If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
A8N5X SATA Controller/NV RAID and old RAID HDs
I just bought a A8N5X motherboard and have a few questions about the
A8N5X SATA Contoller and NVRAID: 1) My old board was an Abit NF7-S with the Sil 3112A SATA RAID. On the NF7-S, I had two drives striped (RAID 0) that I'd like to move to the A8N5X. Are NV RAID and Sil RAID compatible? I.E Is it possible to move these drives directly over to the A8N5X using NV RAID set to RAID 0 and go? Or will I need to reformat these drives? 2) The two drives that I'm talking about above use the Abit (Silicon Image) Parrallel ATA to Serial ATA bridge/converter. Will these bridges/converters work with the A8N5X SATA controller? Thanks for all your help, Hal |
#2
|
|||
|
|||
A8N5X SATA Controller/NV RAID and old RAID HDs
1) You can but try, but very unlikely!
If it did, by some fluke work, dont rely on the data and reformat and start again wrote in message ups.com... I just bought a A8N5X motherboard and have a few questions about the A8N5X SATA Contoller and NVRAID: 1) My old board was an Abit NF7-S with the Sil 3112A SATA RAID. On the NF7-S, I had two drives striped (RAID 0) that I'd like to move to the A8N5X. Are NV RAID and Sil RAID compatible? I.E Is it possible to move these drives directly over to the A8N5X using NV RAID set to RAID 0 and go? Or will I need to reformat these drives? 2) The two drives that I'm talking about above use the Abit (Silicon Image) Parrallel ATA to Serial ATA bridge/converter. Will these bridges/converters work with the A8N5X SATA controller? Thanks for all your help, Hal |
Thread Tools | |
Display Modes | |
|
|