If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
mini pc's (Mebbe wrong group - sorry)
Hi, sorry if this is in the wrong ng (feel free to point me in the right
direction). Looking to build from scratch/bearbones or buy complete a microatx/mini pc as a MM unit to snick into hifi/TV set up. Can anyone recommend any dealers/companies that specialise with mini/micro stuff (not minipc4less.com, their attitude sucks major) atb, Viz |
#2
|
|||
|
|||
mini pc's (Mebbe wrong group - sorry)
vizpa wrote:
Hi, sorry if this is in the wrong ng (feel free to point me in the right direction). Looking to build from scratch/bearbones or buy complete a microatx/mini pc as a MM unit to snick into hifi/TV set up. Can anyone recommend any dealers/companies that specialise with mini/micro stuff (not minipc4less.com, their attitude sucks major) atb, Viz If you are building it using a micro-ATX MB then the only "special" piece of equipment you need is an appropriately small case and these are sold widely. I'm planning to build my new micro-ATX into an Apevia X-Qpack case but that's just me. If you want a case that looks more like a piece of AV equipment you might just do a google search for "small form factor cases" and check out some of the hits. A sampling of some of the styles available is shown at http://www.directron.com/cases---cas...atx-cases.html but many dealers sell the same cases. You might want to make sure that the case you choose uses a standard ATX power supply just to make things easier on yourself. Special PS units are a PITA to replace most of the time. Also, given the application you'll want to find a case that uses a quieter-than-average cooling setup. I prefer a single 120mm fan but there are other ways to go. Most PCs in this sort of application don't need to be very high-powered so the job is a bit easier. -- John McGaw [Knoxville, TN, USA] http://johnmcgaw.com |
#3
|
|||
|
|||
mini pc's (Mebbe wrong group - sorry)
vizpa wrote:
Hi, sorry if this is in the wrong ng (feel free to point me in the right direction). Looking to build from scratch/bearbones or buy complete a microatx/mini pc as a MM unit to snick into hifi/TV set up. Can anyone recommend any dealers/companies that specialise with mini/micro stuff (not minipc4less.com, their attitude sucks major) You will probably get better results on comp.arch.embe4dded. -- http://www.cs.auckland.ac.nz/~pgut001/pubs/vista_cost.txt http://www.securityfocus.com/columnists/423 http://www.aaxnet.com/editor/edit043.html cbfalconer at maineline dot net -- Posted via a free Usenet account from http://www.teranews.com |
#4
|
|||
|
|||
mini pc's (Mebbe wrong group - sorry)
vizpa wrote:
Hi, sorry if this is in the wrong ng (feel free to point me in the right direction). Looking to build from scratch/bearbones or buy complete a microatx/mini pc as a MM unit to snick into hifi/TV set up. Can anyone recommend any dealers/companies that specialise with mini/micro stuff (not minipc4less.com, their attitude sucks major) atb, Viz The following are examples of Intel processor and AMD processor motherboards. They've got a few connectors on the back, which would help with a home theater setup. ABIT Fatal1ty F-I90HD LGA 775 ATI Radeon Xpress 1250 Micro ATX Intel Motherboard $115 http://images10.newegg.com/NeweggIma...127-023-03.jpg There are a bunch of 690G boards on Newegg as well. This one uses an adapter that plugs into the PCI Express x16, to offer an HDMI connector and a component video capability. Not very convenient though, because the adapter is full height, and not a low profile card. ASUS M2A-VM HDMI Socket AM2 AMD 690G uATX AMD Motherboard $79 http://www.newegg.com/Product/Produc...82E16813131174 The Asus board with HDMI adapter, is also available as a barebones product. The motherboard in this one appears to be the same M2A-VM HDMI AMD board. ASUS V3-M2A690G $150 http://images10.newegg.com/NeweggIma...110-077-15.jpg The reviews for that barebones are real handy, telling potential customers how to fix it :-) They mention "no manual", which is a cardinal sin. To enable HDMI apparently required a "forced flash" of the BIOS. (I.e. Wrong BIOS, a non-HDMI one, installed at the factory.) http://www.newegg.com/Product/Produc...82E16856110077 I don't know if any of those have HDCP (support for HD encrypted for DRM). If you were playing High Definition content, you'd want a decent processor for that. With the state of hardware support for multimedia content, acceleration is kinda thin in most products. Nvidia's latest generation of video cards, has accelerated more of the playback process, meaning the CPU has to do less work. But to handle any situation, with any kind of movie, I'd still want a decent processor in there. Not all encodings are accelerated to the same degree. If, on the other hand, the box is only doing SD (standard definition), then you could use a cheaper processor. There are a few reviews around, that compare the computing requirements. This one is an example. A bit more than a "3GHz P4 equivalent" might help with playback of some types of HD content, if the acceleration characteristics of the GPU solution are unknown. http://www.anandtech.com/video/showdoc.aspx?i=2977&p=4 If you wanted a product that looked like stereo equipment (low profile), you might have to work a lot harder at this project. Or be prepared to shell out a lot of money. If you are willing to accept an ugly case or form factor, you could save a few dollars. Also note, that one of the liabilities of a bare bones or a small form factor computer, is getting spare parts later. Say for example, the custom power supply fails. At that point, you may have to repackage the hardware, in which case all components inside the computer had better fit in an ATX case. So a hardware failure in the bare bones computer, can be a PITA to clean up. And since nobody makes really reliable gear, expect something to fail. Some barebones have custom coolers for the CPU, and a fan failure there can be a problem as well. Shuttle is popular with some people, but the price of this stuff can be a lot higher. http://us.shuttle.com/G5_3300m.aspx Paul |
#5
|
|||
|
|||
To those that replied (was: mini pc's (Mebbe wrong group - sorry)
Hi, just wanted to say a big thanks to all of you who took the time out to
answer. I wanted to say more, but I'm only just out of hospital after some idiot ran a red light and slammed his suv into me at 60mph. I'm all plastered up and can hardly type. please accept this as my reply. Vez |
#6
|
|||
|
|||
To those that replied (was: mini pc's (Mebbe wrong group - sorry)
vizpa wrote:
Hi, just wanted to say a big thanks to all of you who took the time out to answer. I wanted to say more, but I'm only just out of hospital after some idiot ran a red light and slammed his suv into me at 60mph. I'm all plastered up and can hardly type. please accept this as my reply. The "mini pc" in the "was" sounds vaguely familiar. Don't worry about it. Get better, and sue the bejasus out of the idiot. Then come back. -- http://www.cs.auckland.ac.nz/~pgut001/pubs/vista_cost.txt http://www.securityfocus.com/columnists/423 http://www.aaxnet.com/editor/edit043.html cbfalconer at maineline dot net -- Posted via a free Usenet account from http://www.teranews.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
portable player (wrong group perhaps?) | Zed Rafi | General | 0 | November 29th 05 07:58 PM |
Wrong Group, but Mayb you kno.. | rstlne | AMD x86-64 Processors | 5 | March 23rd 05 10:26 AM |
Wrong group...I know... | S. R. Sheffield | Dell Computers | 4 | December 31st 04 10:58 PM |