If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
AutoDetect CPU Ratio vs Manual Imput
I just built a system using the FIC AU13 motherboard and
and AMD 2200 xp 266mhz fsb 1800 mhz cpu. Upon boot, I get the following message: Warning: CPU clock is overrunning please set cpu clock in frequency/voltage control. Autodetect gave me CPU Ratio of 13.5 and FSB of 133 mhz. Can anyone tell me what I should set these values to? (I already searched AMD and FIC sites and havn't found this info) Obviously the the FSB should be at 266 but this setting is higher than available, at least at CPU ratio of 13.5. Thanks Bob D'Spain |
#2
|
|||
|
|||
AutoDetect CPU Ratio vs Manual Imput
On Tue, 24 Jun 2003 07:05:26 -0700, Bob D'Spain wrote:
I just built a system using the FIC AU13 motherboard and and AMD 2200 xp 266mhz fsb 1800 mhz cpu. Upon boot, I get the following message: Warning: CPU clock is overrunning please set cpu clock in frequency/voltage control. Autodetect gave me CPU Ratio of 13.5 and FSB of 133 mhz. Can anyone tell me what I should set these values to? (I already searched AMD and FIC sites and havn't found this info) Obviously the the FSB should be at 266 but this setting is higher than available, at least at CPU ratio of 13.5. 13.5x133Mhz is the default for the 2200+. NeitherAMD or Intel has ever had a 266MHz FSB. The 2200+ default is 133MHz (DDR266). They like to stretch the truth a bit by using the data rate as the MHz speed. -- Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB) http://mysite.verizon.net/res0exft/cpu.html |
#3
|
|||
|
|||
AutoDetect CPU Ratio vs Manual Imput
ATHLON XP2000+ =operating speed is 266
ATHLON XP2200+ = OP speed is 266 ATHLON XP2400+ = op speed is 266 the fsb for those is 266,NOT 133. It is 133 doubled to give 266,it uses PC2100 DDR ram not 133 ram!. |
#4
|
|||
|
|||
AutoDetect CPU Ratio vs Manual Imput
On Sat, 28 Jun 2003 08:10:16 +0100, Kev wrote:
ATHLON XP2000+ =operating speed is 266 ATHLON XP2200+ = OP speed is 266 ATHLON XP2400+ = op speed is 266 the fsb for those is 266,NOT 133. It is 133 doubled to give 266,it uses PC2100 DDR ram not 133 ram!. The FSB speed is 133MHz. The data rate is what is doubled, not the speed. And PC2100 ram IS 133Mhz. The 2100 represents the data bandwidth. -- Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB) http://mysite.verizon.net/res0exft/cpu.html |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Acorp 6VIA96A manual - where? | Robert Goodwin | Homebuilt PC's | 1 | May 12th 04 01:51 PM |
Need Nero 5.5 manual | Wishy13764 | Cdr | 4 | January 3rd 04 01:09 AM |
ASUS TV FM Card Problem with Audio ? and Manual? | Tor Tverre | Asus Motherboards | 3 | July 13th 03 02:48 PM |
AutoDetect CPU Ratio vs Manual Imput | Bob D'Spain | Overclocking AMD Processors | 3 | June 28th 03 10:17 AM |
Multiplier ratio setting for Xp2400? | Barry Ward | Overclocking AMD Processors | 0 | June 24th 03 03:56 AM |