A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Compaq Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

compaq 1700



 
 
Thread Tools Display Modes
  #1  
Old February 20th 04, 05:19 AM
eddie
external usenet poster
 
Posts: n/a
Default compaq 1700

Recently purchased a Compaq 1700 Presario laptop used. When went to Compaq
site to look up information on unit since came without books etc. there are
multiple models listed. Unit has a 900 MHz Pentium III processor and win
98se running with 256 of ram and a 6 gig hd cannot read model or sn on tag
on bottom. does anyone have any suggestions thanks
Eddie


  #2  
Old February 20th 04, 10:32 AM
HH
external usenet poster
 
Posts: n/a
Default

I see no models of any 1700 series that match those specs. Closest are some
of the lower number 17XL series. Try running Compaq Diags for Windows from
Control Panel. You should see the serial number there. The S/N has a
4-letter config code in the middle. Post that and I can find your original
model number.
HH

"eddie" wrote in message
...
Recently purchased a Compaq 1700 Presario laptop used. When went to

Compaq
site to look up information on unit since came without books etc. there

are
multiple models listed. Unit has a 900 MHz Pentium III processor and win
98se running with 256 of ram and a 6 gig hd cannot read model or sn on tag
on bottom. does anyone have any suggestions thanks
Eddie




  #3  
Old February 23rd 04, 03:22 AM
eddie
external usenet poster
 
Posts: n/a
Default

serial number as follows on system did make one mistake this is a 500 MHz
pIII not 900
sn 5y05fhr5v939
thanks for the help
Eddie

"HH" wrote in message
. net...
I see no models of any 1700 series that match those specs. Closest are

some
of the lower number 17XL series. Try running Compaq Diags for Windows from
Control Panel. You should see the serial number there. The S/N has a
4-letter config code in the middle. Post that and I can find your original
model number.
HH

"eddie" wrote in message
...
Recently purchased a Compaq 1700 Presario laptop used. When went to

Compaq
site to look up information on unit since came without books etc. there

are
multiple models listed. Unit has a 900 MHz Pentium III processor and win
98se running with 256 of ram and a 6 gig hd cannot read model or sn on

tag
on bottom. does anyone have any suggestions thanks
Eddie






  #4  
Old February 23rd 04, 11:15 AM
HH
external usenet poster
 
Posts: n/a
Default

Looks like you have a 17XL260 that the original owner upgraded mrmory from
64 to 256MB.
A Maintenance & Service Guide can be found he

http://h18000.www1.hp.com/athome/sup...00XL/index.pdf

You must have Adobe Acrobat reader installed to view it.

Docs and info are he

http://h20015.www2.hp.com/hub_search...&lang=en&cc=us

Drivers/software are here

http://h20015.www2.hp.com/hub_search...&lang=en&cc=us

Hope the info helps
HH



"eddie" wrote in message
...
serial number as follows on system did make one mistake this is a 500 MHz
pIII not 900
sn 5y05fhr5v939
thanks for the help
Eddie

"HH" wrote in message
. net...
I see no models of any 1700 series that match those specs. Closest are

some
of the lower number 17XL series. Try running Compaq Diags for Windows

from
Control Panel. You should see the serial number there. The S/N has a
4-letter config code in the middle. Post that and I can find your

original
model number.
HH

"eddie" wrote in message
...
Recently purchased a Compaq 1700 Presario laptop used. When went to

Compaq
site to look up information on unit since came without books etc.

there
are
multiple models listed. Unit has a 900 MHz Pentium III processor and

win
98se running with 256 of ram and a 6 gig hd cannot read model or sn on

tag
on bottom. does anyone have any suggestions thanks
Eddie








  #5  
Old February 23rd 04, 09:31 PM
eddie
external usenet poster
 
Posts: n/a
Default

thanks for the info
Eddie

"HH" wrote in message
. net...
Looks like you have a 17XL260 that the original owner upgraded mrmory from
64 to 256MB.
A Maintenance & Service Guide can be found he

http://h18000.www1.hp.com/athome/sup...00XL/index.pdf

You must have Adobe Acrobat reader installed to view it.

Docs and info are he


http://h20015.www2.hp.com/hub_search...ype=compaqpres
95334&submit.y=9&submit.x=4&lang=en&cc=us

Drivers/software are here


http://h20015.www2.hp.com/hub_search...n&pagetype=sof
tware&prodId=compaqpres95334&sw_lang=en&submit.y=6 &submit.x=9&lang=en&cc=us

Hope the info helps
HH



"eddie" wrote in message
...
serial number as follows on system did make one mistake this is a 500

MHz
pIII not 900
sn 5y05fhr5v939
thanks for the help
Eddie

"HH" wrote in message
. net...
I see no models of any 1700 series that match those specs. Closest are

some
of the lower number 17XL series. Try running Compaq Diags for Windows

from
Control Panel. You should see the serial number there. The S/N has a
4-letter config code in the middle. Post that and I can find your

original
model number.
HH

"eddie" wrote in message
...
Recently purchased a Compaq 1700 Presario laptop used. When went to
Compaq
site to look up information on unit since came without books etc.

there
are
multiple models listed. Unit has a 900 MHz Pentium III processor and

win
98se running with 256 of ram and a 6 gig hd cannot read model or sn

on
tag
on bottom. does anyone have any suggestions thanks
Eddie










 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compaq FAQ (New Link included) HH Compaq Computers 0 January 24th 04 01:34 PM
Compaq FAQ HH Compaq Computers 0 January 20th 04 12:23 PM
Compaq ready to go Jazzy Ban Compaq Computers 0 October 14th 03 02:54 PM
Compaq Armada 1700 Sound Card problems Boonerj Compaq Computers 2 September 5th 03 02:31 AM
Compaq FAQ HH Compaq Computers 0 August 7th 03 04:22 PM


All times are GMT +1. The time now is 11:55 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.