A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

cannot see external harddrive



 
 
Thread Tools Display Modes
  #1  
Old February 3rd 11, 11:43 AM posted to alt.comp.hardware
ealadi
external usenet poster
 
Posts: 11
Default cannot see external harddrive

I have en external HD with some important files. The Drive is
connected via USB. Two days ago the HD stopped appearing in Explorer
when plugged in. Since I cannot see the drive in Explorer I cannot
access the files. The drive does appear with it correct name (HD2Go)
in Controlpanel, System, Devices. If I right click I get the message
(in Danish) that the device is working correct. When I connect the HD
a message appears that drivers are being installed, and then that
drivers are installed and the device is working.

Thank you for any suggestion.
Erik
  #2  
Old February 3rd 11, 12:33 PM posted to alt.comp.hardware
Gerard Bok
external usenet poster
 
Posts: 177
Default cannot see external harddrive

On Thu, 3 Feb 2011 02:43:48 -0800 (PST), ealadi
wrote:

I have en external HD with some important files. The Drive is
connected via USB. Two days ago the HD stopped appearing in Explorer
when plugged in. Since I cannot see the drive in Explorer I cannot
access the files. The drive does appear with it correct name (HD2Go)
in Controlpanel, System, Devices. If I right click I get the message
(in Danish)


Ah! Your drive may only understand English :-)

that the device is working correct. When I connect the HD
a message appears that drivers are being installed, and then that
drivers are installed and the device is working.


Go to Control Panel - Administrative Tools - Computer Management
- Storage - Disk Management (local)
(Yes, you'll have to guess the translation for all of them :-)
You will probably see your external drive there, but without a
drive letter assigned to it. You can assign a letter here.

If the external drive realy is faulty, keep in mind that it is
often the USB interface electronics in the external exclosure
that is at fault. Often, placing the drive in another enclosure
or directly into a PC renders it readable again.

--
Kind regards,
Gerard Bok
  #3  
Old February 3rd 11, 01:27 PM posted to alt.comp.hardware
GlowingBlueMist[_6_]
external usenet poster
 
Posts: 146
Default cannot see external harddrive

On 2/3/2011 5:33 AM, Gerard Bok wrote:
On Thu, 3 Feb 2011 02:43:48 -0800 (PST), ealadi
wrote:

I have en external HD with some important files. The Drive is
connected via USB. Two days ago the HD stopped appearing in Explorer
when plugged in. Since I cannot see the drive in Explorer I cannot
access the files. The drive does appear with it correct name (HD2Go)
in Control panel, System, Devices. If I right click I get the message
(in Danish)


Ah! Your drive may only understand English :-)

that the device is working correct. When I connect the HD
a message appears that drivers are being installed, and then that
drivers are installed and the device is working.


Go to Control Panel - Administrative Tools - Computer Management
- Storage - Disk Management (local)
(Yes, you'll have to guess the translation for all of them :-)
You will probably see your external drive there, but without a
drive letter assigned to it. You can assign a letter here.

If the external drive really is faulty, keep in mind that it is
often the USB interface electronics in the external enclosure
that is at fault. Often, placing the drive in another enclosure
or directly into a PC renders it readable again.

Other problems can be just a confused USB section of Windows.

With your USB drive unplugged go into the control panel/services/Device
Manager (varies by Windows version on how to get there) and delete
everything under Universal Serial Buss Controllers followed by a reboot.
During the reboot Windows will "discover" the computer's USB stuff
like it would during an initial install. After the driver installs are
done try plugging in your USB drive and see if Windows loads the driver
for it and works as it used to.

Another way to get a the data on the USB drive is to boot one of the
"Live Linux" distributions from a CD,DVD, or USB drive and see if it can
access the files and possibly copy them to another drive.

A small version that works with many computers right out of the box is
Lucid Puppy which can be found at:

http://puppylinuxnews.org/releases/l...1-is-released/

The ISO file can be burned to a CD and then booted. No need to do any
install stuff if you don't want it to remain on your computer when you
are finished or to save anything during the shutdown of Puppy.

Instructions on how to create a USB flash version can be found he

http://www.pendrivelinux.com/put-luc...-from-windows/

If a Linux distribution can access the hard drive then most likely the
problem is Windows related but problems could still remain with the
drive itself as different versions of operating systems access the drive
slightly differently.



  #4  
Old February 4th 11, 08:11 PM posted to alt.comp.hardware
ealadi
external usenet poster
 
Posts: 11
Default cannot see external harddrive

On 3 Feb., 13:27, GlowingBlueMist
wrote:
On 2/3/2011 5:33 AM, Gerard Bok wrote:







On Thu, 3 Feb 2011 02:43:48 -0800 (PST), ealadi
*wrote:


I have en external HD with some important files. The Drive is
connected via USB. Two days ago the HD stopped appearing in Explorer
when plugged in. Since I cannot see the drive in Explorer I cannot
access the files. The drive does appear with it correct name (HD2Go)
in Control panel, System, Devices. If I right click I get the message
(in Danish)


Ah! Your drive may only understand English :-)


that the device is working correct. When I connect the HD
a message appears that drivers are being installed, and then that
drivers are installed and the device is working.


Go to Control Panel - Administrative Tools - Computer Management
- Storage - Disk Management (local)
(Yes, you'll have to guess the translation for all of them :-)
You will probably see your external drive there, but without a
drive letter assigned to it. You can assign a letter here.


If the external drive really is faulty, keep in mind that it is
often the USB interface electronics in the external enclosure
that is at fault. Often, placing the drive in another enclosure
or directly into a PC renders it readable again.


Other problems can be just a confused USB section of Windows.

With your USB drive unplugged go into the control panel/services/Device
Manager (varies by Windows version on how to get there) and delete
everything under Universal Serial Buss Controllers followed by a reboot.
* During the reboot Windows will "discover" the computer's USB stuff
like it would during an initial install. * After the driver installs are
done try plugging in your USB drive and see if Windows loads the driver
for it and works as it used to.

Another way to get a the data on the USB drive is to boot one of the
"Live Linux" distributions from a CD,DVD, or USB drive and see if it can
access the files and possibly copy them to another drive.

A small version that works with many computers right out of the box is
Lucid Puppy which can be found at:

http://puppylinuxnews.org/releases/l...leased/?catego...

The ISO file can be burned to a CD and then booted. *No need to do any
install stuff if you don't want it to remain on your computer when you
are finished or to save anything during the shutdown of Puppy.

Instructions on how to create a USB flash version can be found he

http://www.pendrivelinux.com/put-luc...sh-drive-from-...

If a Linux distribution can access the hard drive then most likely the
problem is Windows related but problems could still remain with the
drive itself as different versions of operating systems access the drive
slightly differently.



Hello Glowing Blue and Gerard
Thank you very much for sharing your knowledge. This information has
been useful to me, even the problem is still unresolved.
I tried to connect the faulty drive to 3 different computers, all with
the same result. The drive can be found in system devices, but it
cannot be accessed in Explorer. I went to a computer repair shop; they
told me that it has lost the partition; they are trying to recover the
files; a process I probably could do myself with a program like
GetDataBack or TestDisk
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Harddrive or External Enclosure Kevin General 4 June 3rd 08 08:37 PM
Does such a external harddrive exist? Paul General 0 April 7th 06 03:51 AM
external harddrive problem Newfdog General 1 January 18th 06 01:51 AM
External Harddrive philo General 10 May 15th 05 08:32 PM
External Harddrive Eddy Storage (alternative) 1 October 9th 03 12:57 PM


All times are GMT +1. The time now is 02:45 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.