If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
prob moviing deskpro mobo in Aopen case
Hello,
I want to move my Compaq 06C4h deskpro motherboard in a ATX Aopen case. Problem is that on the compaq case there's only 1 cable to connect the power switch, reset switch, power led and HD led but in the Aopen case these are 4 different small cables wich connect the front case with the moterhboard. Unfortunately there's no documentation available in the manual about wich of the 10 pins on the mobo are for wich specific cable-connection wich looks like this: OOOOOOOOO OOOOOOOOO Does anybody in this ng know the specific pins for this compaq mobo or perhaps this is a general issue? kind regards, rmc PS Below is a detailed overview of my system gathered with siw.exe. Manufacturer: Compaq Chassis: Desktop DMI Version: 2.3 BIOS Version: COMPAQ - 20010612 Version: 686P0 v2.04 Motherboard Manufacturer: Compaq Model : 06C4h Serial Number: 8140FR4Z0BS5 CPU socket: XU1 Max CPU speed: 2300 MHz Processor Upgrade: ZIF Socket |
#2
|
|||
|
|||
I've done something similar, but in reverse, installing an Intel microATX board
in a Compaq Presario ATX case. The easiest thing to do is to CAREFULLY remove the integrated single front panel wiring harness from the Compaq case, then trace the connections of the lights and buttons according to the colors of the wire leads. For the most part, Compaq does not provide details of front panel wiring headers on its motherboards, so you have to figure it out yourself. And, they are not necessarily the same among all Compaqs... Ben Myers On Sun, 14 Aug 2005 23:33:53 +0200, rmc wrote: Hello, I want to move my Compaq 06C4h deskpro motherboard in a ATX Aopen case. Problem is that on the compaq case there's only 1 cable to connect the power switch, reset switch, power led and HD led but in the Aopen case these are 4 different small cables wich connect the front case with the moterhboard. Unfortunately there's no documentation available in the manual about wich of the 10 pins on the mobo are for wich specific cable-connection wich looks like this: OOOOOOOOO OOOOOOOOO Does anybody in this ng know the specific pins for this compaq mobo or perhaps this is a general issue? kind regards, rmc PS Below is a detailed overview of my system gathered with siw.exe. Manufacturer: Compaq Chassis: Desktop DMI Version: 2.3 BIOS Version: COMPAQ - 20010612 Version: 686P0 v2.04 Motherboard Manufacturer: Compaq Model : 06C4h Serial Number: 8140FR4Z0BS5 CPU socket: XU1 Max CPU speed: 2300 MHz Processor Upgrade: ZIF Socket |
#3
|
|||
|
|||
Ben Myers schreef:
I've done something similar, but in reverse, installing an Intel microATX board in a Compaq Presario ATX case. The easiest thing to do is to CAREFULLY remove the integrated single front panel wiring harness from the Compaq case, then trace the connections of the lights and buttons according to the colors of the wire leads. For the most part, Compaq does not provide details of front panel wiring headers on its motherboards, so you have to figure it out yourself. And, they are not necessarily the same among all Compaqs... Ben Myers On Sun, 14 Aug 2005 23:33:53 +0200, rmc wrote: Hello, I want to move my Compaq 06C4h deskpro motherboard in a ATX Aopen case. Problem is that on the compaq case there's only 1 cable to connect the power switch, reset switch, power led and HD led but in the Aopen case these are 4 different small cables wich connect the front case with the moterhboard. Unfortunately there's no documentation available in tthanks for the advice Ben, it works!wich of the 10 pins on the mobo are for wich specific cable-connection wich looks like this: OOOOOOOOO OOOOOOOOO Does anybody in this ng know the specific pins for this compaq mobo or perhaps this is a general issue? kind regards, rmc PS Below is a detailed overview of my system gathered with siw.exe. Manufacturer: Compaq Chassis: Desktop DMI Version: 2.3 BIOS Version: COMPAQ - 20010612 Version: 686P0 v2.04 Motherboard Manufacturer: Compaq Model : 06C4h Serial Number: 8140FR4Z0BS5 CPU socket: XU1 Max CPU speed: 2300 MHz Processor Upgrade: ZIF Socket |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best Athlon MoBo for Full Sized Tower with Temperature Sensor and Case | [email protected] | General | 3 | February 21st 05 01:30 AM |
AOpen A600 Aluminum ATX Case anyone got one need some reviews. | We Live for the One we Die for the One | Ati Videocards | 0 | May 23rd 04 07:41 AM |
AOpen A600 Aluminum ATX Case anyone got one need some reviews. | We Live for the One we Die for the One | Abit Motherboards | 0 | May 23rd 04 07:35 AM |
"Power On" problem with new mobo & case | Joel | General Hardware | 1 | April 28th 04 11:36 PM |
Cooling Questions | Peter Cavan | General | 35 | September 2nd 03 06:42 AM |