If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cooling solutions
Hello,
I have an ATI 9800XT video card that to me at least seems to be running too hot. I am thinking about adding a PCI slot cooler card next to the AGP slot, but I want to know if these would be a good solution to my problem? If this would be a good solution, which brand of cooler is a good choice? I looked at vantec products and a product by PC Power Cooling solutions called "BUSS-Cool". Steve |
#2
|
|||
|
|||
My comp used to freeze after an hour or sooner of playing any
3D extensive game. My 9700Pro was hot as hell till I bought and installed VGA Arctic Silencer. Since than no problems at all. Instalation is really easy (I have revision 3). My card is Hercules 3D Prophet 9700 Pro - with copper heatsink before - not enough! 9700 nad 9800 are 0.15u technology and that is why they run really hot. 0.13u core runs much cooler. BTW my radeon has copper ramsinks on rams and I can hardly touch them ! But hot rams are no problem, as fare as you don't see visual artefacts. But hot core causes freeze. As I sad before I can recommend VGA Arctic Silencer. It runs cooler and more silent and even has 2 speed mode. And I read that it fits on X800 too and if you don't screw anythink and save your old one you can RMA it too. HTH David "Steve" wrote in message news:BO%Mc.30240$eM2.22290@attbi_s51... Hello, I have an ATI 9800XT video card that to me at least seems to be running too hot. I am thinking about adding a PCI slot cooler card next to the AGP slot, but I want to know if these would be a good solution to my problem? If this would be a good solution, which brand of cooler is a good choice? I looked at vantec products and a product by PC Power Cooling solutions called "BUSS-Cool". Steve |
#3
|
|||
|
|||
I'll second David's recommendation for the Artic Silencer Rev 3. I put one on my 9700 non-pro. I am now clocking the core at 375 with NO problems (default for the 9700np is 275). The cooler is easy to put on the board, and VERY quite. I don't like that the additional bracket (that goes in the PCI slot) is not firmly attached to the cooler though. When you move the card, you have to deal with that second bracket, which is connected to your vid card ONLY via the wire. Nonetheless, for $15, its quiet, and keeps you core VERY cool. DavidS said... My comp used to freeze after an hour or sooner of playing any 3D extensive game. My 9700Pro was hot as hell till I bought and installed VGA Arctic Silencer. Since than no problems at all. Instalation is really easy (I have revision 3). My card is Hercules 3D Prophet 9700 Pro - with copper heatsink before - not enough! 9700 nad 9800 are 0.15u technology and that is why they run really hot. 0.13u core runs much cooler. BTW my radeon has copper ramsinks on rams and I can hardly touch them ! But hot rams are no problem, as fare as you don't see visual artefacts. But hot core causes freeze. As I sad before I can recommend VGA Arctic Silencer. It runs cooler and more silent and even has 2 speed mode. And I read that it fits on X800 too and if you don't screw anythink and save your old one you can RMA it too. -- My email address is dr.who at adelphia dot net |
#4
|
|||
|
|||
DrWho
I have read somewhere in a forum or elsewhere that some versions of the Artic Silencer won't properly fit an ATI 9800XT. Is this true? Also, where can I pick up one of these Artic Silencers? Steve PS - I live in the US "DrWho" wrote in message a.net... I'll second David's recommendation for the Artic Silencer Rev 3. I put one on my 9700 non-pro. I am now clocking the core at 375 with NO problems (default for the 9700np is 275). The cooler is easy to put on the board, and VERY quite. I don't like that the additional bracket (that goes in the PCI slot) is not firmly attached to the cooler though. When you move the card, you have to deal with that second bracket, which is connected to your vid card ONLY via the wire. Nonetheless, for $15, its quiet, and keeps you core VERY cool. DavidS said... My comp used to freeze after an hour or sooner of playing any 3D extensive game. My 9700Pro was hot as hell till I bought and installed VGA Arctic Silencer. Since than no problems at all. Instalation is really easy (I have revision 3). My card is Hercules 3D Prophet 9700 Pro - with copper heatsink before - not enough! 9700 nad 9800 are 0.15u technology and that is why they run really hot. 0.13u core runs much cooler. BTW my radeon has copper ramsinks on rams and I can hardly touch them ! But hot rams are no problem, as fare as you don't see visual artefacts. But hot core causes freeze. As I sad before I can recommend VGA Arctic Silencer. It runs cooler and more silent and even has 2 speed mode. And I read that it fits on X800 too and if you don't screw anythink and save your old one you can RMA it too. -- My email address is dr.who at adelphia dot net |
#5
|
|||
|
|||
You probably right about uncompatibility with 9800XT.
Here is a compatibility list in PDF http://www.arctic-cooling.com/en/pro...ibility_en.pdf and 9800XT is not there "Steve" wrote in message news:f2hNc.33917$8_6.23563@attbi_s04... DrWho I have read somewhere in a forum or elsewhere that some versions of the Artic Silencer won't properly fit an ATI 9800XT. Is this true? Also, where can I pick up one of these Artic Silencers? Steve PS - I live in the US "DrWho" wrote in message a.net... I'll second David's recommendation for the Artic Silencer Rev 3. I put one on my 9700 non-pro. I am now clocking the core at 375 with NO problems (default for the 9700np is 275). The cooler is easy to put on the board, and VERY quite. I don't like that the additional bracket (that goes in the PCI slot) is not firmly attached to the cooler though. When you move the card, you have to deal with that second bracket, which is connected to your vid card ONLY via the wire. Nonetheless, for $15, its quiet, and keeps you core VERY cool. DavidS said... My comp used to freeze after an hour or sooner of playing any 3D extensive game. My 9700Pro was hot as hell till I bought and installed VGA Arctic Silencer. Since than no problems at all. Instalation is really easy (I have revision 3). My card is Hercules 3D Prophet 9700 Pro - with copper heatsink before - not enough! 9700 nad 9800 are 0.15u technology and that is why they run really hot. 0.13u core runs much cooler. BTW my radeon has copper ramsinks on rams and I can hardly touch them ! But hot rams are no problem, as fare as you don't see visual artefacts. But hot core causes freeze. As I sad before I can recommend VGA Arctic Silencer. It runs cooler and more silent and even has 2 speed mode. And I read that it fits on X800 too and if you don't screw anythink and save your old one you can RMA it too. -- My email address is dr.who at adelphia dot net |
#6
|
|||
|
|||
DavidS said...
You probably right about uncompatibility with 9800XT. Here is a compatibility list in PDF http://www.arctic-cooling.com/en/pro...ibility_en.pdf and 9800XT is not there Not sure about the 9800XT, but here's you can get it: http://www.newegg.com/app/ViewProduc...ion=35-186-110 -- My email address is dr.who at adelphia dot net |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Watercooling, peltiers etc,.. | Moods | Overclocking AMD Processors | 5 | February 3rd 04 08:41 AM |
COOLING SOLUTIONS FOR 9700 PRO | Gamer | Ati Videocards | 3 | January 25th 04 01:10 PM |
AI7 Temps & Water Cooling Considerations | Jim | Abit Motherboards | 7 | January 10th 04 04:28 AM |
Is liquid cooling any good? | James A. Donald | Overclocking | 30 | December 12th 03 12:55 PM |
Water vs. Air Cooling | BigBadger | Overclocking AMD Processors | 0 | August 30th 03 08:28 AM |