If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Dell Precision 210...Can't get the plastic case OFF
Mabe I'm just getting old but I can not figure this out. I can pull the memory just by reaching inside but also I want to pull the 550mhz CPU. there is a lot of space to reach inside after I removed the metal IDE hard drive box. can I pull out the CPU just by reaching inside? Thanks for any help. |
#2
|
|||
|
|||
Dell Precision 210...Can't get the plastic case OFF
"fadeToblack" wrote in message ... Mabe I'm just getting old but I can not figure this out. I can pull the memory just by reaching inside but also I want to pull the 550mhz CPU. there is a lot of space to reach inside after I removed the metal IDE hard drive box. can I pull out the CPU just by reaching inside? Thanks for any help. Here you go: http://support.dell.com/support/edoc...k/removing.htm Stew |
#3
|
|||
|
|||
Dell Precision 210...Can't get the plastic case OFF
On Jan 7, 6:17 pm, "S.Lewis" wrote:
"fadeToblack" wrote in message ... Mabe I'm just getting old but I can not figure this out. I can pull the memory just by reaching inside but also I want to pull the 550mhz CPU. there is a lot of space to reach inside after I removed the metal IDE hard drive box. can I pull out the CPU just by reaching inside? Thanks for any help. Here you go: http://support.dell.com/support/edoc...k/removing.htm Stew ok great info thanks Stew! BTW, is there anyway I can bypass the Administrator-password login? hitting 'Escape' did not work. |
#4
|
|||
|
|||
Dell Precision 210...Can't get the plastic case OFF
"fadeToblack" wrote in message ... On Jan 7, 6:17 pm, "S.Lewis" wrote: "fadeToblack" wrote in message ... Mabe I'm just getting old but I can not figure this out. I can pull the memory just by reaching inside but also I want to pull the 550mhz CPU. there is a lot of space to reach inside after I removed the metal IDE hard drive box. can I pull out the CPU just by reaching inside? Thanks for any help. Here you go: http://support.dell.com/support/edoc...k/removing.htm Stew ok great info thanks Stew! BTW, is there anyway I can bypass the Administrator-password login? hitting 'Escape' did not work. Check the documentation under 'jumper' settings. It can probably be cleared by temporarily moving one or more jumpers. |
#5
|
|||
|
|||
Dell Precision 210...Can't get the plastic case OFF
th admin password for windows?? just reinstall windows.
if you cant, you can boot of a cd that will reset it.... they are out there. WSZsr wrote: Stew, don't think that will that remove the Windows password? "S.Lewis" wrote in message . .. ok great info thanks Stew! BTW, is there anyway I can bypass the Administrator-password login? hitting 'Escape' did not work. Check the documentation under 'jumper' settings. It can probably be cleared by temporarily moving one or more jumpers. |
#6
|
|||
|
|||
Dell Precision 210...Can't get the plastic case OFF
"WSZsr" wrote in message ... Stew, don't think that will that remove the Windows password? I thought he meant the admin/supervisor BIOS password. Of course, if he meant Windows, then you and Jay are right........he's just better off wiping it. |
#7
|
|||
|
|||
Dell Precision 210...Can't get the plastic case OFF
"WSZsr" wrote in message ... I'm not sure now what he meant! I've already inadvertently blown up one thread, howzabout I not make it two? |
#8
|
|||
|
|||
Dell Precision 210...Can't get the plastic case OFF
On Jan 8, 8:39 am, "S.Lewis" wrote:
"WSZsr" wrote in message ... Stew, don't think that will that remove the Windows password? I thought he meant the admin/supervisor BIOS password. Of course, if he meant Windows, then you and Jay are right........he's just better off wiping it. yes I meant the windows password for Windows Server 2003 Enterprise Ed. This is the first server I've worked with and since I got it for $5 at Goodwill I'd like to get it up and running just to use it as a basic PC. I think there is a problem with the Seagate Cheetah ST39103LW SCSI 68 Pin. I tryed to wipe it but FDISK can't find it as drive 0, 1, C, etc. The 12 pin socket (in between the 68 pin and large 4 pin) was not connected to anything. I will buy a new HD but do I need a Ultra-Wide SCSI and do I have to get the faster 10k rpm and will this all work with plain old Win98? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
650 motherboard in 530 precision case? | dipa | Dell Computers | 0 | January 29th 07 06:16 AM |
I need two rear plastic case parts, hp 4000 or 4050...illustrated | dave | Printers | 6 | February 10th 06 05:50 AM |
best glue for fixing the plastic DELL crap ...? | David | Dell Computers | 33 | April 5th 05 11:03 AM |
Where do I buy those plastic push-pins, used to mount case fans? | Dave | Homebuilt PC's | 0 | August 19th 04 11:36 PM |
Dell Precision 410 fan | aurgathor | Dell Computers | 4 | July 27th 03 01:28 AM |