If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help needed: problem installing XP on new system
I seriously need help as I'm completely clueless as to what's the problem...
Problem: My friend wanted me to look at his computer as it looked like it had gone, which it was. Got new hard drive (Maxtor 40GB Fireball 3 5400RPM) and tried to install it. Turns out that the motherboard seemed to have gone as well. Suggested he get a basic system without hard drive and I would fit hard drive and his CD writer and DVD rom to the new system. Got case, motherboard (ECS / ASROCK M810LMR) chip (Duron 1600 mhz) all assembled and I put in hard drive, CD and DVD drives. Pretty straightforward so far... Set computer to boot from CD, Stuck in the XP CD, get to the "press a key to boot from cd" and try to format the harddrive to NTFS. The formatting gets to 100% then a new page comes up with the message "Setup was unable to format the partition. The disk may be damaged". Odd I thought as it was a brand new hard drive. Tried again but this time doing a quick NTFS format. Seemed to get through that OK, then it started to copy files from CD, then got a message "could not find xxx file" (or something). Tried this a few times and the file which it stopped at seemed to be random. Maybe it was the CD, I thought... Attached the hard drive to my own PC, stuck in the XP disk, hard drive formatted and installed XP first time, no probelms at all. Stuck the hard drive in the other PC and it got to the xp loading screen then came up with a bunch of errors about configuration and settings (sorry can't be more specific) which was fair enough as the computer has different motherboard, processor etc. to mine. Tried to reinstall XP and came across same problems as before again. Thought maybe it was the IDE cable which was taken from my friend's old PC... Stuck a new IDE cable in, same problems... Thought it was something to do with the CD or DVD drive, so put MY CD drive (which installed XP onto my PC) into the new PC (whilst removing the other CD and DVD drive), same problems. Also tried it with the CD IDE cable from my PC too, still no luck. There are other weird things happening as well. Computer hangs at random places during startup e.g. when the message comes up to press a key to boot from CD. If it gets passed this point and it starts to load files to initialise the installation (before it tries to format drive) sometimes it hangs here, or I sometimes get messages saying "The file xxx could not be found". Basically the problems seem to happen on a random basis and it just seems luck that it gets to the formatting stage. I'm at a standstill as to what to try next. Somethings I've noticed during this: If I enter BIOS setup (pressing F2) and set the floppy drive and the CD as the only bootable items, then upon reboot enter the boot menu (pressing F11) it lists the bootable times, Floppy: 1.44 floppy drive, Hard drive: Maxtor..., CD: blank, like its not recognising the CD drive, but the PC does auto detect the CD at startup. Could it be a settings conflict between hard drive and CD drive? and if so how would i fix this? Also, I should mention, I downloaded a hard drive checking utility from the Maxtor site, and ran this with the hard drive in the new PC and it came up with no problems on the hard drive, and I also performed a low level format on the drive, but still didn't fix things. Any help would be greatly appreciated. If anyone manages to sort this, they are a genius. thanks G.J. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
This problem has baffled everyone... | Nick G | General | 46 | May 22nd 04 04:01 AM |
Scanning a problem after Installing XP. | Karolus des Reyches197 | General | 8 | January 8th 04 03:39 AM |
New system power-up problem! | PhilM | General | 10 | December 22nd 03 07:22 PM |
Multi-boot Windows XP without special software | Timothy Daniels | General | 11 | December 12th 03 05:38 AM |
problem installing Diamond AGP card | net | General | 17 | October 16th 03 12:17 AM |