If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WTF Proliant and SP4 = Death
Got the service Pack crap SP4 on a Windows 2000 server
had the BSOD cycle until I found it was the Network Cards..(both) causing it.. If I boot in Safe Mode and disable then boot, activate on of the cards, then reboot its OK for a few hours or min.. than crashes again this is a Proliant ML 530 with a 100 and a Gig card.. if I disable the cards the Servers stable.. I have tried reinstalling the cards, moving the cards, upgrading the drivers, reinstalling SP4... all 111 hotfixes yet all to no avail.. Still BSOD's with KMODE, and a few others like IRP, and stack errors The server is a DC, what would happen if I put in the Server CD and reinstalled with winnt32.exe, I know on a workstation it keeps the settings and resets most of the stuff back to the original install... would this work with a server with AD ? |
#2
|
|||
|
|||
re-run the 2000 driver Paq on the system.
SP4 was a bad idea anyway, but now you know that. Betcha didnt archive so you could roll it back, huh? NuTs "Blaze" wrote in message ... Got the service Pack crap SP4 on a Windows 2000 server had the BSOD cycle until I found it was the Network Cards..(both) causing it.. If I boot in Safe Mode and disable then boot, activate on of the cards, then reboot its OK for a few hours or min.. than crashes again this is a Proliant ML 530 with a 100 and a Gig card.. if I disable the cards the Servers stable.. I have tried reinstalling the cards, moving the cards, upgrading the drivers, reinstalling SP4... all 111 hotfixes yet all to no avail.. Still BSOD's with KMODE, and a few others like IRP, and stack errors The server is a DC, what would happen if I put in the Server CD and reinstalled with winnt32.exe, I know on a workstation it keeps the settings and resets most of the stuff back to the original install... would this work with a server with AD ? |
Thread Tools | |
Display Modes | |
|
|