If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
XP2600+ runs at 913mhz
I have an XP2700+ cpu and a XP2600+ and 2 MB one is a MSI KT8 Ultra
and the Other is a FIC AU13 The 2700 is recognized and properly set up in both boards but the 2600 always sets up at 166x5.5 913MHZ Bothe MB say they will run the 2600. I tried to manually set the FSB and multiplier but it just wont run right at anything faster. t comes up with CPU overrunning. The slowest FSB is 100 and multiplier is 5 on both computers. Can some one help? |
#2
|
|||
|
|||
XP2600+ runs at 913mhz
On Tue, 01 Jan 2008 00:17:03 -0600, Klyde Beaty wrote:
I have an XP2700+ cpu and a XP2600+ and 2 MB one is a MSI KT8 Ultra and the Other is a FIC AU13 The 2700 is recognized and properly set up in both boards but the 2600 always sets up at 166x5.5 913MHZ Bothe MB say they will run the 2600. I tried to manually set the FSB and multiplier but it just wont run right at anything faster. t comes up with CPU overrunning. The slowest FSB is 100 and multiplier is 5 on both computers. Can some one help? My guess is you got your hands on a 2600+ XP-M (mobile 2600). Nothing wrong with that other than you may have to do a little work to get it running properly. Come back with the part number (first line of label), and stepping and date code (last line). Also include make an model of MB's you have. I thought the KT8 was for a K8 (Ahtlon 64) cpu. All XP's are K7 afaik. -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org My Tivo Experience http://wesnewell.no-ip.com/tivo.htm Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm AMD cpu help http://wesnewell.no-ip.com/cpu.php |
#3
|
|||
|
|||
XP2600+ runs at 913mhz
Wes:
Here is all the numbers I can find on it. On the black Label AMD Athlon AXDA2600KV4D Q335616L40159 AQYHA0447BPMW 1999 AMD Silk screened in metal on green top 27493 On white label 19103417/523925 Nothing readable on the actual chip. Thank you Wes Newell wrote: On Tue, 01 Jan 2008 00:17:03 -0600, Klyde Beaty wrote: I have an XP2700+ cpu and a XP2600+ and 2 MB one is a MSI KT8 Ultra and the Other is a FIC AU13 The 2700 is recognized and properly set up in both boards but the 2600 always sets up at 166x5.5 913MHZ Bothe MB say they will run the 2600. I tried to manually set the FSB and multiplier but it just wont run right at anything faster. t comes up with CPU overrunning. The slowest FSB is 100 and multiplier is 5 on both computers. Can some one help? My guess is you got your hands on a 2600+ XP-M (mobile 2600). Nothing wrong with that other than you may have to do a little work to get it running properly. Come back with the part number (first line of label), and stepping and date code (last line). Also include make an model of MB's you have. I thought the KT8 was for a K8 (Ahtlon 64) cpu. All XP's are K7 afaik. |
#4
|
|||
|
|||
XP2600+ runs at 913mhz
Sorry I forgot the MB specs.
one is FIC AU13 and the other is MSI KT3 Ultra not KT8 Klyde Beaty wrote: Wes: Here is all the numbers I can find on it. On the black Label AMD Athlon AXDA2600KV4D Q335616L40159 AQYHA0447BPMW 1999 AMD Silk screened in metal on green top 27493 On white label 19103417/523925 Nothing readable on the actual chip. Thank you Wes Newell wrote: On Tue, 01 Jan 2008 00:17:03 -0600, Klyde Beaty wrote: I have an XP2700+ cpu and a XP2600+ and 2 MB one is a MSI KT8 Ultra and the Other is a FIC AU13 The 2700 is recognized and properly set up in both boards but the 2600 always sets up at 166x5.5 913MHZ Bothe MB say they will run the 2600. I tried to manually set the FSB and multiplier but it just wont run right at anything faster. t comes up with CPU overrunning. The slowest FSB is 100 and multiplier is 5 on both computers. Can some one help? My guess is you got your hands on a 2600+ XP-M (mobile 2600). Nothing wrong with that other than you may have to do a little work to get it running properly. Come back with the part number (first line of label), and stepping and date code (last line). Also include make an model of MB's you have. I thought the KT8 was for a K8 (Ahtlon 64) cpu. All XP's are K7 afaik. |
#5
|
|||
|
|||
XP2600+ runs at 913mhz
On Tue, 01 Jan 2008 16:09:43 -0600, Klyde Beaty wrote:
Sorry I forgot the MB specs. one is FIC AU13 and the other is MSI KT3 Ultra not KT8 Both should support this cpu. AXDA2600KV4D Q335616L40159 I'll assume that an AXDA2600DKV4D. Standard XP with 512K cache (Barton core) and default 166MHz FSB (333FSB). See this link for more info on the numbers. http://www.amdboard.com/amdid.html AQYHA0447BPMW 1999 AMD Date code of 0447 means it's probably multiplier locked. Default multiplier is 11.5x166MHz (333FSB). Try setting the the FSB to 166 and the multiplier to 11.5. If your bios has a divider setting for the PCI/AGP bus the pci divider should be set to 5 to get the nominal 33.33MHz PCI bus. Sometimes that shown as 5:2:1 meaning FSB/5 for PCI, PCI x2 for agp, and memory running 1:1. Voltage should be at default 1.65v. It shouldn't have a problem working in either of these boards unless it's defective or someone has messed up some of the bridges on top. Did you buy this new? Or you sure the top is clean of any "silver" grease? Did you reset the bios and try it? That's about all I can think of. Good luck. I have an XP2700+ cpu and a XP2600+ and 2 MB one is a MSI KT8 Ultra and the Other is a FIC AU13 The 2700 is recognized and properly set up in both boards but the 2600 always sets up at 166x5.5 913MHZ Bothe MB say they will run the 2600. I tried to manually set the FSB and multiplier but it just wont run right at anything faster. t comes up with CPU overrunning. The slowest FSB is 100 and multiplier is 5 on both computers. Can some one help? -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org My Tivo Experience http://wesnewell.no-ip.com/tivo.htm Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm AMD cpu help http://wesnewell.no-ip.com/cpu.php |
#6
|
|||
|
|||
XP2600+ runs at 913mhz
Wes :
I tried what you said but can't set the agp except to 50mhz which is the slowest, the FSB to 166 and multiplier to 11.5 the voltage is 1.65. I remember ordering it especially for the Barton core but the MB I had it in died. Neither of the MB I have now will rune it when I make the changes it always reverts back to 100mhz x 5.5. I guess Ill look a 2600 on Ebay and sell this one maby I can break even. If I could get a cpu and board that didnt need DDR2 memory and a pci video card I would just upgrade, but its the wifes for embroidery programs and she doesn't need much. Actually running at 900mhz she doesn't know the difference. Thanks Newell wrote: On Tue, 01 Jan 2008 16:09:43 -0600, Klyde Beaty wrote: Sorry I forgot the MB specs. one is FIC AU13 and the other is MSI KT3 Ultra not KT8 Both should support this cpu. AXDA2600KV4D Q335616L40159 I'll assume that an AXDA2600DKV4D. Standard XP with 512K cache (Barton core) and default 166MHz FSB (333FSB). See this link for more info on the numbers. http://www.amdboard.com/amdid.html AQYHA0447BPMW 1999 AMD Date code of 0447 means it's probably multiplier locked. Default multiplier is 11.5x166MHz (333FSB). Try setting the the FSB to 166 and the multiplier to 11.5. If your bios has a divider setting for the PCI/AGP bus the pci divider should be set to 5 to get the nominal 33.33MHz PCI bus. Sometimes that shown as 5:2:1 meaning FSB/5 for PCI, PCI x2 for agp, and memory running 1:1. Voltage should be at default 1.65v. It shouldn't have a problem working in either of these boards unless it's defective or someone has messed up some of the bridges on top. Did you buy this new? Or you sure the top is clean of any "silver" grease? Did you reset the bios and try it? That's about all I can think of. Good luck. I have an XP2700+ cpu and a XP2600+ and 2 MB one is a MSI KT8 Ultra and the Other is a FIC AU13 The 2700 is recognized and properly set up in both boards but the 2600 always sets up at 166x5.5 913MHZ Bothe MB say they will run the 2600. I tried to manually set the FSB and multiplier but it just wont run right at anything faster. t comes up with CPU overrunning. The slowest FSB is 100 and multiplier is 5 on both computers. Can some one help? |
#7
|
|||
|
|||
XP2600+ runs at 913mhz
On Tue, 01 Jan 2008 20:37:24 -0600, Klyde Beaty wrote:
Wes : I tried what you said but can't set the agp except to 50mhz which is the slowest, the FSB to 166 and multiplier to 11.5 the voltage is 1.65. I remember ordering it especially for the Barton core but the MB I had it in died. Neither of the MB I have now will rune it when I make the changes it always reverts back to 100mhz x 5.5. I guess Ill look a 2600 on Ebay and sell this one maby I can break even. If I could get a cpu and board that didnt need DDR2 memory and a pci video card I would just upgrade, but its the wifes for embroidery programs and she doesn't need much. Actually running at 900mhz she doesn't know the difference. The nominal AGP bus speed is 66MHz, 2 times the PCI speed of 33MHz. If it's defaulting to the same thing in both boards I'd say something was wrong with it as a guess. I assume the 2700+ you have is also a barton core running at 166MHz. I'd still check the L6 bridges and see if someone accidentally or on purpose change the mobile bridge. This place covers everything about the cpu. http://fab51.com/cpu/barton/athlon-e23.html -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org My Tivo Experience http://wesnewell.no-ip.com/tivo.htm Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm AMD cpu help http://wesnewell.no-ip.com/cpu.php |
#8
|
|||
|
|||
XP2600+ runs at 913mhz
Wes:
Thanks for your help and link. This CPU was purchased by me new, so it hasnt been screwed with. It did work on the last MB I had it in, that Has now gone by by. Yes the 2700 is also a Barton. Larry Wes Newell wrote: On Tue, 01 Jan 2008 20:37:24 -0600, Klyde Beaty wrote: Wes : I tried what you said but can't set the agp except to 50mhz which is the slowest, the FSB to 166 and multiplier to 11.5 the voltage is 1.65. I remember ordering it especially for the Barton core but the MB I had it in died. Neither of the MB I have now will rune it when I make the changes it always reverts back to 100mhz x 5.5. I guess Ill look a 2600 on Ebay and sell this one maby I can break even. If I could get a cpu and board that didnt need DDR2 memory and a pci video card I would just upgrade, but its the wifes for embroidery programs and she doesn't need much. Actually running at 900mhz she doesn't know the difference. The nominal AGP bus speed is 66MHz, 2 times the PCI speed of 33MHz. If it's defaulting to the same thing in both boards I'd say something was wrong with it as a guess. I assume the 2700+ you have is also a barton core running at 166MHz. I'd still check the L6 bridges and see if someone accidentally or on purpose change the mobile bridge. This place covers everything about the cpu. http://fab51.com/cpu/barton/athlon-e23.html |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FEAR runs crappy, Quake runs fine | JB | Homebuilt PC's | 30 | December 19th 05 04:55 PM |
How old is this new xp2600 i just got? | Jason Walker | Overclocking AMD Processors | 5 | June 8th 04 03:03 AM |
XP2600 - which FSB?? | Thomas Popple | Overclocking AMD Processors | 3 | April 21st 04 10:50 PM |
Motherbrd for a XP2600????? | JSW | Homebuilt PC's | 5 | September 3rd 03 01:07 PM |
HS/F for an XP2600+? | Tin-Char D'un | Overclocking AMD Processors | 2 | June 25th 03 01:39 PM |