If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Multipart-form printer wanted.
We despatch goods with 4-part dockets.
We want to print on to these 4-part dockets, which are designed to be filled out with ball-point pen. These dockets are single, that is they are not part of a continuous fan-fold system. We desperately need a printer to fill out the fields on these single 4-part forms, as required, from our invoicing system. We use Access2010. We use many single multipart forms of different length/width configurations. Clearly the printer will have to be dot-matrix, and have a printable width of 8 inches max. (200mm). The printer, we suspect, will look like a toaster, into which the single 4-part docket is inserted, then printed, then ejected. The software will be adjusted to suit the 4-part form. Does anyone make one of these? We'll pay anything! |
#2
|
|||
|
|||
Multipart-form printer wanted.
In article ,
Peter Jason wrote: We despatch goods with 4-part dockets. We want to print on to these 4-part dockets, which are designed to be filled out with ball-point pen. These dockets are single, that is they are not part of a continuous fan-fold system. We desperately need a printer to fill out the fields on these single 4-part forms, as required, from our invoicing system. We use Access2010. We use many single multipart forms of different length/width configurations. Clearly the printer will have to be dot-matrix, and have a printable width of 8 inches max. (200mm). The printer, we suspect, will look like a toaster, into which the single 4-part docket is inserted, then printed, then ejected. The software will be adjusted to suit the 4-part form. Does anyone make one of these? We'll pay anything! Peter- I suggest you contact the source of your 4-part dockets, to see what printer they recommend. Even if you solve that problem, I suspect you (or your customer) will not be satisfied with the result. It might be better to do something like print multiple copies to a laser printer, and package them with carbon paper. What if you just send a single copy to be filled out by hand? When returned, you could enter the data on the original using the computer, keep the result on your hard drive and mail a printed copy to your customer. Fred |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted: Printer/Scanner/CD./DVD printer | Trevor | Printers | 4 | March 15th 08 05:33 AM |
control Form Feed in Zebra thermal printer | [email protected] | Printers | 0 | October 11th 06 10:44 AM |
Anyone have experience with an HP4350 and multipart NCR paper? | [email protected] | Printers | 2 | November 9th 05 11:48 AM |
2 part form - printer to use? | Rover | Printers | 1 | June 27th 04 02:32 PM |
Okidata 320/321 printer and custom form | Dan | Printers | 1 | November 13th 03 11:47 PM |