Asus P4T533 Memory Dumps

You have a model that may have had some of the early-production
problems; the earliest "generally problem free" P4T533's were October
2002 production (2A vs. your 27).

RMA the board to Asus. This is a very good motherboard, and there is no
reason to put up with a flakey one.


Beaker wrote:


Ok.....I have a slight variation to what looks like a fairly common
problem. When my system starts running under a heavy load, I get the
infamous BSOD IRQ_LESS_THAN.....etc, or PAGEFAULT...blah blah blah.
I have found (so far) that if I only run 1 memory stick RIMM 4200, it
seems to stabilize itself. It doesn;t matter which stick I use, I
just can't use them both. While this might not seem like a problem ,
I really would like to use the full 512. Anyone have ideas as to why
this is happening or how I can correct it ? The cpu is a 400FSB
1.9GHz. I was planning on getting a 3.06 with HT but until I correct
this problem I was going to hold off.

I saw a post stating that certain older boards were flawed......my
parallel port has the id 27MCT01413. I have tried both a Radeon and
Geforce video card with no change. Sticking with 1 memory stick seems
to so far be the only fix.