If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
Hello,
I have an old DS-16B and i want to reset its configuration to defaults to have the default password as defined in the documentation. I have tried several times the front panel "Reset to defaults" but the password doesn't seem to be the default one. Any idea to reset it ? Regards, JPV |
#2
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
Login using a serial cable and then try the procedure in the manual.
"Jean-Paul VILLETTE" wrote in message ... Hello, I have an old DS-16B and i want to reset its configuration to defaults to have the default password as defined in the documentation. I have tried several times the front panel "Reset to defaults" but the password doesn't seem to be the default one. Any idea to reset it ? Regards, JPV |
#3
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
Hello,
There is no serial cable on this model. The DS-16B doesn't have one but the DS-8B have one. I have a DS-16B, and that's the problem. Any way, thanks. JPV Nabeel Ahmed a écrit : Login using a serial cable and then try the procedure in the manual. "Jean-Paul VILLETTE" wrote in message ... Hello, I have an old DS-16B and i want to reset its configuration to defaults to have the default password as defined in the documentation. I have tried several times the front panel "Reset to defaults" but the password doesn't seem to be the default one. Any idea to reset it ? Regards, JPV |
#4
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
This can be tricky sometimes. Serial port is not intended for most
users as it can be a security concern. I looked at the available diagrams and manuals on the DS-16B. They refer to the serial port but don't explicitly spell out it's location. I would recommend checking the backside to find out if there is a small panel that is closed with a Torx screw (star-shaped) or removing the front panels to see if it's hidden behind them. - Gun On Feb 14, 4:26 am, Jean-Paul VILLETTE wrote: Hello, There is no serial cable on this model. The DS-16B doesn't have one but the DS-8B have one. I have a DS-16B, and that's the problem. Any way, thanks. JPV Nabeel Ahmed a écrit : Login using a serial cable and then try the procedure in the manual. "Jean-Paul VILLETTE" wrote in message ... Hello, I have an old DS-16B and i want to reset its configuration to defaults to have the default password as defined in the documentation. I have tried several times the front panel "Reset to defaults" but the password doesn't seem to be the default one. Any idea to reset it ? Regards, JPV |
#5
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
Hello,
I think the reference to the serial port is only for DS-8B. I tried to find an hidden one on the DS-16B without any success. Several google searches speak about a "recovery password" with the installation of a specific firmware... i don't have details... Any other idea ? Regards, Jean-Paul VILLETTE Gunhaver05 a écrit : This can be tricky sometimes. Serial port is not intended for most users as it can be a security concern. I looked at the available diagrams and manuals on the DS-16B. They refer to the serial port but don't explicitly spell out it's location. I would recommend checking the backside to find out if there is a small panel that is closed with a Torx screw (star-shaped) or removing the front panels to see if it's hidden behind them. - Gun On Feb 14, 4:26 am, Jean-Paul VILLETTE wrote: Hello, There is no serial cable on this model. The DS-16B doesn't have one but the DS-8B have one. I have a DS-16B, and that's the problem. Any way, thanks. JPV Nabeel Ahmed a écrit : Login using a serial cable and then try the procedure in the manual. "Jean-Paul VILLETTE" wrote in message ... Hello, I have an old DS-16B and i want to reset its configuration to defaults to have the default password as defined in the documentation. I have tried several times the front panel "Reset to defaults" but the password doesn't seem to be the default one. Any idea to reset it ? Regards, JPV |
#6
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
Contact EMC or use EMC's cite.
-- Maxim Shatskih, Windows DDK MVP StorageCraft Corporation http://www.storagecraft.com "Jean-Paul VILLETTE" wrote in message ... Hello, I think the reference to the serial port is only for DS-8B. I tried to find an hidden one on the DS-16B without any success. Several google searches speak about a "recovery password" with the installation of a specific firmware... i don't have details... Any other idea ? Regards, Jean-Paul VILLETTE Gunhaver05 a écrit : This can be tricky sometimes. Serial port is not intended for most users as it can be a security concern. I looked at the available diagrams and manuals on the DS-16B. They refer to the serial port but don't explicitly spell out it's location. I would recommend checking the backside to find out if there is a small panel that is closed with a Torx screw (star-shaped) or removing the front panels to see if it's hidden behind them. - Gun On Feb 14, 4:26 am, Jean-Paul VILLETTE wrote: Hello, There is no serial cable on this model. The DS-16B doesn't have one but the DS-8B have one. I have a DS-16B, and that's the problem. Any way, thanks. JPV Nabeel Ahmed a écrit : Login using a serial cable and then try the procedure in the manual. "Jean-Paul VILLETTE" wrote in message ... Hello, I have an old DS-16B and i want to reset its configuration to defaults to have the default password as defined in the documentation. I have tried several times the front panel "Reset to defaults" but the password doesn't seem to be the default one. Any idea to reset it ? Regards, JPV |
#7
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
Hello,
Thanks. I just tried by i don't think this action will be free of charge... In Progress ... If someone has an other idea ..... Regards, Jean-Paul VILLETTE Maxim S. Shatskih a écrit : Contact EMC or use EMC's cite. |
#8
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
Jean-Paul VILLETTE Wrote: Hello, I have an old DS-16B and i want to reset its configuration to defaults to have the default password as defined in the documentation. I have tried several times the front panel "Reset to defaults" but the password doesn't seem to be the default one. Any idea to reset it ? Regards, JPVIf you want to call here one of my teshs will help my # 781 982 9664 ask for Paul Leeber -- PAUL LEEBER |
#9
|
|||
|
|||
EMC DS-16B ... resetting to defaults password
EMC quotes solution ID 1.0.184245148.2873664. It states that an EMC
rep will be required to perform the reset. On Feb 14, 4:08 pm, Jean-Paul VILLETTE wrote: Hello, Thanks. I just tried by i don't think this action will be free of charge... In Progress ... If someone has an other idea ..... Regards, Jean-Paul VILLETTE Maxim S. Shatskih a écrit : Contact EMC or use EMC's cite.- Hide quoted text - - Show quoted text - |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HP Pavilion ZE4600 Power on Password | madscientist | General | 0 | August 29th 05 11:24 PM |
resetting Toshiba Satellite BIOS password - need toshiba manuals | blq knight | General | 2 | December 1st 04 07:35 PM |
Laptop Security | ajh | Dell Computers | 25 | August 12th 04 09:21 AM |
Help With Locked Hard Drive | Louis Bybee | Storage (alternative) | 29 | November 22nd 03 03:01 PM |
resetting the password of an ECS P61EAT motherboard BIOS | bck2bzh | General Hardware | 2 | November 13th 03 11:34 AM |