi scan to it from photoshop. Mis aligned and wrong size. So... Tried printing the same photo fromt the Epson Software (Film Factory) and ended up with a nearly correct print, but one edge printed off of the paper (about 1/4 inch worth). The other edges (3) have a 1/4 inch border. Paper was loaded in portrait orientation, the Film Factor software showed in portrait orientation for printing (image is landscape oriented, but not an issue); and with a border. Thoughts anyone? Thanks, Alan |
#5
|
|||
|
|||
Got it all sorted out. Thanks for your help. Cheers, Alan Safetymom123 wrote: You still don't say if you checked the box for borderless. Are you picking the right paper type? 4x6 no perforations. "Alan Browne" wrote in message ... Safetymom123 wrote: Did you check the box on the paper tab under preferences for borderless printing? As I said below, only one edge printed over. The prview on the screen shows the entire image inside the border. "Alan Browne" wrote in message ... Plugged in tested, etc. Tried printing a 600 dpi scan to it from photoshop. Mis aligned and wrong size. So... Tried printing the same photo fromt the Epson Software (Film Factory) and ended up with a nearly correct print, but one edge printed off of the paper (about 1/4 inch worth). The other edges (3) have a 1/4 inch border. Paper was loaded in portrait orientation, the Film Factor software showed in portrait orientation for printing (image is landscape oriented, but not an issue); and with a border. Thoughts anyone? Thanks, Alan |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to Fix Your Computer | Ben Dellar | Overclocking AMD Processors | 0 | November 11th 03 10:39 AM |
Epson CX5200 network printing | Rolando | Printers | 0 | August 25th 03 05:58 PM |
Epson C80 Envelope Printing | [email protected] | Printers | 3 | August 16th 03 03:00 AM |
bw-Laserprinter for printing digital photos | Wolf Kirchmeir | Printers | 5 | July 14th 03 06:18 PM |
Epson 740 color not printing (was Surely Not! Epson 600 vs i850) | R Dan Henry | Printers | 2 | July 10th 03 05:28 AM |