If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
New HD in Dell Dimension 4300?
I own a Dell Dimension 4300. I want to install a new 120GB hard drive
in it, with 40GB extra for Windows and 80GB for a new SuSE Linux installation. I have a few questions: 1) Which hard drive would everyone reccomend? I don't need something incredibly fast, but not really slow either. I'm hoping to spend less than $200 on the hard drive. 2) According to the Dell website (http://support.ap.dell.com/docs/syst...ce.htm#1124764 step 8), I should install the new hard drive in the upper bay and move the existing one into the lower bay. Why can't I install the new one in the lower bay? 3) I'm planning to buy an anti-static mat and wrist strap. Should I just touch the metal on the computer like Dell says? 4) Once I install the hard drive, how would I correctly partition it for my purposes? I'm guessing I would make a 40GB partition for Windows and let the SuSE installer make the other. How would I do that, or is it the correct way? |
#2
|
|||
|
|||
"Leif K-Brooks" wrote in message ... I own a Dell Dimension 4300. I want to install a new 120GB hard drive in it, with 40GB extra for Windows and 80GB for a new SuSE Linux installation. I have a few questions: 1) Which hard drive would everyone reccomend? I don't need something incredibly fast, but not really slow either. I'm hoping to spend less than $200 on the hard drive. You could get a bunch of options for the 120GB hard drive for under $200. Because your system does not support SATA (Serial ATA, a faster type of hard drive), you won't need to worry about spending over $200. I would recommend the Western Digital Caviar line, which uses a high RPM speed and large cache, resulting in increased performance. Maxtor also has the same 7200RPM/8MB cache hard drives for about the same price (buy whichever's on sale). Try to get an ATA/133 drive. These are backwards compatible with whatever hard drive you're using right now, and will run at the fastest speed available if possible (or if you upgrade your computer further). 2) According to the Dell website (http://support.ap.dell.com/docs/syst...ce.htm#1124764 step 8), I should install the new hard drive in the upper bay and move the existing one into the lower bay. Why can't I install the new one in the lower bay? 1. Don't listen to Dell, they're a bunch of people who can't speak english and don't know computers enough to save their life. 2. The only reason that they're saying this is because they probably assume that you'd want the new hard drive to be the master (main) hard drive. Because both hard drives fit on the same ribbon cable, the only way you would be able to fit the cable on both hard drives was if the master was in the upper bay (or if the two hard drives were upside down). 3. From what I understand, you'll just be throwing out the old hard drive so this doesn't matter anyways. But I'd recommend keeping that old hard drive in your case for increased storage. 4. Use the hard drive manufacturer's instructions and software. It'll be much easier to understand and more relevant. 3) I'm planning to buy an anti-static mat and wrist strap. Should I just touch the metal on the computer like Dell says? Yeah, don't worry about the antistatic stuff. The only time you really need that is when you'll be working on the computer for an extended period of time, like when replacing the motherboard. In fact, I have even touched my motherboard while the computer was plugged in (oops) and the hard power was on (double oops) a few times but nothing happened. Therefore, I am biased to say that the antistatic strap is really unnecessary. Just make sure to touch the case before touching anything. That, and make sure that the power's off. I refuse to take responsibility if you go home and try leaving it plugged in. :-) 4) Once I install the hard drive, how would I correctly partition it for my purposes? I'm guessing I would make a 40GB partition for Windows and let the SuSE installer make the other. How would I do that, or is it the correct way? Your hard drive should come with software to partition the hard drive. I would recommend using that software rather than mucking about with the installer. Mixing linux and windows installers could mean mixing dos partitions and whatever linux uses (sorry I don't use it). This could cause a real strain on the two OSes. Usually it's easier (nicer user interface) to use the software which came with the hard drive as well. Maxtor has a particularily easy-to-manage user interface which I had the pleasure of using. Unfortunately their "quick format" which they brag about actually doesn't work. Just reformat the hard drive after setting up the partitions (and after it claims that the partition(s) has/have been formatted) Good luck -- MiniDisc_2k2 To reply, replace nospam.com with cox dot net. |
#3
|
|||
|
|||
MiniDisc_2k2 wrote:
You could get a bunch of options for the 120GB hard drive for under $200. Because your system does not support SATA (Serial ATA, a faster type of hard drive), you won't need to worry about spending over $200. I would recommend the Western Digital Caviar line, which uses a high RPM speed and large cache, resulting in increased performance. Maxtor also has the same 7200RPM/8MB cache hard drives for about the same price (buy whichever's on sale). Try to get an ATA/133 drive. These are backwards compatible with whatever hard drive you're using right now, and will run at the fastest speed available if possible (or if you upgrade your computer further). Hmm... thanks. They look about right. The only reason that they're saying this is because they probably assume that you'd want the new hard drive to be the master (main) hard drive. Because both hard drives fit on the same ribbon cable, the only way you would be able to fit the cable on both hard drives was if the master was in the upper bay (or if the two hard drives were upside down). Actually, it looks like the slave has to go in the middle of the cable, which puts it on the top. From what I understand, you'll just be throwing out the old hard drive so this doesn't matter anyways. But I'd recommend keeping that old hard drive in your case for increased storage. No, I'm keeping it for my Windows installation. The second HD will just be used for Linux and extra space for Windows. Yeah, don't worry about the antistatic stuff. The only time you really need that is when you'll be working on the computer for an extended period of time, like when replacing the motherboard. In fact, I have even touched my motherboard while the computer was plugged in (oops) and the hard power was on (double oops) a few times but nothing happened. Therefore, I am biased to say that the antistatic strap is really unnecessary. Just make sure to touch the case before touching anything. That, and make sure that the power's off. I refuse to take responsibility if you go home and try leaving it plugged in. :-) I'll probably get one anyway, simply because I'm a coward. :-) Your hard drive should come with software to partition the hard drive. I would recommend using that software rather than mucking about with the installer. I don't see why the SuSE installer wouldn't be able to figure out what to do with 80GB of unpartitioned space if I tell it to. It does have an option to use free space... Mixing linux and windows installers could mean mixing dos partitions and whatever linux uses (sorry I don't use it). This could cause a real strain on the two OSes. How is that a strain on the OSes? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
17" Dell Flat Panel Screen | nECrO | General | 3 | July 4th 03 06:40 AM |
Dell (Ignore if not in UK) | Audrey | General | 2 | July 1st 03 02:10 PM |