A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Gigabyte Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

7vaxp ultra sata controller bios and SATA data corruption



 
 
Thread Tools Display Modes
  #1  
Old December 1st 03, 02:18 PM
Dimitris
external usenet poster
 
Posts: n/a
Default 7vaxp ultra sata controller bios and SATA data corruption

Is there a utility to flash the bios of the onboard silicon image sata
controller? Its bios is 4.1.35c and the seagate barracude 120 has data
corruption problems. I installed a pci silicon image controller and
had to flash its bios(it came with 4.1.34!!) to 4.2.15 in order to
make it work with the Seagate.
The newest bios at the gigabyte site is F6 but the embedded bios of
the onboard controller remains 4.1.35c after i flash the mobo bios to
F6. So problems remained till i got the pci controller
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Asus P4C800 Deluxe ATA SATA and RAID Promise FastTrack 378 Drivers and more. Julian Asus Motherboards 2 August 11th 04 12:43 PM
PATA -> Serial ATA convertors - do they always work ? ZigZag Master Overclocking AMD Processors 15 August 8th 04 01:32 PM
k8vse deluxe.....question about promise vs via sata controller and some bios questions laj Asus Motherboards 0 May 7th 04 12:59 AM
Sata and Data Corruption Robert Neville General 7 April 25th 04 11:02 AM
Sata and Data Corruption Robert Neville Homebuilt PC's 7 April 25th 04 11:02 AM


All times are GMT +1. The time now is 03:34 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 HardwareBanter.
The comments are property of their posters.