OC A7N8X-E

I have the A7N8X-E M/B and Sempron 2500+. It runns @ 166FSB * 10.5 to get
1750Mhz. I tried to rasie the FSB to 200 but it craps out and freezes. My
memory is 2x512MB DDR400 PC3200 to makge 1GB of ram. Iwant to OC this to
200FSB.
What are the bios settings I have to change to beable to do this. Voltage
and memory settings, etc etc.
Anyone who knows this board please reply.

Hugh

Hugh wrote:
I have the A7N8X-E M/B and Sempron 2500+. It runns @ 166FSB * 10.5 to get
1750Mhz. I tried to rasie the FSB to 200 but it craps out and freezes. My
memory is 2x512MB DDR400 PC3200 to makge 1GB of ram. Iwant to OC this to
200FSB.
What are the bios settings I have to change to beable to do this. Voltage
and memory settings, etc etc.
Anyone who knows this board please reply.

Hugh


Hi Hugh
I think that you forgot when you higher your busspeed the AGP ans pci
speed gets faster as well.You have to look at your agp speed in the bios
and put it down to 66.The pci bus gets the right speed as well by doing
that as they are connected.About the voltage and the memory settings You
could leave it at default and maybe if it's not go error free increase
the cpu core setting with one step and not any more.That should be ok
At the end I have no idea how that processor are when it comes to
o.clocking but good luck.
regards al